Ives Price Book - Top Notch Distributors, Inc.
Ives Price Book - Top Notch Distributors, Inc.
Ives Price Book - Top Notch Distributors, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Terms and Conditionsinterpreted to limit Company’s or Customer’s right, if permitted by applicable law, to assert a claim forcontribution among joint tortfeasors in connection with a claim by a person who is not a party to thisAgreement.21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI standardsare tested and performed by third-party independent laboratories. Any field modification or alteration ofcertified Deliverables will void certification and Company is not liable to Customer to certify any modifiedor altered Deliverable.22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OFTHIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THANONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.23. CONSUMER PRODUCTSWITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSON-MOSS WARRANTY ACT (“MMWA”), THE FOLLOWING STATEMENTS ARE MADE.(A) SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIEDWARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU; (B) IFANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED TOTHE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C) SOMESTATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL ORCONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAYNOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU SPECIFIC LEGALRIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATETO STATE.24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform itsobligations hereunder will be excused to the extent that it is caused by an event or occurrence beyondCompany’s control such as, by way of example and not by way of limitation, acts of God, acts by anygovernmental authority (whether valid or invalid), governmental laws and regulations not presentlyin effect, fires, floods, windstorms, explosions, riots, natural disasters, wars, sabotage, accidents, laborproblems (including, without limitation, lockouts, strikes, and slowdowns) at Company's facility, itssource plant or their suppliers, inability to obtain power, material, labor equipment, or transportation, orcourt injunction or order. The delivery date will be extended for a time equal to that of the delay and theschedule for Company’s performance will be deemed adjusted to that effect.25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the attachments,exhibits, webpages, or supplements specifically referenced and incorporated herein, constitute the entireagreement between Company and Customer with respect to the matters contained herein and supersedeall previous communications, representations, or agreements, either oral or written between Companyand Customer. No agreement or understanding varying or expanding this Agreement will be bindingupon either party unless it is in writing and signed by a duly authorized representative of each partyhereto.26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any agreement, orany part of an agreement or the various documents (including, but not limited to, electronic documents)between Company and Customer, unless the parties agree otherwise in writing, the various componentsof the agreements shall be given the following precedence (in descending order of precedence): a) anymaster agreement or long term agreement between Company and Customer; b) any specific terms, conditionsand/or warranties of the individual products or Deliverables; c) the terms and conditions of thisAgreement, and d) any purchase order.27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT.Customer shall furnish Company with statements evidencing Customer’s financial condition asCompany may, from time to time, reasonably request, and shall notify Company immediately of anyand all events that may have a material adverse effect on Customer’s business or financial condition.If Company determines, in its sole discretion, that Customer’s financial condition or creditworthinessis inadequate or unsatisfactory, then in addition to Company’s other rights, Company may withoutliability or penalty, take any of the following actions: (i) modify the payment terms for any outstandingand/or future purchases; (ii) cancel any previously accepted orders; (iii) delay any further shipment ofDeliverables to Customer; or (iv) any combination of the above.Company may immediately terminate an order from Customer by giving written notice to Customerin the event of the happening of any of the following or any other comparable event: (i) insolvency ofthe Customer; (ii) filing of a petition in bankruptcy by or against the Customer; (iii) appointment of areceiver or trustee for the Customer; (iv) execution of an assignment for the benefit of creditors by theCustomer, all of which will allow Company to demand reclamation of all affected orders; (v) Customerceases or threatens to cease to trade; (vi) Company determines that Customer does not meet or no longermeets the credit requirements of Company or Customer’s credit account is closed; (vii) any Customerviolation of law, specifically including, without limitation, those laws set forth in this Agreement.In the event of termination in accordance with this section, Company will not be obligated to accept anyexisting or additional orders from Customer and Company will be released from its obligation to deliverunder orders accepted prior to such termination. The rejection or termination of any order by Companywill not entitle Customer to any termination or severance compensation, or to any payment in respect toany goodwill established by Customer, or render Company liable for damages on account of the loss ofprospective profits, or on account of any loss, expenditure, investment or obligation incurred or made byCustomer.No action taken under this Section 27 by Company (nor any failure of Company to act under thisSection 27) will constitute a waiver by Company of any of its rights to enforce Customer’s obligations,including the obligation of Customer to make payments as required under this Agreement. Upon terminationof any order, all amounts owed by Customer to Company will become immediately due andpayable, whether or not otherwise then due or payable.28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all creditrisks with respect to, and for collecting payment for, all Deliverables sold to third parties (includingEnd Users, installers, and/or general contractors) whether or not Customer has made full payment toCompany for such Deliverables. The inability of Customer to collect payment for any Deliverable shallnot affect Customer’s obligation to pay Company for any Deliverable.29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to thisAgreement shall be governed by and construed according to the laws of the State of Indiana (excludingits conflict of laws principles); and not by the provisions of the 1980 United Nations Convention on theInternational Sale of Goods. Any disputes or claims shall be instituted and maintained in the courts ofthe State of Indiana. Customer consents to the exercise of jurisdiction over it by such courts and agreesthat Indiana is not an inconvenient forum for any action arising from or relating to this Agreement.Customer agrees to pay for all expenses (including, but not limited to, collection costs, court costs andattorneys’ fees) incurred by Company in enforcing the obligations of Customer under this Agreement.30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document createsan employment, partnership, joint venture, or agency relationship between Company and Customer,including that of franchisee/franchisor. No party will have any power or authority to enter into any commitmenton behalf of or otherwise bind the any other party on any matter. No employee of Customerwill be deemed to be an employee of Company. If any provision of this Agreement is deemed to createa franchise relationship or business opportunity between the Parties, then Company may terminatethis Agreement or the Parties shall negotiate in good faith to modify this Agreement so as to effect theoriginal intent of the Parties as closely as possible in a mutually acceptable manner in order that thetransactions contemplated hereby are consummated as a reseller agreement and not a franchise or businessopportunity agreement.31. SETOFF. Customer does not have the right to setoff or to back charge against any amounts whichbecome payable to Company under this Agreement or otherwise. Company will not accept responsibilityfor backcharges for the cost of material or labor by Customer or any third party.32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both partiesexpressly agree to electronic transactions and acknowledge that documents they sign electronically willbind them to the same extent as a paper signature. Customer represents and warrants to Company thatonly employees authorized to bind Customer legally shall electronically sign any document under thisAgreement. Customer shall comply with any method of electronic communication/payment processingspecified by Company, including electronic funds transfer, pay-on-receipt processes/systems, ordertransmission, releases, electronic signature, and electronic communication systems, including, withoutlimitation, the use of electronic data interchange ("EDI") portals. Notwithstanding the foregoing, e-mails,even those containing a signature block of one of Company’s representatives, shall not constitute asigned writing.33. COMPLIANCE WITH APPLICABLE LAWS.a. General. Company and Customer will comply with all applicable federal, state and municipal laws,regulations, codes, ordinances and orders that pertain to the Deliverables, including but not limited tofull compliance with any applicable provisions of The Health Insurance Portability and AccountabilityAct. Where the Customer is located outside the United States, or where the customer intends to ship theproduct outside the United States, the Customer shall be responsible for compliance with all U.S. exportlaws, and for filing all U.S. Electronic Export Information, as applicable.b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws and regulationsin performing its duties under this Agreement; (ii) it does not and shall not engage in any conductthat shall violate any applicable anti-bribery or anti-corruption laws or regulations; (iii) it (and its owners,officers, directors, employees and agents) shall not pay, offer, promise or authorize the payment of,either directly or indirectly, anything of value (including but not limited to cash, gifts and entertainment)to (a) any government official or employee of any government; (b) any official or employee of anydepartment, agency, or instrumentality of a government; (c) any employee of any corporation or entityowned or controlled by a government; (d) any family member of such officials or employees; (e) anypolitical party, party official, or political candidate; or (f) any other persons, owners, officers, directors,employees and agents of any corporation or entity; to improperly or illegally assist in obtaining or retainingbusiness (including but not limited to any contracts, avoidance of duties or reduction of tariffs, reductionof taxes or to obtain money owed, or to obtain regulatory approval) or for the purpose of causing,soliciting or inducing the sale and purchase of the Deliverables by any party, and (iv) it has full knowledgeof and will comply with the Company’s Code of Conduct for Business Partners as set forth on theIngersoll Rand customer website, WHICH IS HEREBY INCORPORATED BY REFERENCE.c. The Customer shall indemnify and hold the Company harmless from any claim, demand, expenseor cost arising from any breach of this Article.d. The Customer shall permit the Company to conduct an audit or review of the Customer’s financialbooks and records and business operations at such other times that the Company considers it necessaryto confirm compliance with this provision. Such audit may be conducted by representatives of theCompany or, at the Company’s sole