ATV61 LON WORK - error

8. ConfigurationSwitching of control and setpoint from LonWorks to the terminals without application functionInput LI5 is used to switch the control and the setpoint between LonWorks and the terminals. When switched to the terminals, the applicationfunctions (summing…) are not active.Configure the following parameters:Parameter Value CommentProfile Non separate profile The command and the setpoint come from the same channel.Setpoint 1 configuration Network card Setpoint 1 and command 1 comes from LonWorks.Setpoint 2 configuration Analog input 1 on the terminals Setpoint 2 and command 2 comes from input AI1 on the terminals.Setpoint switching Input LI5 Input LI5 switches the setpoint (1 ↔ 2) and the command.Configuration via the graphic display terminal or the integrated display terminal:Menu Parameter Value[1.6 - COMMAND] (CtL-) [Profile] (CHCF) [Not separ.] (SIM):default value[Ref.1 chan] (Fr1)[Com. card] (nEt)[Ref.2 chan] (Fr2)[AI1 ref.] (AI1)[Ref.2 switching] (rFC)[LI5] (LI5)16