ATV61 LON WORK - error

11. Network variables and configuration propertiesb Object Status (nvoStatus)This output network variable indicates various status within the drive.NamenvoStatusSNVT referenceSNVT_obj_statusSNVT index 93DefinitionObject StatusMember nameobject_idinvalid_idinvalid_requestdisabledout_of_limitsopen_circuitout_of_servicemechanical faultfeedback_failureover_rangeunder_rangeelectrical_faultunable_to_measurecomm_failurefail_self_testself_test_in_progresslocked_outmanual_controlin_alarmin_overridereport_maskprogramming_modeprogramming_failalarm_notify_disabledreset_completeDescriptionReturns the value written to object_id of object request (nviRequest).(Mandatory for LonMark Node Object)1 means requested ID is not implemented in the drive.(Mandatory for LonMark Node Object)1 means request is not implemented in the drive.1 means object disabled.Not supported.Not supported.Not supported.Not supported.Not supported.Not supported.Not supported.Not supported.Not supported.1 reports the [internal com. link] (ILF) fault.Not supported.Not supported.Not supported.Not supported.1 means the drive is in fault or in alarm condition.Not supported.1 means nvoStatus is an event mask.When RQ_REPORT_MASK is required by nvi_request, nvoStatus reports as "1" the supported status bit(invalid_id, invalid_request, disabled, comm_failure, in_alarm, report_mask).(Mandatory for LonMark Node Object)Not supported.Not supported.Not supported.Not supported.36