discretion, by a certified public accounting firm selected by theCompany. The Customer shall cooperate with any inquiries from the Company’s Ethics & ComplianceGroup.e. A violation of this provision constitutes a material breach of this Agreement and the Company mayterminate this Agreement immediately, with no opportunity to cure, in accordance with Section 27 ofthis Agreement.f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible forobtaining or maintaining any permits for the performance of services or the verification or compliancewith any code requirements relative to the performance of services, (ii) to the extent any sale ofDeliverables pursuant to this Agreement may require approval of the U.S. Government, Company’sobligations under this Agreement are conditioned upon the grant of such approval and upon complianceby Customer with any restrictions imposed by the U.S. Government in connection with such approval,and (iii) in the event the Deliverables are to be used in a nuclear facility, the Customer shall, prior tosuch use, arrange for insurance or governmental indemnity protecting Company against liability. TheCustomer hereby releases and agrees to indemnify Company and its suppliers for any nuclear damageincluding, but not limited to, loss of use, in any manner arising out of the nuclear incident, whetheralleged to be due, in whole or in part by Company or its suppliers.g. No Inducements. Each party represents to each other that neither it nor any person acting on itsbehalf has, in contravention of any applicable law, given or offered to give or will give or offer to give,any sum of money or other material consideration to any person, directly or indirectly, as an inducementto obtain business hereunder or to influence the granting of licenses or other governmental permissionsto enter into this Agreement or perform obligations hereunder.h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies withExecutive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1 through60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C. § 4212 andapplicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING PROVISIONS AREINCORPORATED HEREIN BY REFERENCE: Executive Order 11246 and 41 CFR § 60-4.3(a);Executive Order 11701 and 41 CFR §§ 60-250.5(a), 60-300.5; Executive Order 11758 and 41 CFR §60-741.5(a); U.S. immigration laws, including the L-1 Visa Reform Act of 2004 and the H-1B VisaReform Act of 2004; and Executive Order 13496.i. Ethical Business Conduct. Customer shall adopt and comply with Company’s Business PartnerCode of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE.34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and covenants toCompany that: (a) it has the right, power, and authority to enter into this Agreement and fully performits obligations hereunder; (b) it has all necessary rights in and to its respective Content and Marks foruse within the scope of this Agreement, including the licenses granted herein; and (c) it complies, and13-3/3iv<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
How to use this bookHINGESCONTINUOUSHINGESPIVOTSNumerical1-059Products are shown in four groups; Hinges, Continuous Hinges, Pivots and Architectural Hardware. Each group isorganized in numerical order and no longer in alpha/numerical. Particularly in the Architectural Hardware group, theproducts are organized by the part number regardless of the prefix or suffix. Example WS33X Wall Stop will be innumerical sequence of 33; CS115 Crash Stop numerical sequence 115.For convenience there are a few exceptions where an accessory follows the associated product; example, the COR72 Coordinatoris followed by MB1 Mounting Bracket.The service parts section of previous books has been changed. Service parts for many products have been listed with the product.A full list of available service parts may be obtained from the <strong>Ives</strong> website. You may also contact your local sales representative or<strong>Ives</strong> customer service for more assistance on the availability of service parts.Information contained in the list price table:Model: Column contains model family description and general catalog informationSubstrate: Column contains material substrate information (i.e. aluminum, brass, steel)Model Number: Column contains the model number and additional prefix for other distinguishing features or packaging type.Package type prefixes (C, CGC, SC, SP, SPS) descriptions are as follows:C – CardedCGC – Commercial Grade CardedSC – Schlage Branded CardSP – Slim PackSPS – Schlage Branded Slim PackItem Number : Item number field is UPC number or sku number, where available.Numerical59-437Numerical438-1021Weight : Contains the total weight of product in box quantity. Not all weights shown.Order Quantity : Contains the minimum order quantity for identified product, if required.Box Quantity : Number of items in master carton or special package type.Markings Cartons: Markings (e.g., door locations, stock reference numbers) on acknowledgements and individual product cartonswill be provided at $2.00 each net. Products available to mark: Hinges, Continuous Hinges, Pivots, Protection Plates, Coordinators,Flush Bolts.Numerical8200-9340Numerical1152-8190vi<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
Numerical IndexPart No. Page Part No. Page Part No. Page Part No. Page Part No. Pagehinges3PB1 ...........1,23CB1 ...........3,43CB1 HW ......... 53CB1 WT ........6,73SP1 ............ 75PB1 ...........8,95BB1 ..........9,105BB1 HW ........ 115BB1 SC ......... 125BB1 WT ......13,141010. . . . . . . . . 15, 521011. . . . . . . . . 15, 521012. . . . . . . . . 15, 521020. . . . . . . . . 15, 521021. . . . . . . . . 15, 52continuous hinges600. . . . . . . . . . . . . 16602. . . . . . . . . . . . . 16611. . . . . . . . . . . . . 16700. . . . . . . . . . . . . 16702. . . . . . . . . . . . . 16705. . . . . . . . . . . . . 16711. . . . . . . . . . . . . 16715. . . . . . . . . . . . . 16045HD .......... 18046HD .......... 18053HD .......... 18054HD .......... 18112HD .......... 18157X4. . . . . . . . . . . 18157HD .......... 19210HD .......... 19224HD .......... 19pivots7212. . . . . . . . . . . . 207212V ........... 207215. . . . . . . . . . . . 207215F ........... 207222. . . . . . . . . . . . 207226. . . . . . . . . . . . 207226F ........... 207227. . . . . . . . . . . . 207227F ........... 207230F ........... 207237F ........... 207244F ........... 207245F ........... 217253. . . . . . . . . . . . 217255. . . . . . . . . . . . 217255J ........... 217256. . . . . . . . . . . . 217259. . . . . . . . . . . . 219110F ........... 21architectural hardware.CB1 ............ 23DP1 ............ 23LG1 ............ 23MB1 ........... 28DP2 ............ 23MB2 ............ 28MB2F ........... 28MB2V ........... 282. . . . . . . . . . . . . . . 23MB3F ........... 28MB3V ........... 28LG7 ............ 23COR7G .......... 2307, ............. 24COR9G .......... 24FS9 ............. 24LG10 ........... 24CL11. . . . . . . . . . . . 24LG11 ........... 24WS11 .......... 24WS11X .......... 25CL12. . . . . . . . . . . . 25LG12 ........... 25FS13 ............ 25LG13 ........... 25CL14. . . . . . . . . . . . 25LG14 ........... 25FS17 ............ 25R14 ............ 25AS18 ........... 25FS18 ........... 25FL20 ............ 28WS20 ........... 25WS20X .......... 26CL21. . . . . . . . . . . . 26CL21A .......... 2622. . . . . . . . . . . . . . 26CL22. . . . . . . . . . . . 2625. . . . . . . . . . . . . . 26026, ..........26-27RL30. . . . . . . . . . . . 27RL30A .......... 27FB31. . . . . . . . . . . . 27COR32 .......... 27FB32. . . . . . . . . . . . 29FL32 ............ 28RL32. . . . . . . . . . . . 29RL32A .......... 29FB33. . . . . . . . . . . . 29WS33 .......... 29WS33X .......... 29RL36. . . . . . . . . . . . 29RL36A .......... 29RL38. . . . . . . . . . . . 2940. . . . . . . . . . . .29-30FS40 ............ 30WS40 ........... 30FB41. . . . . . . . . . . . 30FS41 ............ 3042. . . . . . . . . . . . . . 30COR42 .......... 27FB42. . . . . . . . . . . . 31FS42 ............ 31FS43 ............ 31FL44 ............ 28WS45 .......... 31WS45X .......... 31S48 ............ 31FB51. . . . . . . . . . . . 31COR52 .......... 28FB52. . . . . . . . . . . . 32FB53. . . . . . . . . . . . 32054. . . . . . . . . . . . . 32059. . . . . . . . . . . . . 3259. . . . . . . . . . . . . . 3360. . . . . . . . . . . . . . 33060, ............ 33COR60 .......... 28061. . . . . . . . . . . . . 3461. . . . . . . . . . . .34-35FB61. . . . . . . . . . . . 35FB62. . . . . . . . . . . . 3563. . . . . . . . . . . . . . 3564. . . . . . . . . . . . . . 35SR64 ........... 35SR65 ........... 35WS65 ........... 35066. . . . . . . . . . . . . 3666. . . . . . . . . . . . . . 36SR66 ........... 3569. . . . . . . . . . . . . . 3670. . . . . . . . . . . .36-3771. . . . . . . . . . . . . . 3772. . . . . . . . . . . . . . 37COR72 .......... 2873. . . . . . . . . . . . . . 3790. . . . . . . . . . . . . . 37CS115 .......... 37HB159 .......... 37218. . . . . . . . . . . . . 38221. . . . . . . . . . . . . 38222. . . . . . . . . . . . . 38223. . . . . . . . . . . . . 38227. . . . . . . . . . . . . 38230. . . . . . . . . . . . . 38253. . . . . . . . . . . . . 39261. . . . . . . . . . . . . 39262. . . . . . . . . . . . . 39265. . . . . . . . . . . . . 39325. . . . . . . . . . . . . 39326. . . . . . . . . . . . . 39327. . . . . . . . . . . . . 39330. . . . . . . . . . . . . 39335. . . . . . . . . . . . . 39336. . . . . . . . . . . . . 39345. . . . . . . . . . . . . 40347. . . . . . . . . . . . . 40349. . . . . . . . . . . . . 40FB358. . . . . . . . . . . 40SB360 .......... 40WS401-CVX ...... 40WS401-CCV ...... 40WS402-CVX ...... 40WS402-CCV ...... 41WS404 .......... 41405. . . . . . . . . . . . . 41WS406-CVX ...... 41WS406-CCV ...... 41WS407-CVX ...... 41WS407-CCV ...... 42FS410 ........... 42411. . . . . . . . . . . . . 42430. . . . . . . . . . . . . 42FS434 ........... 42R435 ........... 42FS436 ........... 42R437 ........... 42FS438 ........... 43FS439 .......... 43FS441 .......... 43WS443 .......... 43FS444 ........... 43WS445 .......... 43FS446 ........... 43WS447 .......... 44FS448 ........... 44WS449 .......... 44FS450 ........... 44FS452 ........... 44SB453 ........44-45FS455 ........... 45FB457. . . . . . . . . . . 45FB458. . . . . . . . . . . 45RB470 .......... 45RB471 .......... 45RB472 .......... 45481. . . . . . . . . . . . . 46482. . . . . . . . . . . . . 46FS495 .......... 46FS496 ........... 46FS497 ........... 46FS544 ........... 46FS555 ........... 46571. . . . . . . . . . . . . 47572. . . . . . . . . . . . . 47574. . . . . . . . . . . . . 48575. . . . . . . . . . . . . 48580. . . . . . . . . . . . . 48581. . . . . . . . . . .48-49582. . . . . . . . . . . . . 49585. . . . . . . . . . . . . 49586. . . . . . . . . . . . . 49601. . . . . . . . . . . . . 49620. . . . . . . . . . . . . 50STK685 ......... 50STK685L ......... 50U696 ........... 50698. . . . . . . . . . . . . 50700. . . . . . . . . . . . . 50701. . . . . . . . . . . . . 50VR810DT ........ 50VR814DT ........ 50VR810NL ........ 50VR814NL ........ 50VR810NL-V ....... 50VR814NL-V ....... 50AS895 .......... 50VR900 .......... 51VR904 .......... 51VR900LLP ........ 51VR904LLP ........ 51VR910DT ........ 51VR914DT ........ 51VR910NL ........ 51VR914NL ........ 51VR910M-DT ...... 51VR914M-DT ...... 51VR910M-NL ...... 51VR914M-NL ...... 51980. . . . . . . . . . . . . 51990. . . . . . . . . . . . . 51991. . . . . . . . . . . . . 521010. . . . . . . . . 15, 521011. . . . . . . . . 15, 521012. . . . . . . . . 15, 521020. . . . . . . . . 15, 521021. . . . . . . . . 15, 52RL1152. . . . . . . . . . 53FS1153 .......... 53FS1154 .......... 53SB1600M1 ....... 53SB1600M2 ....... 53SB1630 ......... 54SB1640 ......... 5430X6. . . . . . . . . . . . 553107. . . . . . . . . . . . 5631251. . . . . . . . . . . 5631252. . . . . . . . . . . 568102. . . . . . . . . . . . 608103. . . . . . . . . .60-618103EZ .......... 618105. . . . . . . . . . . . 618111. . . . . . . . . . . . 628112. . . . . . . . . . . . 628121. . . . . . . . . . . . 628190. . . . . . . . . . . . 628200. . . . . . . . . . . . 638302. . . . . . . . . .64-658303. . . . . . . . . .66-678305. . . . . . . . . .67-688311. . . . . . . . . . . . 698400. . . . . . . . . .70-719100. . . . . . . . . . . . 729103EZ ........72-739190. . . . . . . . . .73-749264. . . . . . . . . . . . 759264F ........... 759265. . . . . . . . . . . . 759265F ........... 759266. . . . . . . . . . . . 759266F ........... 759267. . . . . . . . . . . . 759267F ........... 75hobby hardware78. . . . . . . . . . . . . . 7686. . . . . . . . . . . . . . 769011. . . . . . . . . . . . 769031. . . . . . . . . . . . 769041. . . . . . . . . . . . 769042. . . . . . . . . . . . 769051. . . . . . . . . . . . 769070. . . . . . . . . . . . 769071. . . . . . . . . . . . 769072. . . . . . . . . . . . 769110. . . . . . . . . . . . 769120. . . . . . . . . . . . 769130. . . . . . . . . . . . 769210. . . . . . . . . . . . 769220. . . . . . . . . . . . 769311. . . . . . . . . . . . 769320. . . . . . . . . . . . 769321. . . . . . . . . . . . 769330. . . . . . . . . . . . 769340. . . . . . . . . . . . 76HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13vii
