Operating Instructions 150 000 019 00 EN

2.6 Converting from transport toworking positionWhen the outer swather discs are beinglowered, no persons may be allowed toenter the swivel area of the outer swatherdiscs.Only for KW 7.70/6x7 and KW 8.80/8Move the undercarriage wheel (2) on the secondswather disk forward into working position. Secure withthe bolt (1) and linch pin.NOTE:Observe the position of the individual wheels whenlowering into working position. (see chapter"Adjusting the swather disk spreading angle")21KWT-0-014Select the position "Lower/raise outer swather discs"on the switchover valve.KW 5.50/4x7; KW 6.70/6 and KW 7.70/6x7Activate the single action control valve on the tractorand pressurize the hydraulic cylinder. This relieves thepressure on the locking device (2). Pull the controlcable (1) to release the locking device (2). Keep thecable taut. Slowly lower the outer swather discs with thecontrol valve until the wheels rest on the ground.12When in use, leave the control valve in the„Lower“ position.KW-0-012KW 8.80/8Open the shut-off valve (1) and actuate the doubleactingcontrol valve on the tractor and slowly lower theouter swather disks.1When in use, leave the control valve in the„Float Position“.KW-4-00116