Specalog for 994F Wheel Loader, AEHQ5640-01 - Teknoxgroup

Hydraulic Cycle TimeRackbackRaiseDumpLower Float Down (Empty)Power Down5.5 Seconds11.3 Seconds3.1 Seconds3.5 Seconds6.7 SecondsBrakesBrakes SAE J1473 OCT 90,ISO 3450:1992CabService Refill CapacitiesFuel Tank 3833 L 1,013 galCooling System 490 L 129 galCrankcase 286 L 75.5 galTransmission 350 L 92 galDifferentials and 621 L 164 galFinal Drives – FrontDifferentials and 621 L 164 galFinal Drives – RearDifferential/Final Drives (each) 621 L 164 galHydraulics – Lift/Tilt 390 L 103 galHydraulics – Brake Cooling 36 L 9 galHydraulics – Steering/Brake 208 L 55 galPump Drive – Front 7 L 2 galHydraulic System (including tank) 893 L 235.91 galDimensionsHinge Pin Height at Full Lift – Std 8157 mm 26 ft 10 in• Standard machine with 53.5/85-57 tires and 19 m 3 (24.5 yd 3 )5639 mm (222 in) spade edge rock bucket with teeth andsegments.• High-Lift machine with 53.5/85-57 tires and 18 m 3 (23.5 yd 3 )6223 mm (245 in) spade edge rock bucket with teeth andsegments.BucketsBucket Capacities 14 – 36 m 3 18.5 – 47 yd 3AxlesMaximum Single-Wheel Rise 677 mm 26.65 inand FallFrontFixedRearTrunnionOscillation Angle ±10°Air ConditioningStandard air conditioningsystem containsenvironmentally friendlyR134a refrigerantCab – ROPS/FOPSSAE J1394, SAE J11040APR88, ISO 3471-1:1986,ISO 3471:1994Caterpillar cab with separate Rollover Protective Structure/Falling Object Protective Structure (ROPS/FOPS) is standardin North America, Europe and Japan.• ROPS meets SAE J394, SAE J1040 APR 88, ISO 3471-01:1986and ISO 3471:1994 criteria.• FOPS meets SAE J231 JAN 81 and ISO 3449:1992 Level IIcriteria.Sound Performance ISO 6394:1998The operator sound exposure Leq (equivalent sound pressurelevel) measured according to the work cycle proceduresspecified in ANSI/SAE J1166 OCT98 is 75 dB(A), for the caboffered by Caterpillar, when properly installed, maintainedand tested with the doors and windows closed.• Hearing protection may be needed when operating with anopen operator station and cab (when not properly maintainedor doors/windows open) for extended periods or in noisyenvironment.• The exterior sound pressure level for the standard machinemeasured at a distance of 15 m (49.2 ft) according to the testprocedures specified in SAE J88 JUN86, mid-gear-movingoperation, is 87 dB(A).• The sound power level is 115 dB(A) measured accordingto the dynamic test procedure and conditions specifiedin ISO 6395:1988/Amd. 1:1996 for a standard machineconfiguration.VibrationEC 89/392 EECHydraulic System – SteeringSteering System – CircuitSteering System – PumpClosedPiston, variabledisplacementMax Flow @ 1,710 rpm (6900 kPa) 884 L/min 234 gal/min(2x)Relief Valve Setting – Steering 3100 kPa 4,500 psiNumber of Steering Pumps 2994F Wheel Loader specifications19