Operating Instructions 150 000 019 00 EN

More documents

Recommendations

Info

1.3 Technical dataType KW 550/4x7 KW 670/6 KW 770/6x7KW 880/8Working width [mm] 5500 6700 7700 8800Number of swather discs 4 6 6 8Tine arms per swather disc 7 6 7 6Surface covered [appr. ha/hr] 5.5 6.7 7.7 8.8Width in transport position [mm] 2930 2950 2980 2980Height in transport position [mm] 2800 3250 3500 3450Power consumption [KW/HP] 37/50 37/50 44/60 55/75Max. allowable hydraulic pressure200 barPto shaft speed [max. rpm] 540 540 540 540Weight [kg] 640 800 890 1100Equivalent continuous sound pressure levelunder 70 d B(A)Tyres for all types, 16/ 6.50 x 8 18/8.50/8only middleThree-point mounting with quick coupler andrun-on mechanismEdge spreading mechanism [hydr.]Spreading angle adjustmenAdditional tine loss protectionPlug-in gearbox for night swathingLighting unitStandard equipmentStandard equipmentStandard equipmentSpecial accessorySpecial accessory12 VoltLubricant quantities and lubricant types for the gearboxThe main gearbox of the rotary tedder has a permanent grease lubrication and operates without anymaintenance.10
2. Preparations for use2.1. Special safety instructions• In all care, maintenance, repair and assembly work on the rotary tedder the PTO shaft mustalways be switched off. Switch off the engine and remove the ignition key. Take measuresto prevent the tractor and rotary tedder from rolling!• The maximum drive speed is 540 rpm.• Control elements such as ropes, cables, hydraulic hoses and electrical cables must be sorouted that accidental activation and contact with the tractor wheels are impossible.Accident risk!• When raising and lowering the rotary tedder, no persons may be allowed to go between thetractor and the rotary tedder. High risk of injury!• When lowering the outer swather discs, make sure that no persons are in the swivel area ofthe swather discs Accident risk!• Before you switch on the PTO shaft, make sure that no persons are in the danger zone ofthe rotary tedder. Accident risk!• Make sure that the protective features are correctly fitted during operation and when drivingthe tractor on public roads. Fit the lighting and check that it works.• The operating personnel must not leave the tractor when the rotary tedder is in operation!Safety instructions for the hydraulic system• The hydraulic system is under pressure!• Hydraulic oil that squirts out under high pressure can cause severe injury. Consult a doctorimmediately if such injuries occur. Risk of infection!• Check hydraulic hoses and pipes regularly, and replace them if they are damaged or worn.The replacement hoses and pipes must conform to the requirements of the manufacturer ofthe machine!• When connecting hydraulic hoses, take care to ensure that the hydraulic system in both thetractor and the attachment is depressurized.2.2. Preparations on the tractor and rotary tedderWhen fitting the bracket to the tractor,make sure that the switchover valve iseasily accessible and the hydraulichoses (3) do not obstruct the driver.Hose lines may must not be placed inthe cabin.2 3Fix the bracket (1) for the hydraulic switchover valve (2)to the tractor. Make sure that the hydraulic hoses arenot pulled tight or trapped when the attachment israised and lowered.1KW-0-00311
Page 1 and 2: Rotary tedderKW 5.50 / 4 x 7KW 6.70
Page 3 and 4: I. ForewordDear customer,Ordering R
Page 5 and 6: III. General1. Operation in Accorda
Page 7 and 8: 5. Hydraulic System1. The hydraulic
Page 9 and 10: 1Do not exceed themaximum permitted
Page 11: 1440 135-3 (1x) bei KW 5.50939 429-
Page 15 and 16: PTO shaftAfter the rotary tedder ha
Page 17 and 18: 2.4 Adjusting the PTO shaft length
Page 19 and 20: 2.7 Conversion from working totrans
Page 21 and 22: Switch off the engine and remove th
Page 23 and 24: 3.3 Drive rpmsWide spreading (teddi
Page 25 and 26: 3.7 Tine adjustmentThe tines (3) mu
Page 27 and 28: 4.3 HydraulicsThe rotary tedder has
Page 29 and 30: Lubrication points on the KW 6.70 /
Page 31 and 32: 5. Winter storage5.1 Safety instruc
Page 33 and 34: 7. Special accessories7.1 Night swa
Page 35 and 36: 7.3 Wheel guards• For all service
Page 37: 7.4 Fixed lightingA permanently fix
Page 40 and 41: 1. Special safety instructions• P
Page 42 and 43: 4. Mounting the disc arms to the di
Page 44 and 45: Bolt the front protective frame (2)
Page 46 and 47: 5.3 Mounting of the protective fram
Page 48: KW 6.70/6, KW 7.70/6x7 and KW 8.80/

Operating Instructions 150 000 019 00 EN

Create successful ePaper yourself

Delete template?

Save as template?