Key to FinishesIVES FINISH ANSI/BHMA US Number Finish Description Base MaterialHINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340A3 666 US3 Bright Brass, Clear Coat AluminumA5 US5 Satin Brass, Blackened, Satin Relieved AluminumA10 668 US10 Satin Bronze, Clear Coat AluminumA10B 703 US10B Dark Bronze, Oil Rubbed AluminumA14 669 US14 Bright Nickel, Clear Coat AluminumA15 670 US15 Satin Nickel, clear Coat AluminumA19 671 US19 Flat Black Coated AluminumA26 672 US26 Bright Chrome AluminumA26D 702 US26D Satin Chrome AluminumA716 Aged Bronze AluminumA92 673 Aluminum Clear Coat AluminumA-Almond Almond AluminumA-BLK Black AluminumA-W White AluminumPA28 628 US28 Satin Aluminum, Clear Anodized AluminumB3 605 US3 Bright Brass, Clear Coat Brass/BronzeB4 606 US4 Satin Brass, Clear Coat Brass/BronzeB5 609 US5 Satin Brass, Blackened, Satin Relieved Brass/BronzeB9 611 US9 Bright Bronze, Clear coat Brass/BronzeB10 612 US10 Satin Bronze, Clear Coat Brass/BronzeB10B 613 US10B Dark Bronze, Oil Rubbed Brass/Bronze614 US10A Satin Bronze, Relieved, Clear Coated Brass/Bronze616 US11 Satin Bronze, Blackened, Clear Coated Brass/BronzeB14 618 US14 Bright Nickel, Clear CoatB15 619 US15 Satin Nickel, Clear Coat Brass/BronzeB15A 620 US15A Satin Nickel, Blackened, Satin Relieved Brass/BronzeB26 625 US26 Bright Chrome Brass/BronzeB26D 626 US26D Satin Chrome Brass/BronzeB716 Aged Bronze Brass/BronzeF2C 604 US2C Zink Plated SteelF3 632 US3 Bright Brass, Clear Coat SteelF4 633 US4 Satin Brass, Clear Coat SteelF5 638 US5 Satin Brass, Blackened, Satin Relieved SteelF10 639 US10 Satin Bronze, Clear Coat SteelF10B 640 US10B Dark Bronze, Oil Rubbed Steel641 US10A Oxidized Satin Bronze, Relieved, Clear Coated Steel643 US11 Satin Bronze, Blackened, Relieved, Clear Coated SteelF14 645 US14 Bright Nickel, Clear Coat SteelF15 646 US15 Satin Nickel, Clear Coated SteelF26 651 US26 Bright Chrome SteelF26D 652 US26D Satin Chrome Steel664 US27 Satin Aluminum, Clear Anodized Aluminum AluminumF716 Aged Bronze SteelF-W White SteelSP4 Dull Brass Painted AllSP10 691 Dull Bronze Painted AllSP28 689 Aluminum Painted AllSP313 695 Dark Bronze Painted AllSPBLK 622 Flat Black AllUSP 600 USP Primed For Paint AllUS32 629 US32 Bright Stainless Steel Stainless SteelUS32D 630 US32D Satin Stainless Steel Stainless SteelUS32D 654 Satin Stainless Steel Stainless Steelviii<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
Key to FinishesIVES FINISH ANSI/BHMA US Number Finish Description Base MaterialZ605 US26 Bright Chrome ZincZ609 US5 Satin Brass, Blackened, Satin Relieved ZincZ613 US10B Dark Bronze, Oil Rubbed ZincZ619 US15 Bright Brass, Clear Coated ZincZ625 US26 Bright Chrome ZincZ716 Aged Bronze ZincZ-W White ZincBLK Black Rubber or PlasticWHT White Rubber or PlasticGRY Grey RubberTAN Tan RubberBRN Brown RubberHINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13ix
NotesNumerical8200-9340Numerical1152-8190Numerical438-1021Numerical59-437Numerical1-059PIVOTSCONTINUOUSHINGESHINGESx<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
STEEL BASEDBRASS / STAINLESS BASEDDESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES3PB13.5”x3.5”(89x89mm)600632$9.3013.70----605USPUS3332424Three KnucklePlain BearingStandard Weight6336396406416436466519.9010.4013.7013.7014.5014.5013.70606612613614616619625US4US10US10BUS10AUS11US15US26333333324242424242424For use on standard652 11.50 626US26D 3 24weight doors with mediumfrequency usage-------- 629US32 3 24Available in:-------- 630US32D 3 24Steel w/Steel Pin4”x4” 600 10.30 ----USP 3 24Brass w/Brass PinStainless w/Stainless Pin (102x102mm) 632 15.30 605US3 3 24Non-removable Pin633 10.80 606US4 3 24(Steel Based 4.5 x 4.5 Hinges639 11.50 612US10 3 24add $2.10all others add $5.20 list)640 15.30 613US10B 3 24Packed with:Wood and machine screws64164315.3016.00614616US10AUS11332424Available options:646 16.00 619US15 3 24SEC - Security ScrewsHT - Hospital tip651 15.30 625US26 3 24RC - Round cornersSH - Security StudsSee page 14 for pricing652--------12.80--------626629630US26DUS32US32D3332424244.5”x4”(114x102mm)4.5”x4.5”(114x114mm)600632633639640641643646651652--------600632633639640641643646651652--------5.6011.005.606.8010.0010.6011.0011.0011.008.90--------5.6011.005.606.8011.0011.0011.0011.0011.006.80------------605606612613614616619625626629630----605606612613614616619625626629630USPUS3US4US10US10BUS10AUS11US15US26US26DUS32US32DUSPUS3US4US10US10BUS10AUS11US15US26US26DUS32US32D333333333333333333333333242424242424242424242424242424242424242424242424----$47.8039.8037.1047.8047.8047.8047.8050.5045.1054.7052.5053.8044.8041.9053.9053.9053.9053.9056.8050.9061.6059.2031.1026.0024.1031.1031.1031.1031.1032.8029.3035.5034.5031.1026.0024.1031.1031.1031.1031.1032.8029.3035.5034.50HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Note: Specify BHMA finish code when ordering.Shaded items may require extended lead time.Numerical8200-9340Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/131
HINGESCONTINUOUSHINGESSTEEL BASEDBRASS / STAINLESS BASEDDESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES3PB1Three KnucklePlain BearingStandard Weight5”x4.5”(127x114mm)600632633639640641643646$ 26.6039.7028.2029.8039.7039.7041.3041.30----605606612613614616619$ ----72.8060.6056.5072.8072.8072.8072.80USPUS3US4US10US10BUS10AUS11US15333333332424242424242424651 39.70 625 76.70 US26 3 24For use on standardweight doors with medium652 33.10 626 68.70 US26D 3 24frequency usage----------------62963083.2080.00US32US32D332424Note: Specify BHMA finish code when ordering.Shaded items may require extended lead time.Numerical8200-9340Numerical1152-8190Numerical438-1021Numerical59-437Numerical1-059PIVOTSContact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track2<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
STEEL BASEDBRASS / STAINLESS BASEDDESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES3CB13.5”x3.5”(89x89mm)600632$ 21.9033.10----605$ ----47.80USPUS333242463363964064164323.4024.8033.1033.1034.5060661261361461639.8037.1047.8047.8047.80US4US10US10BUS10AUS11333332424242424Full Mortise64634.50 619US15Three Knuckle47.803 24Concealed Bearing65133.10 62550.50 US26 3 24Standard Weight65227.60 62645.10 US26D 3 24For use on standardweight doors with mediumfrequency usage----------------62963054.7052.50US32US32D332424Available in:4”x4” 60023.60 -------- USP 3 24Steel w/Steel PinBrass w/Brass Pin (102x102mm) 63235.50 60553.90 US3 3 24Stainless w/Stainless Pin63325.10 60644.80 US4 3 24Non-removable Pin63926.70 61241.90 US10 3 24(Steel Based 4.5 x 4.5 Hingesadd $2.1064035.50 61353.90 US10B 3 24all others add $5.20 list)64135.50 61453.90 US10A 3 2464337.00 61653.90 US11 3 24Packed with:Wood and machine screws64637.00 61953.90 US15 3 24Available options:65135.50 62556.80 US26 3 24SEC - Security Screws65229.60 626US26DHT - Hospital tip50.903 24RC - Round corners-------- 62961.60 US32 3 24SH - Security StudsTW - Electric Thru Wire-------- 63059.20 US32D 3 24See page 14 for pricing4.5”x4”(114x102mm)60063213.3018.70----605----47.40USPUS3332424633639640641643646651652--------13.3014.5013.3013.3018.7020.8018.7016.70--------60661261361461661962562662963039.4036.9047.4047.4047.4047.4050.1044.7054.3051.10US4US10US10BUS10AUS11US15US26US26DUS32US32D3333333333242424242424242424244.5”x4.5”(114x114mm)600632633639640641643646651652--------8.9018.7013.3014.5018.7018.7018.7018.7018.7011.00------------605606612613614616619625626629630----52.6039.4036.9052.6047.4047.4039.2050.1044.7054.3052.20USPUS3US4US10US10BUS10AUS11US15US26US26DUS32US32D333333333333242424242424242424242424NRP also in Fast TrackNRP also in Fast TrackNote: Specify BHMA finish code when ordering.Shaded items may require extended lead time.HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/133
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059STEEL BASEDBRASS / STAINLESS BASEDDESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES3CB15”x4.5”(127x114mm)600632$ 19.9029.80---605$ ----58.90USPUS3332424Full MortiseThree Knuckle63363964064164364621.0022.4029.8029.8031.0031.0060661261361461661949.2045.9058.9058.9058.9058.90US4US10US10BUS10AUS11US15333333242424242424Concealed Bearing651 29.80 62562.30 US26 3 24Standard Weight652 24.80 62655.70 US26D 3 24For use on standardweight doors with medium-------- 62967.60 US32 3 24frequency usage-------- 63064.00 US32D 3 24Available in:5”x5” 600 35.60 -------- USP 3 24Steel w/Steel PinBrass w/Brass Pin (127x127mm) 632 53.40 60558.90 US3 3 24Stainless w/Stainless Pin633 37.90 60649.20 US4 3 24Non-removable Pin639 40.10 61245.90 US10 3 24(Steel Based 4.5 x 4.5 Hingesadd $2.10640 53.40 61358.90 US10B 3 24all others add $5.20 list)641 53.40 61458.90 US10A 3 24Packed with:Wood and machine screws643 55.70 61658.90 US11 3 24646 55.70 61958.90 US15 3 24Available options:SEC - Security Screws651 53.40 62562.30 US26 3 24HT - Hospital tipRC - Round corners652 44.50 62655.70 US26D 3 24SH - Security Studs-------- 62967.60 US32 3 24TW - Electric Thru WireSee page 14 for pricing-------- 63065.00 US32D 3 24Note: Specify BHMA finish code when ordering.Shaded items may require extended lead time.Numerical8200-9340Numerical1152-8190Numerical438-1021Numerical59-437Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track4<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
STEEL BASEDBRASS / STAINLESS BASEDDESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES4.5”x4” 600 $ 34.50 ---- $ ---- USP 3 243CB1 HW(114x102mm) 63244.40 60587.40 US3 3 2463363964064164334.5036.7045.2045.2044.4060661261361461660.6056.4072.5072.5072.50US4US10US10BUS10AUS1133333242424242464647.20 61956.00 US15 3 24Full MortiseThree Knuckle65144.40 62576.60 US26 3 24Concealed BearingHeavy WeightFor use on heavy652----37.70----62662968.6083.10US26DUS32332424weight doors with medium-------- 63079.90 US32D 3 24frequency usage4.5”x4.5” 60034.50 -------- USP 3 24Available in:Steel w/Steel Pin(114x114mm) 63244.40 60587.40 US3 3 24Brass w/Brass Pin63334.50 60660.60 US4 3 24Stainless w/Stainless Pin63936.70 61256.40 US10 3 24Non-removable Pin(Steel Based 4.5 x 4.5 Hingesadd $2.10all others add $5.20 list)64064145.2045.2061361472.5072.50US10BUS10A33242464344.40 61672.50 US11 3 24Packed with:Wood and machine screws64644.40 61956.00 US15 3 24Available options:65144.40 62576.60 US26 3 24SEC - Security Screws65237.70 62668.60 US26D 3 24 NRP also in Fast TrackHT - Hospital tipRC - Round corners-------- 62983.10 US32 3 24SH - Security StudsTW - Electric Thru Wire-------- 63079.90 US32D 3 24 NRP also in Fast TrackSee page 14 for pricing 5”x4.5”(127x114mm)5”x5”(127x127mm)600632633639640641643646651652--------600632633639640641643646651652--------40.0052.2040.0042.2052.2052.2052.2054.1052.2043.30--------40.0052.2040.0042.2052.2052.2052.2054.1052.2043.30------------605606612613614616619625626629630----605606612613614616619625626629630----98.7068.9064.3082.7082.7082.7066.2087.3078.3094.7091.10----98.7068.9064.3082.7082.7082.7066.2087.3078.3094.7091.10USPUS3US4US10US10BUS10AUS11US15US26US26DUS32US32DUSPUS3US4US10US10BUS10AUS11US15US26US26DUS32US32D333333333333333333333333242424242424242424242424242424242424242424242424Note: Specify BHMA finish code when ordering.Shaded items may require extended lead time.HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/135
