Download Nuflo Liquid Turbine Flow Meter ... - Proflow Systems

MEASUREMENT SYSTEMSGrooved End ConnectionFlowmeters with grooved end connections are available in7/8-in. through 8-in. sizes.Flowmeter Size x Length Working PressureEnd Connection Size in. mm psi MPa7/8 x 1 in. 4.0 102 1000 6.91 x 1 in. 4.0 102 1000 6.91-1/2 x 1-1/2 in. 6.0 152 1000 6.91-1/2 x 2 in. 6.0 152 1000 6.91-1/2 x 2 in. 6.0 152 2500 17.22 x 2-1/2 in. 10.0 254 1000 6.93 x 3 in. 12.5 318 1000 6.94 x 4 in. 12.0 305 1000 6.96 x 6 in. 12.0 305 800 5.58 x 8 in. 12.0 305 800 5.5WECO ® 1502 Union End ConnectionFlowmeters with 1502 end connections are commonly usedin high-pressure oilwell service applications. Meter sizes 1”,11/2” and 2” have 2” union end connections with a wing nuton one end and thread on the other end. The 3" meters have3" union end connections with the option of a wing nut onone end and thread on the other, or threads on both ends.All 1502 union end meters have two pickup adapters.Flowmeter Size x Length Working PressureEnd Connection Size in. mm psi MPa1 x 2 in. 8.00 203.3 15000 1031-1/2 x 2 in. 8.60 218.4 15000 1032 x 2 in. 9.00 228.6 15000 1033 x 3 in. 13.0 330.2 15000 103WECO ® is a federally registered trademark of FMC Technologies, Inc.EZ-IN ® End ConnectionSeries BF turbine flowmeters with EZ-INconnections provide a cost-effectivealternative to typical flanged-meterapplications. Series BF meters withEZ-IN connections offer the accuracy,rugged construction, and maintenancefreeoperation of conventional NuFloflowmeters plus the followingadvantages:• Lower installation cost.• Less expensive than a conventional,flanged meter.• Spreader nuts enable easy removaland inspection.• The raised-face EZ-IN meter willmate to any flange rated ANSI 150#to 1500#. The ring-joint (RTJ)version will mate to ANSI 900#,1500# or 2500# RTJ flange. Specifyflange type when ordering.• CE-marked 8 x 8-in. EZ-IN RFrequires special centering rings.Specialized Flowmeters• High-pressure • Nitrogen•CO 2• Cement-slurry• Corrosive-service • Drilling fluidsContact Cameron's MeasurementSystems division for applicationassistance.Flowmeter Size xRaised Face Flange Lengths, in. (mm)End Connection Size 1 in. 2 in. 3 in. 4 in. 6 in. 8 in.3/8 x 1 in. 4.0 (102) –– –– –– –– ––3/8 x 2 in. –– 2.5 (63.5) –– –– –– ––1/2 x 1 in. 4.0 (102) –– –– –– –– ––1/2 x 2 in. –– 2.5 (63.5) –– –– –– ––3/4 x 1 in. 4.0 (102) –– –– –– –– ––3/4 x 2 in. –– 2.5 (63.5) –– –– –– ––7/8 x 1 in. 4.0 (102) –– –– –– –– ––7/8 x 2 in. –– 2.5 (63.5) –– –– –– ––1 x 1 in. 4.0 (102) –– –– –– –– ––1 x 2 in. –– 2.5 (63.5) –– –– –– ––1-1/2 x 2 in. –– 2.5 (63.5) –– –– –– ––2 x 2 in. –– 2.5 (63.5) –– –– –– ––3 x 3 in. –– –– 4.25 (108) –– –– ––4 x 4 in. –– –– –– 5.0 (127) –– ––6 x 6 in. –– –– –– –– 5.75 (146.1) ––8 x 8 in. –– –– –– –– –– 6.25 (158.8)Ring Joint Flange Lengths, in. (mm)1 x 2 in. –– 3.5 (88.9) –– –– –– ––1-1/2 x 2 in. –– 3.5 (88.9) –– –– –– ––2 x 2 in. –– 3.5 (88.9) –– –– –– ––3 x 3 in. –– –– 4.25 (108) –– –– ––4 x 4 in. –– –– –– 5.0 (127) –– ––6 x 6 in. –– –– –– –– 5.75 (146.1) ––8 x 8 in. –– –– –– –– –– 6.25 (158.8)5