BI Comb SGM.GB

BI Comb SgmGENERAL INDEX1. TECHNICAL SPECIFICATIONS BI Comb Sgm AC-ASL-ASH2. TECHNICAL SPECIFICATIONS BI Comb Sgm HP-HP12-HP153. FUEL FEED SYSTEM3.1 Solid fuel3.1.1 Automatic hopper feed systems4. MECHANICAL FURNACE AND MOBILE GRATE FEEDER4.1 Combustion logic4.2 Main components4.2.1 Storage hopper for granular fuel4.2.2 Feed screw with relative motor and drive mechanisms4.2.3 Combustion air fans with relative ducts4.2.4 Furnace in combustion chamber4.2.5 Mobile grate and its motor and drive mechanisms4.2.6 Ash discharge screw with its motor and drive mechanisms4.3 Fire safety4.3.1 Fire prevention system hydraulic connection diagram4.4 Continuous modulation of the heat input4.5 Use of traditional fuel, DIESEL - FUEL OIL - GAS4.5.1 Pilot burner4.5.2 Alternative burner4.6 Dumped ash removal4.6.1 Ash removal to bin4.6.2 Direct ash removal, to underground bin4.6.3 Indirect ash removal, to underground bin4.6.4 Direct ash removal, to the multiple centrifugal dust separator4.7 Soot blowers5. INITIAL COMMISSIONING5.1 Initial commissioning procedure5.2 Boiler shut-down procedure5.3 Start-up5.4 Special calibration for the modulating model5.5 Calibrating the automatic draught register5.6 Operating tests on the pressurised part5.7 Cleaning the combustion grate3