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340STEEL BASEDBRASS / STAINLESS BASEDDESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES3CB1 WT4.5”x5”(127x114mm)600632633639640641$ 107.50161.30114.20120.90161.30161.30----605606612613614$ ------------------------USPUS3US4US10US10BUS10A333333242424242424Three Knuckle643 168.00 616 ---- US11 3 24Concealed BearingWide Throw646 168.00 619 ---- US15 3 24Standard Weight651 161.30 625 ---- US26 3 24For use on standard652 134.30 626 ---- US26D 3 24weight doors with mediumfrequency usage-------- 629 ---- US32 3 24Available in:Steel w/Steel Pin 4.5”x6”----600----113.60630------------US32DUSP332424Non-removable Pin (114x152mm) 632 170.50 605 ---- US3 3 24(add $5.20 List)633 120.70 606 ---- US4 3 24Packed with:639 127.90 612 ---- US10 3 24Wood and machine screws640 170.50 613 ---- US10B 3 24Available options:SEC - Security Screws641 170.50 614 ---- US10A 3 24HT - Hospital tipRC - Round corners643 177.70 616 ---- US11 3 24SH - Security Studs646 177.70 619 ---- US15 3 24TW - Electric Thru WireSee page 14 for pricing651 170.50 625 ---- US26 3 245”x6”(127x152mm)5”x7”(127x178mm)652--------600632633639640641643646651652--------600632633639640641643646651652--------142.00--------119.90179.70127.40134.70179.70179.70187.30187.30179.70149.70--------122.90184.30130.60138.20184.30184.30191.90191.90184.30153.70--------626629630----605606612613614616619625626629630----605606612613614616619625626629630------------------------------------------------------------------------------------------------------------US26DUS32US32DUSPUS3US4US10US10BUS10AUS11US15US26US26DUS32US32DUSPUS3US4US10US10BUS10AUS11US15US26US26DUS32US32D333333333333333333333333333242424242424242424242424242424242424242424242424242424Note: Specify BHMA finish code when ordering.Shaded items may require extended lead time.Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track6<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
STEEL BASEDBRASS / STAINLESS BASEDDESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES3CB1 WT5”x8”(127x204mm)600632633639640$ 131.90198.20140.40148.60198.20----605606612613$ --------------------USPUS3US4US10US10B333332424242424641 198.20 614 ---- US10A 3 24Three KnuckleConcealed Bearing643 206.40 616 ---- US11 3 24Wide ThrowStandard Weight646 206.40 619 ---- US15 3 24651 198.20 625 ---- US26 3 24For use on standardweight doors with medium652 165.20 626 ---- US26D 3 24frequency usage-------- 629 ---- US32 3 24-------- 630 ---- US32D 3 24STEEL BASEDSTAINLESS BASEDDESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES600 $ 15.20 ---- $ ---- USP 3 244”x4”632 21.70 605 ---- US3 3 243SP1(102x102mm)633 17.50 606 ---- US4 3 24639 19.70 612 ---- US10 3 24640 25.00 613 ---- US10B 3 24641 23.90 614 ---- US10A 3 24643 21.70 616 ---- US11 3 24646 21.70 619 ---- US15 3 24Spring HingeStandard Weight65165221.7020.60625626--------US26US26D332424UL listed-------- 629 ---- US32 3 24for use onfire-rated doors-------- 630 ---- US32D 3 24Available in:600 15.20 ---- ---- USP 3 24Steel w/ Steel Pin 4.5”x4”21.70Stainless w/ Stainless Pin632605 ---- US3 3 24(114x102mm)633 17.50 606 ---- US4 3 24Packed with:Wood and machine screws639 19.70 612 ---- US10 3 24Available options:640 25.00 613 ---- US10B 3 24SEC - Security Screws641 23.90 614 ---- US10A 3 24RC - Round cornersSee page 14 for pricing643 21.70 616 ---- US11 3 24646 21.70 619 ---- US15 3 24651 21.70 625 ---- US26 3 24652 20.60 626 ---- US26D 3 24-------- 629 ---- US32 3 24-------- 630 ---- US32D 3 24600 15.20 ---- ---- USP 3 244.5”x4.5”632 21.70 605 ---- US3 3 24(114x114mm)633 17.50 606 ---- US4 3 24639 19.70 612 ---- US10 3 24640 25.00 613 ---- US10B 3 24641 23.90 614 ---- US10A 3 24643 21.70 616 ---- US11 3 24646 21.70 619 ---- US15 3 24651 21.70 625 ---- US26 3 24652 20.60 626 ---- US26D 3 24-------- 629 60.50 US32 3 24-------- 630 57.70 US32D 3 24Note: Specify BHMA finish code when ordering.Shaded items may require extended lead time.HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/137
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190STEEL BASEDBRASS / STAINLESS BASEDDESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES5PB13.5”x3.5”(89x89mm)600632$ 5.507.80----605$ ----20.60USPUS3332424Five KnucklePlain BearingStandard WeightFor use onstandard weightdoors with lowfrequency usage633639640641643646651652--------5.808.108.108.108.408.408.106.80--------60661261361461661962562662963017.1016.1020.6020.6020.6020.6021.7019.4023.4022.50US4US10US10BUS10AUS11US15US26US26DUS32US32D333333333324242424242424242424Available in:4”x4” 6006.20 -------- USP 3 24Steel w/Steel PinBrass w/Brass Pin (102x102mm) 6329.40 60523.50 US3 3 24Stainless w/Stainless Pin6336.50 60619.50 US4 3 24Non-removable Pin6397.00 61218.30 US10 3 24(Steel based 4.5 x 4.5 hingesadd $2.10 List6409.40 61323.50 US10B 3 24All other add $5.20 List)6419.40 61423.50 US10A 3 24Packed with:6439.80 61623.50 US11 3 24Wood and machine screws6469.80 61923.50 US15 3 24Available options:SEC - Security Screws6519.40 62524.70 US26 3 24HT - Hospital tipRC - Round corners6527.70 62622.10 US26D 3 24SH - Security Studs-------- 62926.60 US32 3 24See page 14 for pricing-------- 63025.80 US32D 3 244.5”x4”(114x102mm)4.5”x4.5”(114x114mm)600632633639640641643646651652--------600632633639640641643646651652--------6.8011.105.706.8010.8010.8011.1011.1011.109.00--------4.4011.105.706.8010.1010.1011.1011.1011.106.80------------605606612613614616619625626629630----605606612613614616619625626629630----32.0027.4027.4032.0029.9029.9032.0036.7028.2033.9032.50----32.0027.4027.4032.0029.9029.9032.0036.7028.2033.9032.50USPUS3US4US10US10BUS10AUS11US15US26US26DUS32US32DUSPUS3US4US10US10BUS10AUS11US15US26US26DUS32US32D333333333333333333333333242424242424242424242424242424242424242424242424NRP also in Fast TrackNRP also in Fast TrackNote: Specify BHMA finish code when ordering.Numerical8200-9340Shaded items may require extended lead time.Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track8<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
STEEL BASED BRASS / STAINLESS BASEDDESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES5PB15”x4.5” 600 $ 10.10 ---- $ ---- USP 3 24(127x114mm) 63263363964064164315.1010.7011.2015.1015.1015.9060560661261361461646.2038.6035.9046.2046.2046.20US3US4US10US10BUS10AUS11333333242424242424Five KnucklePlain BearingStandard WeightFor use onstandard weightdoors with lowfrequency usage5BB13.5”x3.5”(89x89mm)646651652--------60063215.9015.1012.70--------8.0012.20619625626629630----60546.2048.9043.7052.5050.60----29.40US15US26US26DUS32US32DUSPUS3333333324242424242424Five KnuckleBall BearingStandard WeightFor use onstandard weightdoors with mediumfrequency usage633639640641643646651652--------8.709.1012.2012.2012.7012.7012.2010.10--------60661261361461661962562662963024.5022.9029.4029.4029.4029.4031.1027.7033.4032.00US4US10US10BUS10AUS11US15US26US26DUS32US32D333333333324242424242424242424Available in:4”x4” 600 8.00 ---- ---- USP 3 24Steel w/Steel PinBrass w/Brass Pin (102x102mm) 632 12.20 605 28.60 US3 3 24Stainless w/Stainless Pin633 8.70 606 23.70 US4 3 24Non-removable Pin639 9.10 612 22.20 US10 3 24(Steel based 4.5 x 4.5 hingesadd $2.10 List640 12.20 613 28.60 US10B 3 24All other add $5.20 List)641 12.20 614 28.60 US10A 3 24Packed with:643 12.70 616 28.60 US11 3 24Wood and machine screws646 12.70 619 28.60 US15 3 24Available options:SEC - Security Screws651 12.20 625 30.20 US26 3 24HT - Hospital tipRC - Round corners652 10.10 626 27.00 US26D 3 24SH - Security Studs-------- 629 32.40 US32 3 24TW - Electric Thru WireSee page 14 for pricing-------- 630 31.10 US32D 3 244.5”x4”(114x102mm)600632633639640641643646651652--------11.1015.8011.1012.5016.1016.1015.8016.8015.8013.50------------605606612613614616619625626629630----37.8028.6028.6037.8034.0034.0037.8037.8032.1038.5037.10USPUS3US4US10US10BUS10AUS11US15US26US26DUS32US32D333333333333242424242424242424242424HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Note: Specify BHMA finish code when ordering.Shaded items may require extended lead time.Numerical8200-9340Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/139
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021STEEL BASED BRASS / STAINLESS BASEDDESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES5BB14.5”x4.5”(114x114mm)600632$ 9.0015.80----605$ ----37.80USPUS3332424NRP also in Fast TrackFive KnuckleBall BearingStandard Weight63363964064164364665110.1012.5015.8015.8015.8019.1015.8060661261361461661962528.6028.6037.8034.0034.0037.8037.80US4US10US10BUS10AUS11US15US26333333324242424242424For use on65210.10 62632.10 US26D 3 24 NRP also in Fast Trackstandard weightdoors with medium-------- 62938.50 US32 3 24frequency usage-------- 63037.10 US32D 3 24Available in:5”x4.5” 60017.00 -------- USP 3 24Steel w/Steel PinBrass w/Brass Pin (127x114mm) 63225.60 60543.30 US3 3 24Stainless w/Stainless Pin63318.10 60635.90 US4 3 24Non-removable Pin63919.20 61233.50 US10 3 24(Steel based 4.5 x 4.5 hingesadd $2.10 List64025.60 61343.30 US10B 3 24All other add $5.20 List)64125.60 61443.30 US10A 3 24Packed with:Wood and machine screws64326.60 61643.30 US11 3 2464626.60 61943.30 US15 3 24Available options:SEC - Security Screws65125.60 62545.60 US26 3 24HT - Hospital tipRC - Round corners65221.20 62640.80 US26D 3 24SH - Security Studs-------- 62949.00 US32 3 24TW - Electric Thru WireSee page 14 for pricing-------- 63047.20 US32D 3 245”x5”(127x127mm)600632633639640641643646651652--------17.3026.0018.3019.4026.0026.0026.9026.9026.0021.50------------605606612613614616619625626629630----44.8037.3034.8044.8044.8044.8044.8047.2042.2050.7048.60USPUS3US4US10US10BUS10AUS11US15US26US26DUS32US32D333333333333242424242424242424242424Note: Specify BHMA finish code when ordering.Shaded items may require extended lead time.Numerical8200-9340Numerical1152-8190Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track10<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
STEEL BASEDBRASS / STAINLESS BASEDDESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES5BB1HW4.5”x4” 600 $ 19.70 ---- $ ---- USP 3 24(114x102mm) 632 29.70 605 55.90 US3 3 24Five Knuckle63363964064164321.0022.2029.7029.7030.9060661261361461646.5043.5055.9055.9055.90US4US10US10BUS10AUS11333332424242424Ball Bearing646 30.90 619 55.90 US15 3 24Heavy Weight651 29.70 625 59.00 US26 3 24For use onheavy weight doors652 24.60 626 52.80 US26D 3 24doors with medium-------- 629 63.30 US32 3 24frequency usage-------- 630 60.60 US32D 3 24Available in:Steel w/Steel Pin 4.5”x4.5” 600 26.90 -------- USP 3 24Brass w/Brass PinStainless w/Stainless Pin(114x114mm) 632 34.80 605 55.90 US3 3 24633 28.10 606 46.50 US4 3 24Non-removable Pin(Steel based 4.5 x 4.5 hinges639 29.30 612 43.50 US10 3 24add $2.10 ListAll other add $5.20 List)640 34.80 613 62.90 US10B 3 24641 34.80 614 55.90 US10A 3 24Packed with:Wood and machine screws643 34.80 616 55.90 US11 3 24Available options:SEC - Security ScrewsHT - Hospital tip64665134.8034.8061962554.9059.00US15US26332424RC - Round corners652 29.30 626 52.80 US26D 3 24 NRP also in Fast TrackSH - Security StudsTW - Electric Thru Wire-------- 629 63.30 US32 3 24See page 14 for pricing-------- 630 60.60 US32D 3 24 NRP also in Fast Track5”x4.5”(127x114mm )60063263363964064164364665131.4044.9032.5033.7040.5040.5032.5032.5032.50----605606612613614616619625----65.0054.2050.6065.0065.0065.0065.0068.60USPUS3US4US10US10BUS10AUS11US15US26333333333242424242424242424652--------33.70--------62662963061.5073.7070.80US26DUS32US32D333242424NRP also in Fast Track5”x5”(127x127mm)600632633639640641643646651652--------32.4048.4034.4036.5048.4048.4050.7050.7048.4041.50------------605606612613614616619625626629630----75.4062.7058.6075.4075.4075.4075.4079.4071.1085.3082.00USPUS3US4US10US10BUS10AUS11US15US26US26DUS32US32D333333333333242424242424242424242424Note: Specify BHMA finish code when ordering.Shaded items may require extended lead time.HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1311
