ATV61 LON WORK - error

11. Network variables and configuration properties11. 11. Adjustmentb Maximum Motor Speed (nciMaxSpeed)This configuration property is used to define the maximum speed of the motor.The value is entered as a percent of nominal speed in RPM, as defined by the Nominal Speed (nciNmlSpeed) configuration value. Thevalue of the maximum speed must be validated against the value of the minimum speed as follows:-163.840 y minimum speed y maximum speed y 163 830NameSCPT referenceSCPT index 50SNVT referenceSNVT index 81nciMaxSpeedUnit 0.005%SCPTmaxSetpointSNVT_lev_percentRange -163 840% ... 163 830%163 835% = 32 767 = 0x7FFF: invalidDefault value 100 000%DefinitionMaximum Motor SpeedThis network variable is not linked to the drive parameter [High speed] (HSP).See note on next page.b Minimum Motor Speed (nciMinSpeed)This configuration property is used to define the minimum speed of the motor.The value is entered as a percent of nominal speed in RPM, as defined by the Nominal Speed (nciNmlSpeed) configuration value. Thevalue of the minimum speed must be validated against the value of the maximum speed as follows:-163 840 y minimum speed y maximum speed y 163 830NameSCPT referenceSCPT index 53SNVT referenceSNVT index 81nciMinSpeedUnit 0.005%SCPTminSetpointSNVT_lev_percentRange -163 840% ... 163 830%163 835% = 32 767 = 0x7FFF: invalidDefault value 0.000%DefinitionMinimum Motor SpeedThis network variable is not linked to the drive parameter [Low speed] (LSP).See note on next page.46