ATV61 LON WORK - error

More documents

Recommendations

Info

8. Configurationb Control via LonWorks and setpoint switchingThe command comes from LonWorks.The setpoint comes either from LonWorks or from the terminals.Depending on the configuration, the application function are activated or not.2 different use cases are described below. The setpoint is switched from LonWorks to the terminals. In the first case, the application functionapplies and not in the second one.17
8. ConfigurationControl via LonWorks and switching of the setpoint at the terminals with application functionThe command comes from LonWorks. Input LI5 is used to switch the setpoint between LonWorks and the terminals. When switched to theterminals, the application functions (summing…) remain active.Configure the following parameters:Parameter Value CommentProfile Separate profile The commandand the setpoint can come from different channels.Setpoint 1 configuration Network card Setpoint 1 comes from LonWorks.Setpoint 1B configuration Analog input 1 on the terminals Setpoint 1B comes from input AI1 on the terminals.Setpoint switching Input LI5 Input LI5 switches the reference (1 ↔ 1B).Command 1 configuration Network card Command 1 comes from LonWorks.Command switching Channel 1 Channel 1 is the command channel.Reference 1B is directly connected to the functions of the drive. If switching to the terminals is performed, the functions that affect thereference (summing, PID, etc) are active.Configuration via the graphic display terminal or the integrated display terminal:Menu Parameter Value[1.6 - COMMAND] (CtL-) [Profile] (CHCF) [Separate] (SEP)[Ref.1 channel] (Fr1)[Com. card] (nEt)[Cmd channel 1] (cd1)[Com. card] (nEt)[Cmd switching] (CCS)[ch1 active] (Cd1)[1.7 - APPLICATION FUNCT.] (FUn-) [Ref.1B channel] (Fr1b)[Ref. AI1] (AI1)[REFERENCE SWITCH][Ref.1B switching] (rCb)[LI5] (LI5)18
Page 6: 2. Before you beginRead and underst
Page 10 and 11: 6. Hardware setup6. 1. Receipt• C
Page 12 and 13: 7. Connecting to the bus7. 2. Cable
Page 14 and 15: 8. Configuration8. 1. Service pinTh
Page 16 and 17: 8. ConfigurationSwitching of contro
Page 20 and 21: 8. ConfigurationControl via LonWork
Page 22 and 23: 8. Configuration8. 4. Communication
Page 24 and 25: 9. Diagnostics9. 1. LEDs of the car
Page 26 and 27: 9. Diagnostics9. 3. Communication s
Page 28 and 29: 10. Functional profileb Objects sup
Page 30 and 31: 11. Network variables and configura
Page 36 and 37: Network variables and configuration

ATV61 LON WORK - error

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?