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340STEEL BASEDBRASS / STAINLESS BASEDDESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES5BB1 WT5”x8” 600 $ 48.40 ---- $ ---- USP 3 24(127x206mm) 63272.60 605---- US3 3 24Five KnuckleBall BearingWide ThrowStandard WeightFor use onstandard weightdoors with mediumfrequency usage633639640641643646651652--------51.4054.6072.6072.6075.7075.7072.6060.60--------606612613614616619625626629630----------------------------------------US4US10US10BUS10AUS11US15US26US26DUS32US32D333333333324242424242424242424Note: Specify BHMA finish code when ordering.Shaded items may require extended lead time.BAA 5BB1Five KnuckleBall BearingStandard WeightBuild in America (BAA)Non-removable Pin (NRP)add $2.10 ListBAA 5BB1 HWFive KnuckleBall BearingHeavy WeightBuild in America (BAA)Non-removable Pin (NRP)add $2.10 ListBAA 5BB1 HW BSCFive KnuckleBall BearingHeavy WeightBuild in America (BAA)Swing Clear -Beveled Edge4.5"x4.5"(114x114mm)4.5"x4.5"(114x114mm)5"x4.5"(127x114mm)4.5"(114mm)Additional Options Available for Most HingesHinge Addition/Modification Specify List add per hingeNon-Removable PinRound Corners (specify 1/4” or 5/8” radius)Security StudsHospital TipsSecurity ScrewsNRPRC 1/4” or RC 5/8”SHHTSECReference each hinge type$3.105.207.2017.50STEEL BASEDMODEL NO. BOX QTY FULL MORTISE SWING CLEARMON 1 $ 243.10 $ –TW4 1 232.80 464.50TW4M 1 442.90–TW8 1 351.20 593.30TW8M 1 593.30–* Note: Not available with security stud hinges.TW8 CableDescription Number <strong>Price</strong>TW8 x 6´ Cable - RH 841190-00 $141.00TW8 x 6´ Cable - LH 841191-00 $141.00652 $10.10 626 ---- US26D 3 24---- ---- 630 $37.10 US32D 3 24652 $29.30 626 ---- US26D 3 24---- ---- 630 $60.60 US32D 3 24652 33.70 626 ---- US26D 3 24---- ---- 630 70.80 US32D 3 24652 64.00 626 ---- US26D 3 24BRASS / STAINLESS BASEDFULL MORTISE SWING CLEAR$ 286.30 $ –275.00 544.90533.50–418.20 836.40633.50–Electric Hinges (Listed under UL 634)4-Wire 8-Wire Electrified Hinges4-Wire (TW4 Suffix)8-Wire (TW8 Suffix)Monitor (MON Suffix)Through-Wire with monitor (TW4M Suffix or TW8M)• Available in 3 and 5 knuckle• One hinge per box, packed with wood and machine screws• Through-wire hinges cycle tested to ensure durability• <strong>Ives</strong> warranty applies-12 months from date of shipment• Through-wire rated up to 50 volts AC/DC at 3.5 ampls (max)continuous, or 16amps (max) pulse 400m sec, minimumtime between pulses is 10 seconds• Monitor up to 30 VDC @ 0.5 ampsContact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track14<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
Residential HingesMODEL SUBSTRATE MODEL NUMBER BHMA FINISH WEIGHT ORDER QTY BOX QTY LIST PRICE1010*Residential Hinge 3.5”Square Corner1011*Residential Hinge 3.5”5/8” Radius Corner1012*Residential Hinge 3.5”1/4” Radius Corner1020*Residential Hinge 4”Square Corner1021*Residential Hinge 4”5/8” Radius CornerSteelSteelSteelSteelSteelSC3P1010F-605E 632 3 3 17.80SC3P1010F-609E 638 3 3 21.30SC3P1010F-619E – 3 3 21.30SC3P1010F-620E – 3 3 21.30SC3P1010F-716E – 3 3 18.401011F-605E 632 2 6.101011F-619E 638 2 6.101011F-625E – 2 6.101011F-716E – 2 6.10SC3P1011F-605E 632 3 3 17.80SC3P1011F-609E 638 3 3 21.30SC3P1011F-619E – 3 3 21.30SC3P1011F-620E – 3 3 21.30SC3P1011F-716E – 3 3 21.30SC3P1012F-605E 632 3 3 17.80SC3P1012F-609E 638 3 3 21.30SC3P1012F-619E – 3 3 21.30SC3P1012F-716E – 3 3 21.30SC3P1020F-605E 632 3 3 21.30SC3P1020F-609E 638 3 3 23.00SC3P1020F-619E – 3 3 23.00SC3P1020F-620E – 3 3 23.00SC3P1020F-716E – 3 3 23.00SC3P1021F-605E 632 3 3 21.30SC3P1021F-609E 638 3 3 23.00SC3P1021F-619E – 3 3 23.00SC3P1021F-620E – 3 3 23.00SC3P1021F-716E – 3 3 23.00HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340* Note: SC3P (3 pack hinges) must be ordered in multiples of 3. Qty of 3 equals 9 hinges.Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1315
HINGESCONTINUOUSHINGESContinuous Hinges - Pin and BarrelSTEEL BASEDMODEL DESCRIPTION FINISH LENGTH BHMA FINISH LIST NOTES600USP 83” 600 $ 240.50600UL ListedConcealed Hinge85” 600 293.701/8” InsetNon Handed95”120”600600293.70362.90602UL Listed611UL Listed602Full SurfaceFlush MountNon Handed611Swing ClearNo Inset, Non HandedBuilt in Edge GuardUSPUSP83”85”95”120”83”85”95”120”600600600600600600600600270.40306.50306.50412.90424.70467.30467.30541.80PIVOTS700UL Listed700Concealed Hinge1/8” InsetNon HandedUS32D83”85”95”120”630630630630425.80492.90492.90602.30Numerical1-059702UL Listed705UL Listed702Full SurfaceFlush MountNon Handed705Concealed HingeNon HandedAdjusta-Stud FastenersUS32DUS32D83”85”95”120”83”85”95”120”630630630630630630630630492.90568.40568.40803.60555.60625.80625.80765.30Numerical59-437711UL Listed711Swing ClearFlush MountedSurface HingeNo Inset, Non HandedBuilt in Edge GuardUS32D83”85”95”120”630630630630477.90548.10548.10687.50Numerical438-1021715UL Listed715Concealed HingeFlush Mounted,Half WrapNon HandedBuilt in Edge GuardUS32D83”85”95”120”630630630630518.30585.30585.30725.80Numerical8200-9340Numerical1152-8190Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track16<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
Pin & Barrel Continuous Hinges - Additional OfferingsCustom Processing*Custom cut to length $15.90 List add per hingeCustom paintingContact Customer Service for pricing and color approval. Additional lead time up to6 weeks may be needed. Base price $150.00 add per hinge for Tiger/Drylac paint. Additionalcharge may apply for quantities less than ten pieces and for different paint types.Dutch Door Prep $102.40 List add per hingeHospital Tips $102.40 List add per hinge* Return Policy - requires prior approval, consult factoryElectrical ModificationsElectrical Power Transfer (EPT) prep $87.00List add per hingeHINGESCONTINUOUSHINGESElectric Through-Wire (TW8 Standard) $266.00 List add per hingeOptional Screw PacksSecurity Screws $27.70 List add per hingeWood Screws $16.40 Per packThread Forming Screws $16.40 Per packPIVOTSNo Charge Adds:1/2 wood / 1/2 machine Specify HWHMThread Forming Screws, Specify HM (recommended for grouted frames)Pilot holes requiredNumerical1-059No charge adds must be specified with original order.Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1317
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Continuous Geared HingesAluminum BasedMODEL DESCRIPTION FINISH LENGTH BHMA FINISH LIST NOTESUS28 83” 628 $ 348.20045 Heavy Duty85”95”628628348.20427.30Half Surface120” 628636.701/32” Inset, Non HandedFrame leaf 1-9/16” 313AN 83” 710464.30US2885”95”120”83”85”710710710628628464.30571.80850.50375.30375.30046 Heavy Duty95” 628458.90Half Surface120” 628685.601/32” Inset, Non HandedFrame leaf 1-15/16” 313AN 83” 710491.40US2885”95”120”83”85”710710710628628491.40610.80908.00241.90241.90053 Heavy DutyHalf Surface95”120”628628298.30455.701/32” Inset, Non Handed 313AN 83” 710300.50Frame leaf 1-9/16”85” 710300.50US2895”120”83”85”710710628628360.10608.60251.60251.60054 Heavy DutyHalf Surface95”120”628628308.00474.001/32” Inset, Non Handed 313AN 83” 710307.00Frame leaf 1-15/16”85” 710307.00US2895”120”83”85”710710628628364.60611.80145.30145.30112 Heavy DutyFull Mortise95”120”628628181.20289.60No Inset, Non Handed 313AN 83” 710 187.70Frame leaf 1-9/16”85” 710187.70US2895”120”83”710710628234.30378.50214.80157XY Heavy DutyAdjustable Full Surface95”119”628628263.60451.201/16” Inset83” 710254.90Non Handed313AN 95” 710314.70119” 710496.90045HDUL Listed046HDUL Listed053HDUL Listed054HDUL Listed112HDUL Listed157XYUL ListedNumerical8200-9340Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track18<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
Continuous Geared HingesAluminum BasedDESCRIPTION MODEL FINISH LENGTH BHMA FINISH LIST NOTES157HDUL Listed210HDUL Listed224HDUL Listed157 Heavy DutyFull Surface1/16” InsetNon Handed210 Heavy DutyFull SurfaceSwing Clear1/32” InsetNon Handed224 Heavy DutyFull Mortise1/16” InsetNon HandedUS28313ANUS28313ANUS28313AN83”85”95”120”83”85”95”120”83”85”95”120”83”85”95”120”83”85”95”120”83”85”95”120”628628628628710710710710628628628628710710710710628628628628710710710710214.80214.80263.60451.20254.90254.90314.70496.90$ 214.80214.80263.60451.20254.90254.90314.70496.90155.10155.10191.00300.50193.10193.10245.20385.10HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Geared Hinges - Additional OfferingsCustom Processing*Custom cut to length $15.90 List add per hingeCustom painting and anodized colors Contact Customer Service for pricing and color approval. Additional lead time up to 6 weeks may be needed. Base price $155.30 add per hinge for Tiger/Drylac paint.Additional charge may apply for quantities less than ten pieces and for different paint types.* Return Policy - requires prior approval, consult factoryHospital Tip (HT) $102.40 List priceElectrical ModificationsElectrical Power Transfer (EPT) prep $87.00 List add per hingeElectric Through-Wire (TW8 Standard) $266.00 List add per hingeTW8 x 6’ Power Cable (LH) 841191-00 $148.40 List priceTW8 x 6’ Power Cable (RH) 841190-00 $148.40 List priceThrough Wire Panel (TWP) option $250.00 List priceOptional Screw PacksSecurity Screws $27.70 List add per hingeWood Screws $16.40 Per packThread Forming Screws $16.40 Per packNo Charge Adds:1/2 wood / 1/2 machine Specify HWHMThread Forming Screws, Specify HM (recommended for grouted frames)Pilot holes requiredNumerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340No charge adds must be specified with original order.Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1319
PivotsPART POUND BOX* US26 * US26DMODEL DESCRIPTION RATING QTY US3 US4 US10 US10B US32 US32D SP28 SP10 SPBLK SP313 SP4HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-934072123/4” Offset Pivot7212V3/4” Offset Pivot,Jamb Mount72153/4” Offset Pivot7215FFire Rated3/4” Offset Pivot72223/4” Offset Pivot72263/4” Offset Pivot7226FFire Rated3/4” Offset Pivot72273/4” Offset Pivot7227FFire Rated3/4” Offset Pivot7230FFire Rated3/4” Offset Pivot7237FFire Rated3/4” Offset7244FFire Rated1-1/2” Offset Pivot7212 SET7212 TOP7212 BTM7212 INT7212V SET7212V TOP7212V INT7215 SET7215 TOP7215 BTM7215 INT7215PT INT7215F SET7215F TOP7215F BTM7215F INT7222 SET7222 TOP7222 BTM7222 INT7226 SET7226 TOP7226 BTM7226 INT7226PT INT7226F SET7226F TOP7226F BTM7226F INT7227 SET7227 TOP7227 BTM7227 INT7227PT INT7227F SET7227F TOP7227F BTM7227F INT7230F SET7230F TOP7230F BTM7230F INT7237F SET7237F TOP7237F BTM7237F INT7244F SET7244F TOP7244F BTM7244F INT200-200100200-100500-500100-500-500100200-200100600-600100-600-600600700-700100-700-7001001000-10001001750-1750100400-40010011111111111111111111111111111111111111111111111111$329.60 $329.60191.40 191.40200.60 200.60220.00 220.00342.80 342.80200.60 200.60220.00 220.00356.20 356.20191.40 191.40220.00 220.00200.60 200.60707.20 707.20561.90 –336.70 –391.90 –315.20 –287.60 287.60191.40 191.40186.30 186.30220.00 220.00342.80 342.80191.40 191.40205.70 205.70200.60 200.60707.20 707.20493.30 –336.70 –350.00 –315.20 –576.20 576.20191.40 191.40520.90 520.90200.60 200.60707.20 707.20725.50 –336.70 –520.90 –315.20 –616.10 –315.20 –377.60 –342.80 –753.20 –315.20 –520.90 –342.80 –637.60 –342.80 –370.50 –370.50 –$329.60191.40200.60220.00342.80200.60220.00356.20191.40220.00200.60707.20561.90336.70391.90315.20287.60191.40186.30220.00342.80191.40205.70200.60707.20493.30336.70350.00315.20576.20191.40520.90200.60707.20725.50336.70520.90315.20616.10315.20377.60342.80753.20315.20520.90342.80637.60342.80370.50370.50*Fire rated models US32 and US32D (stainless), all others US26 and US26D (brass)$329.60191.40200.60220.00342.80200.60220.00356.20191.40220.00200.60707.20––––287.60191.40186.30220.00342.80191.40205.70200.60707.20––––576.20191.40520.90200.60707.20––––––––––––––––$329.60191.40200.60220.00342.80200.60220.00356.20191.40220.00200.60707.20561.90336.70391.90315.20287.60191.40186.30220.00342.80191.40205.70200.60707.20493.30336.70350.00315.20576.20191.40520.90200.60707.20725.50336.70520.90315.20616.10315.20377.60342.80753.20315.20520.90342.80637.60342.80370.50370.50$300.90164.70171.90191.40315.20171.90191.40329.60164.70205.70178.10548.60533.10295.70363.30300.90260.90164.70158.60191.40315.20164.70191.40178.10548.60466.70295.70300.90300.90548.60164.70466.70178.10548.60698.00295.70466.70300.90588.40295.70363.30329.60725.50295.70506.60329.60616.10322.40350.00350.00$191.40116.70131.00151.50260.90131.00151.50287.60116.70224.10164.70513.80438.10246.60287.60254.80191.40116.70110.50151.50246.60116.70171.90164.70513.80397.10246.60282.50254.80480.00116.70431.90164.70513.80616.10246.60431.90254.80520.90254.80322.40282.50658.10254.80472.90282.50533.10295.70300.90309.10$191.40116.70131.00151.50260.90131.00151.50287.60116.70224.10164.70513.80438.10246.60287.60254.80191.40116.70110.50151.50246.60116.70171.90164.70513.80397.10246.60282.50254.80480.00116.70431.90164.70513.80616.10246.60431.90254.80520.90254.80322.40282.50658.10254.80472.90282.50533.10295.70300.90309.10$191.40116.70131.00151.50260.90131.00151.50287.60116.70224.10164.70513.80438.10246.60287.60254.80191.40116.70110.50151.50246.60116.70171.90164.70513.80397.10246.60282.50254.80480.00116.70431.90164.70513.80616.10246.60431.90254.80520.90254.80322.40282.50658.10254.80472.90282.50533.10295.70300.90309.10$191.40116.70131.00151.50260.90131.00151.50287.60116.70224.10164.70513.80438.10246.60287.60254.80191.40116.70110.50151.50246.60116.70171.90164.70513.80397.10246.60282.50254.80480.00116.70431.90164.70513.80616.10246.60431.90254.80520.90254.80322.40282.50658.10254.80472.90282.50533.10295.70300.90309.10$191.40116.70131.00151.50260.90131.00151.50287.60116.70224.10164.70513.80438.10246.60287.60254.80191.40116.70110.50151.50246.60116.70171.90164.70513.80397.10246.60282.50254.80480.00116.70431.90164.70513.80616.10246.60431.90254.80520.90254.80322.40282.50658.10254.80472.90282.50533.10295.70300.90309.10Contact <strong>Ives</strong> Customer Service for pricing on additional sizes and finishesBold pricing indicates item is in stock and available for Fast Track20<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
PivotsPART POUND BOX* US26 * US26DMODEL DESCRIPTION RATING QTY US3 US4 US10 US10B US32 US32D SP28 SP10 SPBLK SP313 SP4 USP7245FFire Rated1-1/2” Offset Pivot72531-1/2” Offset PivotCenter Hung72551-1/2 Offset PivotCenter Hung7255J1-1/2 Offset PivotCenter Hung72561 1/2” Offset PivotCenter Hung72591 1/2” Offset PivotCenter Hung91105FPocket PivotE = Power Transfer7245FSET7245F TOP7245F BTM7245FINT7253SET7253 TOP7253 BTM7255SET7255 TOP7255 BTM7255JSET7255J TOP7255J BTM7256SET7256 TOP7256 BTM7259SET7259 TOP7259 BTM91105FE91105F500-500100300-300500-500600-500600-6001000-10009090111111111111111111111$821.80342.80576.20370.50260.90158.60144.30287.60158.60164.70287.60158.60164.70480.00158.60391.90862.70336.70712.30388.70892.60$ ––––260.90158.60144.30287.60158.60164.70287.60158.60164.70480.00158.60391.90862.70336.70712.30––$821.80342.80576.20370.50260.90158.60144.30287.60158.60164.70287.60158.60164.70480.00158.60391.90862.70336.70712.30388.70892.60$ ––––260.90158.60144.30287.60158.60164.70287.60158.60164.70480.00158.60391.90862.70336.70712.30388.70–$ 821.80342.80576.20370.50260.90158.60144.30287.60158.60164.70287.60158.60164.70480.00158.60391.90862.70336.70712.30388.70892.60$794.20322.40561.90350.00260.90158.60124.80287.60158.60164.70287.60158.60164.70452.40158.60370.50834.10287.60684.60352.70856.50$725.50295.70506.60309.10227.20144.30104.40268.20144.30158.60268.20144.30158.60431.90144.30350.00807.40240.50664.10––$725.50 $725.50295.70 295.70506.60 506.60309.10 309.10227.20 227.20144.30 144.30104.40 104.40268.20 268.20144.30 144.30158.60 158.60268.20 268.20144.30 144.30158.60 158.60431.90 431.90144.30 144.30350.00 350.00807.40 807.40240.50 240.50664.10 664.10– –– –$725.50295.70506.60309.10227.20144.30104.40268.20144.30158.60268.20144.30158.60431.90144.30350.00807.40240.50664.10352.70856.50$725.50 $ –295.70 –506.60 –309.10 –227.20 –144.30 –104.40 –268.20 –144.30 –158.60 –268.20 –144.30 –158.60 –431.90 –144.30 –350.00 –807.40 –240.50 –664.10 –– 342.40– 831.60HINGESCONTINUOUSHINGESPIVOTS*Fire rated models US32 and US32D (stainless), all others US26 and US26D (brass)Suffix DescriptionsBTM - Bottom OnlyF - Fire RatedINT - Intermediate Pivot OnlyPT - Power TransferSET - <strong>Top</strong> and Bottom PivotTOP - <strong>Top</strong> OnlyV - Vertical Side MountNumerical1-059Numerical59-437Weather Resistant (WP) bearings available for 7215 26D and 7215F 32D bottom pivots at $60 list add. Consult factory for lead time.Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1321
NotesNumerical8200-9340Numerical1152-8190Numerical438-1021Numerical59-437Numerical1-059PIVOTSCONTINUOUSHINGESHINGESBold pricing indicates item is in stock and available for Fast Track22<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODELCB1Carry Bar w/Sex BoltsDP1Dust Proof StrikeThreshold OnlyLG1Lock Guardwith Security Pin FrameMB1Mounting BracketDP2Dust Proof StrikeFloor and /or ThresholdMB2Mounting Bracket2Elbow Cabinet CatchMB3Mounting BracketLG7Lock GuardCOR7GCoordinatorGravity Arm7” armUL ListedSUBSTRATEMODELNUMBER BHMA FINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGESteel CB1 USP 600 – – – – $ 26.30 –CB1 US3 605 – – – – 40.20 –CB1 US4 606 – – – – 40.20 –CB1 US10 612 – – – – 40.20 –CB1 US10B 613 – – – – 40.20 –CB1 US26 625 – – – – 40.20 –CB1 US26D 626 – – – – 40.20 –CB1 SPBLK 693 – – – – 26.30 –Brass DP1 US3 605 – – 1 – 22.20 –DP1 US4 606 – – 1 – 22.20 –DP1 US10 612 – – 1 – 22.20 –DP1 US10B 613 – – 1 – 22.20 –DP1 US26 625 – – 1 – 22.20 –DP1 US26D 626 – – 1 – 22.20 –Steel LG1 USP 600 – – 1 – 18.20 –LG1 US2G 604 – – 1 – 14.80 –LG1 SP313 695 – – 1 – 17.10 –Brass LG1 US4 606 – – 1 – 37.80 –LG1 US10 612 – – 1 – 37.80 –Stainless LG1 US32D 630 – – 1 – 34.30 –See Page 28Brass DP2 US3 605 – – 1 – 28.00 –See Page 28DP2 US4 606 – – 1 – 28.00 –DP2 US10 612 – – 1 – 28.00 –DP2 US10B 613 – – 1 – 28.00 –DP2 US26 625 – – 1 – 28.00 –DP2 US26D 626 – – 1 – 28.00 –Aluminum 2A3 666 0.9 – 1 20 3.40 –See Page 282A5 – 0.9 – 1 20 3.70 –2A14 669 0.9 – 1 20 3.70 –2A15 670 0.9 – 1 20 3.70 –2A92 673 0.9 – 1 20 3.40 –2A-716 – 0.9 – 1 20 3.70 –SP2A3 666 37.5 Yes 25 25 – 85.00SP2A14 669 37.5 Yes 25 25 – 92.50SP2A92 673 37.5 Yes 25 25 – 85.00Stainless LG7 US32D 630 – – 1 – 34.30 –Brass COR7G US3 605 – – 1 – 70.00 –COR7G US4 606 – – 1 – 70.00 –COR7G US10 612 – – 1 – 70.00 –COR7G US10B 613 – – 1 – 70.00 –COR7G US26 625 – – 1 – 94.50 –COR7G US26D 626 – – 1 – 58.30 –HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1323
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340MODEL SUBSTRATE MODEL NUMBER07Window LockCOR9GCoordinatorGravity Arm9” armUL ListedFS9Floor StopLG10Lock GuardCL11Cabinet LatchLG11Lock GuardWS11Wall Stop forDrywall MountingBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGEAluminum 07A3 666 1.7 – 1 20 $ 2.30 –07A10B 703 1.7 – 1 20 2.60 –07A14 669 1.7 – 1 20 2.60 –07A15 670 1.7 – 1 20 2.60 –07A92 673 1.7 – 1 20 2.30 –07A-716 – 1.7 – 1 20 2.60 –07A-BLK – 1.7 – 1 20 3.40 –07A-W – 1.7 – 1 20 3.40 –SP07A3 666 65.0 Yes 25 25 – 57.50SP07A5 – 65.0 Yes 25 25 – 85.00SP07A14 669 65.0 Yes 25 25 – 65.00SP07A92 673 65.0 Yes 25 25 – 57.50SP07A-W – 52.0 Yes 20 20 – 68.00Brass 07B3 605 2.3 – 1 10 14.10 –07B15 619 2.3 – 1 10 17.70 –07B26 625 2.3 – 1 10 17.10 –07B26D 626 2.3 – 1 10 17.10 –07B-716 – 2.6 – 1 10 17.10 –SPS07B-605 605 52.0 Yes 20 20 – 352.00SPS07B-609 609 52.0 Yes 20 20 – 352.00SPS07B-619 619 52.0 Yes 20 20 – 352.00SPS07B-620 620 52.0 Yes 20 20 – 352.00SPS07B-716 – 52.0 Yes 20 20 – 352.00Brass COR9G US3 605 – – 1 – 79.20 –COR9G US4 606 – – 1 – 79.20 –COR9G US10 612 – – 1 – 79.20 –COR9G US10B 613 – – 1 – 79.20 –COR9G US26 625 – – 1 – 94.50 –COR9G US26D 626 – – 1 – 66.70 –Brass FS9 US3 605 – – 1 – 167.70 –FS9 US4 606 – – 1 – 167.70 –FS9 US10 612 – – 1 – 167.70 –FS9 US10B 613 – – 1 – 167.70 –FS9 US26 625 – – 1 – 167.70 –FS9 US26D 626 – – 1 – 143.70 –Stainless LG10 US32D 630 – – 1 – 32.00 –Steel LG10 USP 600 – – 1 – 21.70 –Brass CL11 US3 605 – – 1 – 35.00 –CL11 US4 606 – – 1 – 27.60 –CL11 US10 612 – – 1 – 27.60 –CL11 US26D 626 – – 1 – 27.60 –Stainless LG11 US32D RH 630 – – 1 – 37.80 –LG11 US32D LH 630 – – 1 – 37.80 –Steel LG11 SP313 RH 695 – – 1 – 28.60 –LG11 SP313 LH 695 – – 1 – 28.60 –Brass WS11 US3 605 – – 1 – 37.30 –WS11 US4 606 – – 1 – 37.30 –WS11 US10 612 – – 1 – 37.30 –WS11 US10B 613 – – 1 – 37.30 –WS11 US26 625 – – 1 – 37.30 –WS11 US26D 626 – – 1 – 36.30 –Bold pricing indicates item is in stock and available for Fast Track24<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL SUBSTRATE MODEL NUMBERWS11XWall Stop forMasonry MountingCL12Cabinet LatchLG12Lock GuardFS13Floor Dome Stop1” heightLG13Lock GuardCL14Cabinet LatchLG14Lock GuardFS17Floor Dome Stop1-11/32” heightR14RiserFor FS13 and FS17Dome Stops 5/16” HeightAS18Applied StopFS18Security Floor or Wall StopFL20Filler BarWS20Manual Wall Stopand Holder forDrywall MountingBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERBOX EACH PACKAGEBrass WS11X US3 605 – – 1 – $ 39.70 –WS11X US4 606 – – 1 – 39.70 –WS11X US10 612 – – 1 – 39.70 –WS11X US10B 613 – – 1 – 39.70 –WS11X US26 625 – – 1 – 39.70 –WS11X US26D 626 – – 1 – 38.50 –Brass CL12 US3 605 – – 1 – 41.90 –CL12 US4 606 – – 1 – 37.10 –CL12 US10 612 – – 1 – 37.10 –CL12 US26D 626 – – 1 – 37.10 –Stainless LG12 US32D 630 – – 1 – 29.80 –Steel LG12 USP 600 – – 1 – 21.70 –Brass FS13 US3 605 – – 1 – 6.70 –FS13 US4 606 – – 1 – 8.00 –FS13 US10 612 – – 1 – 8.10 –FS13 US10B 613 – – 1 – 8.10 –FS13 US26 625 – – 1 – 8.00 –FS13 US26D 626 – – 1 – 6.70 –Stainless LG13 US32D 630 – – 1 – 28.60 –Steel LG13 USP 600 – – 1 – 18.80 –Brass CL14 US3 605 – – 1 – 37.10 –CL14 US4 606 – – 1 – 31.10 –CL14 US10 612 – – 1 – 31.10 –CL14 US26D 626 – – 1 – 31.10 –Stainless LG14 US32D 630 – – 1 – 46.90 –Brass FS17 US3 605 – – 1 – 7.50 –FS17 US4 606 – – 1 – 9.00 –FS17 US10 612 – – 1 – 9.20 –FS17 US10B 613 – – 1 – 9.20 –FS17 US26 625 – – 1 – 9.00 –FS17 US26D 626 – – 1 – 7.50 –Steel R14 US3 605 – – 1 – 5.70 –R14 US4 606 – – 1 – 5.70 –R14 US10 612 – – 1 – 6.30 –R14 US10B 613 – – 1 – 6.30 –R14 US26 625 – – 1 – 6.30 –R14 US26D 626 – – 1 – 7.40 –Brass AS18 US3 605 – – 1 – 44.30 –AS18 US4 606 – – 1 – 40.80 –AS18 US10 612 – – 1 – 40.80 –AS18 US10B 613 – – 1 – 44.30 –AS18 US26 625 – – 1 – 44.30 –AS18 US26D 626 – – 1 – 44.30 –Steel/ FS18S – – – 1 – 48.00 –Rubber FS18L – – – 1 – 51.40 –See page 28Brass WS20 US3 605 – – 1 – 67.50 –WS20 US4 606 – – 1 – 67.50 –WS20 US10 612 – – 1 – 67.50 –WS20 US10B 613 – – 1 – 67.50 –WS20 US26 625 – – 1 – 67.50 –WS20 US26D 626 – – 1 – 56.70 –Aluminum WS20 US28 628 – – 1 – 54.00 –Bold pricing indicates item is in stock and available for Fast TrackHINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1325
