ATV61 LON WORK - error

9. Diagnostics9. 1. LEDs of the cardThe LonWorks card of ATV61 is equipped with 3 LEDs (“Service”, “Status”, “Fault”)1.11.21.31.41.52.12.22.32.42.5ServiceStatusLonWorks faultNb Name Colour State Description2.1 Service Red Off Normal stateFlashingNot configured (the LonWorks card needs to be commissioned fromLonWorks).When a reset command is received, the service led flashes once.OnApplication less (the software needs to be loaded in the neuron chip of theLonWorks card).Service pin depressed2.2 Status Green Off Not configured (not commissioned) or fault.FlashingAfter power up, before the communication starts.Configured (commissioned) but waiting for reset.> If flashing alternatively with fault led during 30s: wink command has beenreceived from LonWorksOnNormal state (configured and operational)2.3 Fault Red Off No faultFlashingLonWorks communication fault: [Com. network] (CnF)> If flashing alternatively with fault: wink command signal has beenreceivedOnHardware or software fault of the LonWorks card or in the link between thedrive and the LonWorks card: [internal com. link] (ILF)23