ATV61 LON WORK - error

8. ConfigurationSwitching of control and setpoint from LonWorks to the terminals with application functionInput LI5 is used to switch the control and the setpoint between LonWorks and the terminals. When switched to the terminals, the applicationfunctions (summing…) remain active.Configure the following parameters:Parameter Value CommentProfile Separate profile The command and the setpoint can come from different channels.Setpoint 1 configuration Network card Setpoint 1 comes from LonWorks.Setpoint 1B configuration Analog input 1 on the terminals Setpoint 1B comes from input AI1 on the terminals.Setpoint switching Input LI5 Input LI5 switches the setpoint (1 ↔ 1B).Command 1 configuration Network card Command 1 comes from LonWorks.Command 2 configuration Terminals Command 2 comes from the terminals.Command switching Input LI5 Input LI5 switches the commandSetpoint 1B is directly connected to the functions of the drive. If switching to the terminals is performed, the functions that affect thereference (summing, PID, etc) are active.Configuration via the graphic display terminal or the integrated display terminal:Menu Parameter Value[1.6 - COMMAND] (CtL-) [Profile] (CHCF) [Separate] (SEP)[Ref.1 channel] (Fr1)[Com. card] (nEt)[Cmd channel 1] (cd1)[Com. card] (nEt)[Cmd channel 2] (cd2)[Terminals] (tEr)[Cmd switching] (CCS)[LI5] (LI5)[1.7 - APPLICATION FUNCT.] (FUn-) [Ref.1B channel] (Fr1b)[Ref. AI1] (AI1)[REFERENCE SWITCH][Ref.1B switching] (rCb)[LI5] (LI5)15