HINGESCONTINUOUSHINGESPIVOTSMODEL SUBSTRATE MODEL NUMBERWS20XManual Wall Stopand Holder forMasonry MountingCL21/21ABall Catch4 WayCL22Ball Catch3 WayBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGEBrass WS20X US3 605 – – 1 – $ 69.80 –WS20X US4 606 – – 1 – 69.80 –WS20X US10 612 – – 1 – 69.80 –WS20X US10B 613 – – 1 – 69.80 –WS20X US26 625 – – 1 – 69.80 –WS20X US26D 626 – – 1 – 60.30 –Aluminum WS20X US28 628 – – 1 – 57.50 –Brass CL21 US26D 626 – – 1 – 38.40 –CL21A US3 605 – – 1 – 40.80 –CL21A US4 606 – – 1 – 27.60 –CL21A US10 612 – – 1 – 27.60 –CL21A US26 625 – – 1 – 40.80 –CL21A US26D 626 – – 1 – 30.00 –Brass CL22 US3 605 – – 1 – 23.90 –CL22 US4 606 – – 1 – 16.80 –CL22 US10 612 – – 1 – 16.80 –CL22 US26 625 – – 1 – 23.90 –CL22 US26D 626 – – 1 – 20.30 –Numerical1-059Numerical59-437Numerical438-1021Numerical1152-819022Flush Pull25Screen Door Pull026Bar Window LiftContinued on next page.Brass 22B3 605 1.1 – 1 20 2.70 –22B5 609 2.0 – 1 20 3.10 –22B10B 613 1.3 – 1 20 3.10 –22B15 619 1.6 – 1 20 3.00 –22B26 625 1.6 – 1 20 3.10 –22B26D 626 1.1 – 1 20 3.10 –SP22B3 605 50.0 Yes 25 25 – 67.50Aluminum 25A3 666 1.2 – 1 20 1.50 –25A92 673 1.2 – 1 20 1.50 –25A-BLK – 1.2 – 1 20 2.20 –25A-W – 1.2 – 1 20 2.20 –SP25A3 666 30.0 Yes 25 25 – 37.50SP25A92 673 30.0 Yes 25 25 – 37.50Aluminum 026A3 666 1.9 – 1 10 1.60 –026A5 – 1.1 – 1 10 2.10 –026A14 669 1.8 – 1 10 2.10 –026A15 670 1.9 – 1 10 2.10 –026A92 673 1.1 – 1 10 1.60 –026A-716 – 1.1 – 1 10 2.10 –026A-BLK – 1.4 – 1 10 2.50 –026A-W – 1.4 – 1 10 2.50 –SP026A3 666 45.0 Yes 25 25 – 40.00SP026A5 – 45.0 Yes 25 25 – 52.50SP026A14 669 45.0 Yes 25 25 – 52.50SP026A92 673 45.0 Yes 25 25 – 40.00SP026A-W – – Yes 20 20 – 50.00Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track26<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL SUBSTRATE MODEL NUMBERContinued from previous page.026Bar Window LiftRL30Nylon RollerRL30ANylon Rollerw/ASA StikeFB31Automatic Flush Bolts,Metal DoorsUL 3 Hour<strong>Top</strong> and Bottom BoltP=PairT=<strong>Top</strong> Bolt OnlyB=Bottom Bolt OnlyOptional Rod LengthsAvailable18”, 24”, 36”, 48”4.20 List AddCOR32*Door Coordinator32” Channel LengthUL ListedCOR42*Door Coordinator42” Channel LengthUL ListedBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEBrass 026B3 605 – – 1 10 $ 7.30026B5 609 – – 1 10 1.00026B15 619 – – 1 10 9.00026B26 625 – – 1 10 9.00026B26D 626 – – 1 10 8.80026B-716 – – – 1 10 9.00SP026B26 625 – Yes 10 10 – 89.00SPS026B-605 605 – Yes 20 20 – 150.00SPS026B-609 609 – Yes 20 20 – 178.00SPS026B-619 619 – Yes 20 20 – 178.00SPS026B-620 620 – Yes 20 20 – 178.00SPS026B-716 – – Yes 20 20 – 178.00Brass RL30 US3 605 – – 1 – 58.90 –RL30 US4 606 – – 1 – 50.10 –RL30 US10 612 – – 1 – 52.10 –RL30 US10B 613 – – 1 – 61.00 –RL30 US26 625 – – 1 – 58.90 –RL30 US26D 626 – – 1 – 55.60 –Brass RL30-A US3 605 – – 1 – 65.90 –RL30-A US4 606 – – 1 – 57.10 –RL30-A US10 612 – – 1 – 59.50 –RL30-A US10B 613 – – 1 – 68.30 –RL30-A US26 625 – – 1 – 65.90 –RL30-A US26D 626 – – 1 – 62.70 –Steel FB31P-12-MD US3 605 – – 1 – 159.10 –FB31P-12-MD US4 606 – – 1 – 159.10 –FB31P-12-MD US10 612 – – 1 – 159.10 –FB31P-12-MD US10B 613 – – 1 – 159.10 –Stainless FB31P-12-MD US32 629 – – 1 – 159.10 –FB31P-12-MD US32D 630 – – 1 – 159.10 –Brass FB31T-12-MD US3 605 – – 1 – 83.90 –FB31T-12-MD US4 606 – – 1 – 83.90 –FB31T-12-MD US10 612 – – 1 – 83.90 –FB31T-12 -MD US10B 613 – – 1 – 83.90 –Stainless FB31T-12-MD US32 629 – – 1 – 83.90 –FB31T-12-MD US32D 630 – – 1 – 83.90 –Brass FB31B-12-MD US3 605 – – 1 – 83.90 –FB31B-12-MD US4 606 – – 1 – 83.90 –FB31B12-MD US10 612 – – 1 – 83.90 –FB31B-12-MD US10B 613 – – 1 – 83.90 –Stainless FB31B-12-MD US32 629 – – 1 – 83.90 –FB31B-12-MD US32D 630 – – 1 – 83.90 –Aluminum COR32 US28 628 – – 1 – 129.20 –COR32 315AN 711 – – 1 – 168.80 –COR32 US26D 713 – – 1 – 250.30 –COR32 US28w/FL20 628 – – 1 – 141.30 –Aluminum COR42 US28 628 – – 1 – 139.10 –COR42 315AN 711 – – 1 – 179.80 –COR42 US26D 713 – – 1 – 266.00 –COR42 US28w/FL20 628 – – 1 – 151.20 –COR42 US28w/FL32 628 – – 1 – 153.70 –COR42 US28w/FL44 628 – – 1 – 157.40 –HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1327
HINGESCONTINUOUSHINGESPIVOTSMODEL SUBSTRATE MODEL NUMBERCOR52*Door Coordinator52” Channel LengthUL ListedCOR60*Door Coordinator60” Channel LengthUL ListedCOR72*Door Coordinator72” Channel LengthUL ListedFL20Filler Bar 20” LengthBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGEAluminum COR52 US28 628 – – 1 – $ 131.60 –COR52 315AN 711 – – 1 – 170.90 –COR52 US26D 713 – – 1 – 269.80 –COR52 US28w/FL20 628 – – 1 – 143.80 –COR52 US28w/FL32 628 – – 1 – 146.30 –COR52 US28w/FL44 628 – – 1 – 150.00 –Aluminum COR60 US28 628 – – 1 – 153.60 –COR60 315AN 711 – – 1 – 195.70 –COR60 US26D 713 – – 1 – 284.10 –COR60 US28w/FL20 628 – – 1 – 165.70 –COR60 US28w/FL32 628 – – 1 – 168.20 –COR60 US28w/FL44 628 – – 1 – 171.90 –Aluminum COR72 US28 628 – – 1 – 174.70 –COR72 315AN 711 – – 1 – 235.80 –COR72 US26D 713 – – 1 – 347.50 –COR72 US28w/FL20 628 – – 1 – 186.80 –COR72 US28w/FL32 628 – – 1 – 189.30 –COR72 US28w/FL44 628 – – 1 – 193.00 –Aluminum FL20 US28 628 – – 1 – 12.20 –FL20 315AN 711 – – 1 – 39.00 –FL20 US26D 713 – – 1 – 57.20 –Numerical1-059Numerical59-437Numerical438-1021FL32Filler Bar32” LengthFL44Filler Bar44” LengthMB1Mounting BracketStop Widths Over 2-1/2”MB1F & MB1VMounting BracketStop Widths 1-1/2” - 2-1/4”MB2Mounting BracketStop Widths Up to 2-1/2”Aluminum FL32 US28 628 – – 1 – 14.60 –FL32 315AN 711 – – 1 – 41.30 –FL32 US26D 713 – – 1 – 62.00 –Aluminum FL44 US28 628 – – 1 – 18.30 –FL44 315AN 711 – – 1 – 44.90 –FL44 US26D 713 – – 1 – 72.90 –Aluminum MB1 USP 600 – – 1 – 16.50 –MB1 SP28 689 – – 1 – 23.60 –MB1 SPBLK 622 – – 1 – 23.60 –Steel MB1F USP 600 – – 1 – 42.50 –MB1F SP28 689 – – 1 – 42.50 –MB1F SPBLK 622 – – 1 – 42.50 –MB1V USP 600 – – 1 – 68.10 –MB1V SP28 689 – – 1 – 68.10 –MB1V SPBLK 622 – – 1 – 68.10 –Aluminum MB2 USP 600 – – 1 – 19.50 –MB2 SP28 689 – – 1 – 26.70 –MB2 SPBLK 622 – – 1 – 26.70 –Numerical1152-8190Numerical8200-9340MB2F & MB2VMounting BracketStop Widths 2-7/8” - 3-1/4”MB3F & MB3VMounting BracketStop Widths Over 3-3/8”Steel MB2F USP 600 – – 1 – 42.50 –* Special factory preparation for use with vertical rod exit devices available. Add $106.10 List.MB2F SP28 689 – – 1 – 42.50 –MB2F SPBLK 622 – – 1 – 42.50 –MB2V USP 600 – – 1 – 68.10 –MB2V SP28 689 – – 1 – 68.10 –MB2V SPBLK 622 – – 1 – 68.10 –Steel MB3F USP 600 – – 1 – 42.50 –MB3F SP28 689 – – 1 – 42.50 –MB3F SPBLK 622 – – 1 – 42.50 –MB3V USP 600 – – 1 – 68.10 –MB3V SP28 689 – – 1 – 68.10 –MB3V SPBLK 622 – – 1 – 68.10 –Bold pricing indicates item is in stock and available for Fast Track28<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL SUBSTRATE MODEL NUMBERFB32Automatic Flush Bolts,Metal DoorsUL 3 Hour<strong>Top</strong> Bolt w/AuxiliaryFire LatchCOR32*Door CoordinatorFL32Filler BarRL32Nylon RollerRL32ANylon Rollerw/ASA StrikeFB33<strong>Top</strong> Auto Flush Boltw/AuxiliaryFire LatchRetrofit PlateWS33Wall StopFor Drywall MountingWS33XWall StopFor Masonary MountingRL36/36ARoller Latch MortiseRL38Roller Latch Surface Mount40Modern Surface BoltPacked with Universaland Mortise StrikeContinued on next page.BHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEBrass FB32-12-MD US3 605 – – 1 – $ 159.10 –FB32-12-MD US4 606 – – 1 – 159.10 –FB32-12-MD US10 612 – – 1 – 159.10 –FB32-12-MD US10B 613 – – 1 – 159.10 –Stainless FB32-12-MD US32 629 – – 1 – 159.10 –FB32-12-MD US32D 630 – – 1 – 159.10 –See page 27See page 28RL32 US3 605 – – 1 – 79.60 –RL32 US4 606 – – 1 – 75.20 –RL32 US10 612 – – 1 – 78.10 –RL32 US10B 613 – – 1 – 82.60 –RL32 US26D 626 – – 1 – 75.20 –RL32 US26 625 – – 1 – 79.60 –Brass RL32-A US3 605 – – 1 – 86.60 –RL32-A US4 606 – – 1 – 82.20 –RL32-A US10 612 – – 1 – 85.40 –RL32-A US10B 613 – – 1 – 90.00 –RL32-A US26 625 – – 1 – 86.60 –RL32-A US26D 626 – – 1 – 82.20 –Brass FB33-12-MD US3 605 – – 1 – 164.30 –FB33-12-MD US4 606 – – 1 – 164.30 –FB33-12-MD US10 612 – – 1 – 164.30 –FB33-12-MD US10B 613 – – 1 – 164.30 –Stainless FB33-12-MD US32 629 – – 1 – 164.30 –FB33-12-MD US32D 630 – – 1 – 164.30 –Brass WS33 US26D 626 – – 1 – 62.60 –Brass WS33X US26D 626 – – 1 – 68.60 –Stainless RL36 US32D 630 – – 1 – 42.30 –RL36-A US32D 630 – – 1 – 49.90 –Stainless RL38 US32D 630 – – 1 – 40.00 –Aluminum 40A-716 3 IN – – – 1 10 6.30 –40PA28 3 IN 628 – – 1 10 6.30 –SC40A3 3 IN 666 – Yes 5 5 – 35.580SC40A15 3 IN 670 – Yes 5 5 – 38.50Brass SC40A-716 3 IN – – Yes 5 5 – 38.5040B3 3 IN 605 1.9 – 1 10 13.80 –40B5 3 IN 609 1.9 – 1 10 13.80 –40B10B 3 IN 613 1.9 – 1 10 14.50 –40B15 3 IN 619 1.9 – 1 10 13.80 –40B26 3 IN 625 1.9 – 1 10 14.50 –Aluminum 40B26D 3 IN 626 1.9 – 1 10 14.50 –Brass 40PA28 4 IN 628 0.9 – 1 10 7.00 –40B3 4 IN 605 2.4 – 1 10 14.50 –40B5 4 IN 609 2.4 – 1 10 14.60 –40B10B 4 IN 613 2.4 – 1 10 15.20 –40B15 4 IN 619 2.4 – 1 10 14.60 –40B26 4 IN 625 2.4 – 1 10 15.20 –40B26D 4 IN 626 2.4 – 1 10 15.20 –HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340* Special factory preparation for use with vertical rod exit devices available. Add $106.10 List.Bold Bold pricing pricing indicates indicates item item is in is stock in stock and and available available for Fast for Fast Track Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1329
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340MODEL SUBSTRATE MODEL NUMBERContinued from previous page.40Modern Surface BoltPacked with Universaland Mortise StrikeFS40Auto Floor Type HolderFloor Clearance 1/2” or lessWS40Automatic Wall Stopand HolderFB41Automatic Flush BoltWood Door<strong>Top</strong> and Bottom BoltUL Listed 90 MinutesP=PairT=<strong>Top</strong> Bolt OnlyB=Bottom Bolt OnlyFS41AutomaticFloor Type HolderFloor Clearance9/16” to 1-1/16”42Pocket Door BoltCOR42Door CoordinatorBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGEAluminum 40PA28 6 IN 628 1.1 – 1 10 $ 7.70 –Brass 40B3 6 IN 605 3.5 – 1 10 17.00 –40B5 6 IN 609 3.5 – 1 10 17.00 –40B10B 6 IN 613 3.5 – 1 10 17.70 –40B15 6 IN 619 3.5 – 1 10 17.00 –40B26 6 IN 625 3.5 – 1 10 17.70 –40B26D 6 IN 626 3.5 – 1 10 17.70 –Brass FS40 US3 605 – – 1 – 70.80 –FS40 US4 606 – – 1 – 52.90 –FS40 US10 612 – – 1 – 70.80 –FS40 US10B 613 – – 1 – 70.80 –FS40 US26 625 – – 1 – 70.80 –FS40 US26D 626 – – 1 – 52.90 –Brass WS40 US3 605 – – 1 – 95.00 –WS40 US4 606 – – 1 – 95.00 –WS40 US10 612 – – 1 – 95.00 –WS40 US10B 613 – – 1 – 95.00 –WS40 US26 625 – – 1 – 95.00 –WS40 US26D 626 – – 1 – 89.10 –Aluminum WS40 US28 628 – – 1 – 75.80 –Brass FB41P-WD US3 605 – – 1 – 166.30 –FB41P-WD US4 606 – – 1 – 166.30 –FB41P-WD US10 612 – – 1 – 166.30 –FB41P-WD US10B 613 – – 1 – 166.30 –Stainless FB41P-WD US32 629 – – 1 – 166.30 –FB41P-WD US32D 630 – – 1 – 166.30 –Brass FB41T-WD US3 605 – – 1 – 87.10 –FB41T-WD US4 606 – – 1 – 87.10 –FB41T-WD US10 612 – – 1 – 87.10 –FB41T-WD US10B 613 – – 1 – 87.10 –Stainless FB41T-WD US32 629 – – 1 – 87.10 –FB41T-WD US32D 630 – – 1 – 87.10 –Brass FB41B-WD US3 605 – – 1 – 87.10 –FB41B-WD US4 606 – – 1 – 87.10 –FB41B-WD US10 612 – – 1 – 87.10 –FB41B-WD US10B 613 – – 1 – 87.10 –Stainless FB41B-WD US32 629 – – 1 – 87.10 –FB41B-WD US32D 630 – – 1 – 87.10 –Brass FS41 US3 605 – – 1 – 73.60 –FS41 US4 606 – – 1 – 56.00 –FS41 US10 612 – – 1 – 73.60 –FS41 US10B 613 – – 1 – 73.60 –FS41 US26 625 – – 1 – 73.60 –FS41 US26D 626 – – 1 – 56.00 –Brass 42B3 605 0.9 – 1 10 11.20 –See page 2742B4 606 0.9 – 1 10 11.20 –42B5 609 0.9 – 1 10 12.50 –42B10 612 0.9 – 1 10 13.00 –42B10B 613 0.9 – 1 10 13.00 –42B15 619 0.9 – 1 10 12.50 –42B26 625 0.9 – 1 10 13.00 –42B26D 626 0.9 – 1 10 13.00 –Bold pricing indicates item is in stock and available for Fast Track30<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
FB42Automatic Flush BoltWood DoorUL 20 Minutes<strong>Top</strong> Boltw/ Auxiliary Fire LatchFS42Automatic FloorType HolderFloor Clearance1-1/8” to 1-9/16”FS43Automatic FloorType HolderFloor Clearance1-5/8” to 2-11/16”FL44Filler BarWS45Wall StopFor Drywall MountingWS45XWall StopFor Masonary MountingS48Mortise BoltS48Strike PackageFB51UL 3 HourConstant Latching <strong>Top</strong>and AutomaticBottom Bolt, Metal DoorP=PairT=<strong>Top</strong> Bolt OnlyB=Bottom Bolt OnlyOptional Rod LengthsAvailable18”, 24”, 36”, 48”4.10 List AddMODEL SUBSTRATE MODEL NUMBERBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDPER BOX EACHLIST PRICEPACKAGEBrass FB42-WD US3 605 – – 1 – $ 168.00 –FB42-WD US4 606 – – 1 – 168.00 –FB42-WD US10 612 – – 1 – 168.00 –FB42-WD US10B 613 – – 1 – 168.00 –Stainless FB42-WD US32 629 – – 1 – 168.00 –FB42-WD US32D 630 – – 1 – 168.00 –Brass FS42 US3 605 – – 1 – 88.60 –FS42 US4 606 – – 1 – 70.80 –FS42 US10 612 – – 1 – 88.60 –FS42 US10B 613 – – 1 – 88.60 –FS42 US26 625 – – 1 – 88.60 –FS42 US26D 626 – – 1 – 70.80 –Brass FS43 US3 605 – – 1 – 97.50 –FS43 US4 606 – – 1 – 79.80 –FS43 US10 612 – – 1 – 97.50 –FS43 US10B 613 – – 1 – 97.50 –FS43 US26 625 – – 1 – 97.50 –FS43 US26D 626 – – 1 – 79.80 –COR52Door CoordinatorSee page 28Brass WS45 US3 605 – – 1 – 127.10 –WS45 US4 606 – – 1 – 127.10 –WS45 US10 612 – – 1 – 127.10 –WS45 US10B 613 – – 1 – 127.10 –WS45 US26 625 – – 1 – 127.10 –WS45 US26D 626 – – 1 – 124.00 –Aluminum WS45 US28 628 – – 1 – 100.00 –Brass WS45X US3 605 – – 1 – 134.50 –WS45X US4 606 – – 1 – 134.50 –WS45X US10 612 – – 1 – 134.50 –WS45X US10B 613 – – 1 – 134.50 –WS45X US26 625 – – 1 – 134.50 –WS45X US26D 626 – – 1 – 131.30 –Aluminum WS45X US28 628 – – 1 – 107.30 –Brass S48B3 605 2.6 – 1 10 15.10 –S48B5 609 2.6 – 1 10 18.10 –S48B10B 613 2.6 – 1 10 17.40 –S48B15 619 2.6 – 1 10 16.70 –S48B26 625 2.6 – 1 10 17.40 –S48B26D 626 2.6 – 1 10 17.40 –09-40-605 605 – – 1 – 4.20 –09-40-613 613 – – 1 – 4.20 –09-40-626 626 – – 1 – 4.20 –Brass FB51P-12-MD US3 605 – – 1 – 159.10 –FB51P-12-MD US4 606 – – 1 – 159.10 –FB51P-12-MD US10 612 – – 1 – 159.10 –Stainless FB51P-12-MD US10B 613 – – 1 – 159.10 –FB51P-12-MD US32 629 – – 1 – 159.10 –Brass FB51P-12-MD US32D 630 – – 1 – 159.10 –FB51T-12-MD US3 605 – – 1 – 83.00 –FB51T-12-MD US4 606 – – 1 – 83.00 –FB51T-12-MD US10 612 – – 1 – 83.00 –Stainless FB51T-12-MD US10B 613 – – 1 – 83.00 –FB51T-12-MD US32 629 – – 1 – 83.00 –FB51T-12-MD US32D 630 – – 1 – 83.00 –See page 28Bold pricing indicates item is in stock and available for Fast TrackHINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1331
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340MODEL SUBSTRATE MODEL NUMBERFB52Flush BoltUL 3 HourConstant Latching <strong>Top</strong>w/ AuxiliaryFire LatchFB53UL 3 HourConstant Latching <strong>Top</strong>w/ Auxiliary Fire Latchand Retrofit Plate054Dutch Door Bolt059Handrail BracketBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGEBrass FB52-12-MD US3 605 – – 1 – $ 159.10 –FB52-12-MD US4 606 – – 1 – 159.10 –FB52-12-MD US10 612 – – 1 – 159.10 –FB52-12-MD US10B 613 – – 1 – 159.10 –Stainless FB52-12-MD US32 629 – – 1 – 159.10 –FB52-12-MD US32D 630 – – 1 – 159.10 –Brass FB53-12-MD US3 605 – – 1 – 164.30 –FB53-12-MD US4 606 – – 1 – 164.30 –FB53-12-MD US10 612 – – 1 – 164.30 –FB53-12-MD US10B 613 – – 1 – 164.30 –Stainless FB53-12-MD US32 629 – – 1 – 164.30 –FB53-12-MD US32D 630 – – 1 – 164.30 –Brass 054B3 605 2.3 – 1 5 40.00 –054B4 606 2.3 – 1 5 40.00 –054B10 612 2.3 – 1 5 36.40 –054B10B 613 2.3 – 1 5 43.80 –054B15 619 2.3 – 1 5 45.40 –054B26 625 2.3 – 1 5 43.80 –054B26D 626 2.3 – 1 5 40.00 –Aluminum 059A3 666 3.2 – 1 20 3.00 –059A5 – 3.2 – 1 20 3.00 –059A10 668 3.2 – 1 20 3.00 –059A10B 703 3.2 – 1 20 3.00 –059A14 669 3.2 – 1 20 3.00 –059A15 670 3.2 – 1 20 3.00 –059A92 673 3.2 – 1 20 3.00 –059A-716 716 3.2 – 1 20 3.00 –059A-BLK – 3.3 – 1 20 3.80 –059A-W – 3.3 – 1 20 3.80 –SP059A3 666 68.0 Yes 20 20 60.00SP059A5 – 68.0 Yes 20 20 60.00SP059A14 669 68.0 Yes 20 20 60.00SP059A92 673 68.0 Yes 20 20 60.00Brass 059B3 605 3.2 – 1 10 17.00 –059B5 609 3.2 – 1 10 23.40 –059B10B 613 3.2 – 1 10 19.40 –059B15 619 3.2 – 1 10 19.40 –059B15A 620 3.2 – 1 10 19.40 –059B19 622 3.2 – 1 10 19.40 –059B26 625 3.2 – 1 10 23.40 –059B26D 626 3.2 – 1 10 23.40 –059B-716 – 3.2 – 1 10 19.40 –SC059B-605 605 – Yes 5 5 – 87.00SC059B-609 609 – Yes 5 5 – 120.00SC059B-619 619 – Yes 5 5 – 100.50SC059B-620 620 – Yes 5 5 – 100.50SC059B-716 – – Yes 5 5 – 100.50SP059B10B 613 37.0 Yes 10 10 – 201.00SP059B26 625 37.0 Yes 10 10 – 240.00SPS059B-605 605 - Yes 10 10 – 174.00SPS059B-609 609 - Yes 10 10 – 240.00SPS059B-619 619 - Yes 10 10 – 201.00SPS059B-620 620 - Yes 10 10 – 201.00SPS059B-716 – - Yes 10 10 – 201.00Zinc ** 059Z-619E – – – 1 20 4.50 –Bold pricing indicates item is in stock and available for Fast Track32<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL SUBSTRATE MODEL NUMBERCOR52Door Coordinator59Handrail Bracket060Flexible Door Stop3” Projection060 Rubber Tips60Door Stop3-3/4” Projection60 Rubber TipsCOR60Door CoordinatorSee page 28BHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEAluminum 59A3 666 1.6 – 1 10 $3.10 –59A5 – 2.1 – 1 10 3.70 –59A10B 703 3.2 – 1 10 5.30 –59A14 669 2.1 – 1 10 3.70 –59A15 670 2.0 – 1 10 3.70 –59A92 673 3.2 – 1 10 3.10 –59A-716 – 2.0 – 1 10 3.70 –SP59A3 666 45.0 Yes 15 15 – 46.50SP59A5 – 45.0 Yes 15 15 – 55.50SP59A14 669 45.0 Yes 15 15 – 55.50SP59A92 673 45.0 Yes 15 15 – 46.50Brass 59B3 605 3.8 – 1 10 17.90 –59B5 609 3.8 – 1 10 20.60 –59B15 619 3.8 – 1 10 20.60 –59B26 625 3.8 – 1 10 20.60 –59B26D 626 3.8 – 1 10 20.60 –59B-716 – 3.8 – 1 10 20.60 –SP59B3 605 41.0 Yes 10 10 – 179.00Steel 060F3 632 1.1 – 1 20 1.00 –060F5 638 1.1 – 1 20 1.00 –060F10 639 1.1 – 1 20 1.00 –060F10B 640 1.1 – 1 20 1.00 –060F14 645 1.1 – 1 20 1.00 –060F15 646 1.1 – 1 20 1.00 –060F26D 652 1.1 – 1 20 1.00 –SP060F3 632 145.0 Yes 50 50 – 50.00SP060F5 638 145.0 Yes 50 50 – 50.00SP060F10B 640 145.0 Yes 50 50 – 50.00SP060F14 645 145.0 Yes 50 50 – 50.00SRT (WSPART.1076) 9 – Yes 100 100 – 30.00Aluminum 60A3 666 1.5 – 1 20 3.00 –60A10B 703 1.5 – 1 20 4.00 –60A14 669 1.5 – 1 20 3.00 –60A92 673 1.5 – 1 20 3.00 –Brass 60B3 605 1.9 – 1 10 10.50 –See page 2860B4 606 1.9 – 1 10 10.50 –60B5 609 1.9 – 1 10 10.50 –60B10 612 1.9 – 1 10 13.90 –60B10B 613 1.9 – 1 10 13.90 –60B15 619 1.9 – 1 10 13.90 –60B26 625 1.9 – 1 10 13.90 –60B26D 626 1.9 – 1 10 13.90 –RT (WSPART.1075) – – Yes 100 100 – 20.00HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1333
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-43Numerical438-1021Numerical1152-8190Numerical8200-9340MODEL SUBSTRATE MODEL NUMBER061Flexible Door Stop4” ProjectionRubber Tip -Flexible Stops61Solid Door Stop3-3/16” Projection61Solid Door Stop3-1/8” ProjectionContinued on next page.BHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGESteel 061F3 632 1.4 – 1 20 $ 1.10 –061F5 638 1.4 – 1 20 1.10 –061F10 639 1.4 – 1 20 1.10 –061F10B 640 1.4 – 1 20 1.10 –061F14 645 1.4 – 1 20 1.10 –061F26D 652 1.4 – 1 20 1.10 –061F-W – 1.4 – 1 20 1.10 –SP061F3 632 47.5 Yes 25 25 – 27.50SP061F5 638 47.5 Yes 25 25 – 27.50SP061F14 645 47.5 Yes 25 25 – 27.50Rubber SRT (WSPART.1076) – – Yes 100 100 – 30.00Aluminum 61A3 666 1.2 – 1 20 3.00 –61A5 – 1.2 – 1 20 3.00 –61A10 668 1.2 – 1 20 3.00 –61A10B 703 1.2 – 1 20 3.00 –61A14 669 1.2 – 1 20 3.00 –61A15 670 1.2 – 1 20 3.00 –61A19 – 1.2 – 1 20 3.00 –61A92 673 1.2 – 1 20 3.00 –61A-716 – 1.2 – 1 20 3.00 –61A-BLK – 1.3 – 1 20 3.30 –61A-W – 1.3 – 1 20 3.30 –SP61A10B 703 42.5 Yes 25 25 – 77.50SP61A3 666 42.5 Yes 25 25 – 77.50SP61A5 – 42.5 Yes 25 25 – 77.50SP61A14 669 42.5 Yes 25 25 – 77.50SP61A92 673 42.5 Yes 25 25 – 77.50SP61A-BLK – 20.0 Yes 10 10 – 33.00SP61A-W – 50.0 Yes 25 25 – 82.50Brass 61B3 605 1.4 – 1 10 10.50 –61B4 606 1.4 – 1 10 10.50 –61B5 609 1.4 – 1 10 10.50 –61B10 612 1.4 – 1 10 13.90 –61B10B 613 1.4 – 1 10 13.90 –61B15 619 1.4 – 1 10 13.90 –61B15A 620 1.4 – 1 10 13.90 –61B19 622 1.4 – 1 10 13.90 –61B26 625 1.4 – 1 10 13.90 –61B26D 626 1.4 – 1 10 10.50 –SC61B-605 605 – Yes 5 5 – 53.50SC61B-609 609 – Yes 5 5 – 53.50SC61B-619 619 – Yes 5 5 – 72.00SC61B-620 620 – Yes 5 5 – 72.00SC61B-716 716 – Yes 5 5 – 72.00SP61B 10B 613 – Yes 10 10 – 144.00SP61B26 (WS.10347) 625 – Yes 10 10 – 144.00SPS61B-605 605 – Yes 20 20 – 214.00SPS61B-609 609 – Yes 20 20 – 214.00SPS61B-619 619 – Yes 20 20 – 288.00SPS61B-620 620 – Yes 20 20 – 288.00SPS61B-716 – – Yes 20 20 – 288.00Bold pricing indicates item is in stock and available for Fast Track34<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
61Solid Door Stop3-3/16” ProjectionContinued from previous page.61 Rubber TipsFB61Flush Bold for Wood DoorUL 90 MinuteConstant Latching <strong>Top</strong>and AutomaticBottom BoltP=Pair (<strong>Top</strong> halfw/automaticbottom bolt)T=<strong>Top</strong> BoltOnlyMODEL SUBSTRATE MODEL NUMBERFB62Flush Bolt for Wood DoorUL 20 MinuteConstant Latching <strong>Top</strong>w/Auxiliary Fire Latch63Flexible Door Stop63 Rubber Tips64Door Stop3-1/4” Projection64 Rubber TipsSR64Door SilencerWS65Wall StopWS65 Rubber TipsSR65Door SilencerSR66Door SilencerBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEZinc 61Z-619E (2 per bag) – 4.1 – 1 20 $ 5.50 –61Z-716E – – – 1 20 3.50 –SC61Z-605E – – Yes 5 5 – 16.00SC61Z-619E – – Yes 5 5 – 19.50SC61Z-716E – – Yes 5 5 – 19.50RT (WSPART.1075) – – Yes 100 100 – 20.00Brass FB61P-WD US3 605 – – 1 – 168.00 –FB61P-WD US4 606 – – 1 – 168.00 –FB61P-WD US10 612 – – 1 – 168.00 –FB61P-WD US10B 613 – – 1 – 168.00 –Stainless FB61P-WD US32 629 – – 1 – 168.00 –FB61P-WD US32D 630 – – 1 – 168.00 –Brass FB61T-WD US3 605 – – 1 – 87.10 –FB61T-WD US4 606 – – 1 – 87.10 –FB61T-WD US10 612 – – 1 – 87.10 –FB61T-WD US10B 613 – – 1 – 87.10 –Stainless FB61T-WD US32 629 – – 1 – 87.10 –FB61T-WD US32D 630 – – 1 – 87.10 –Steel FB62-WD US3 605 – – 1 – 168.00 –FB62-WD US4 606 – – 1 – 168.00 –FB62-WD US10 612 – – 1 – 168.00 –FB62-WD US10B 613 – – 1 – 168.00 –Stainless FB62-WD US32 629 – – 1 – 168.00 –FB62-WD US32D 630 – – 1 – 168.00 –Steel 63F-605E 632 2.7 – 1 20 0.90 –63F-609E 638 2.7 – 1 20 0.90 –63F-619E 646 1.8 – 1 20 0.90 –63F-716E – 1.8 – 1 20 0.90 –63F-W – 1.8 – 1 20 0.90 –RT (WSPART.1075) – – Yes 100 100 – 20.00Aluminum 64A3 666 2.3 – 1 20 2.50 –64A10B 703 2.3 – 1 20 2.50 –64A92 673 2.3 – 1 20 2.50 –Brass 64B3 605 – – 1 10 9.50 –64B4 606 – – 1 10 10.30 –64B5 609 2.1 – 1 10 12.20 –64B10 612 2.3 – 1 10 12.20 –64B10B 613 2.3 – 1 10 12.20 –64B15 619 2.3 – 1 10 12.20 –64B26 625 2.3 – 1 10 12.20 –64B26D 626 2.3 – 1 10 12.20 –RT (WSPART.1075) – – Yes 100 100 – 20.00SR64 GRY (100/pk) – 2.1 – 1 100 – 26.20SR64 GRY - BULK – – – 1 2,500 398.30 –(2500/pk)Aluminum WS65 US3AL 666 2.8 – 1 20 4.00 –WS65 US10AL 703 2.1 – 1 20 4.00 –WS65 US10B-AL 666 2.8 – 1 20 4.00 –WS65 US27 664 – – 1 20 4.00 –SPWS65 US3AL 673 – Yes 25 25 – 100.00SPWS65 US27 – – Yes 25 25 – 100.00RT (WSPART.1075) – – Yes 100 100 – 20.00SR65 GRY (100/pk) – – – 1 100 26.20 –SR66 BRN (100/pk) – – – 1 100 26.20 –SR66 GRY (100/pk) – – – 1 100 26.20 –SR66 WHT (100/pk) – – – 1 100 26.20 –HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1335
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340MODEL SUBSTRATE MODEL NUMBER066Casement Fastener66Casement Fastener69Hinge Pin Door StopDoor Opening Adjustments70° - 100°69 Rubber Tip70Hinge Pin Door StopDoor Opening Adjustments85° - 125°Continued on next page.BHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGEAluminum 066A3 RS MS SS 666 – – 1 10 $ 5.40 –066A5 RS MS SS – – – 1 10 5.40 –066A10B RS MS SS 703 – – 1 10 5.40 –066A14 RS MS SS 669 – – 1 10 5.40 –066A92 RS MS SS 673 – – 1 10 5.40 –Brass 066B3 RS MS SS 605 – – 1 10 23.70 –066B5 RS MS SS 609 – – 1 10 28.60 –066B15 RS MS SS 619 – – 1 10 29.80 –066B26 RS MS SS 625 – – 1 10 28.60 –066B26D RS MS SS 626 – – 1 10 28.60 –Aluminum 66A3 RS MS SS 666 – – 1 10 6.20 –66A5 RS MS SS – – – 1 10 6.20 –66A14 RS MS SS 669 – – 1 10 6.20 –66A92 RS MS SS 673 – – 1 10 6.20 –Brass 66B3 RS MS SS 605 – – 1 10 29.10 –66B5 RS MS SS 609 – – 1 10 29.10 –66B15 RS MS SS 619 – – 1 10 29.10 –66B26 RS MS SS 625 – – 1 10 29.10 –66B26D RS MS SS 626 – – 1 10 29.10 –66B716 RS MS SS – – – 1 10 29.10 –Steel 69F3 632 2.6 – 1 20 3.70 –69F5 638 2.6 – 1 20 3.70 –69F10 639 2.6 – 1 20 3.70 –69F10B 640 2.6 – 1 20 3.70 –69F14 645 2.6 – 1 20 3.70 –69F15 646 2.6 – 1 20 3.70 –69F15A 647 2.6 – 1 20 3.70 –69F26 651 2.6 – 1 20 3.70 –69F26D 652 2.6 – 1 20 3.70 –SP69F3 632 82.5 Yes 25 25 – 92.50SP69F5 635 82.5 Yes 25 25 – 92.50SP69F14 645 82.5 Yes 25 25 – 92.5009-310 – – – 1 1 0.40 –Aluminum 70A3 666 1.3 – 1 20 2.00 –70A4 667 1.3 – 1 20 2.00 –70A5 – 1.3 – 1 20 2.30 –70A10 668 1.3 – 1 20 2.00 –70A10B 703 1.3 – 1 20 2.30 –70A14 669 1.3 – 1 20 2.30 –70A15 670 1.3 – 1 20 2.30 –70A92 673 1.3 – 1 20 2.00 –70A-716 – 1.3 – 1 20 2.30 –70A-BLK – 1.4 – 1 20 2.80 –70A-W – 1.4 – 1 20 2.80 –SP70A3 666 55.0 Yes 25 25 – 50.00SP70A5 – 55.0 Yes 25 25 – 57.50SP70A10 668 55.0 Yes 25 25 – 50.00SP70A92 673 55.0 Yes 25 25 – 50.00Brass 70B3 605 1.4 – 1 10 9.90 –70B4 606 1.4 – 1 10 9.90 –70B5 609 1.4 – 1 10 12.40 –70B10 612 1.4 – 1 10 12.40 –70B10B 613 1.4 – 1 10 12.40 –70B15 619 1.4 – 1 10 12.40 –70B19 622 1.4 – 1 10 12.40 –70B26 625 1.4 – 1 10 12.40 –70B26D 626 1.4 – 1 10 12.40 –Bold pricing indicates item is in stock and available for Fast Track36<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL SUBSTRATE MODEL NUMBER70Hinge Pin Door StopDoor Opening Adjustments85° - 125°Continued from previous page.70 Rubber Tips71Casement Adjuster72Door SaverResidentialCOR72Door Coordinator73Door SaverCommercialBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEBrass SC70B-605 605 – Yes 5 5 – $ 51.00SC70B-609 609 – Yes 5 5 – 63.00SC70B-619 619 – Yes 5 5 – 63.00SC70B-620 620 – Yes 5 5 – 63.00SC70B-716 – – Yes 5 5 – 63.00SPS70B-605 605 – Yes 15 15 – 154.50SPS70B-609 609 – Yes 15 15 – 189.00SPS70B-619 619 – Yes 15 15 – 189.00SPS70B-620 620 – Yes 15 15 – 189.00SPS70B-716 – – Yes 15 15 – 189.00Zinc 70Z-406E – – – 1 10 2.80 –70Z-716E – – – 1 20 2.80 –SC70Z-605E – 1.5 Yes 5 5 – 14.50SC70Z-619E – 1.5 Yes 5 5 – 16.50SC70Z-716E – 1.5 Yes 5 5 – 16.50RT (WSPART.1075) – – Yes 100 100 – 20.00Brass 71B3 10 IN 605 1.7 – 1 2 57.00 –71B3 12 IN 605 1.9 – 1 2 62.10 –71B26 10 IN 625 1.7 – 1 2 57.00 –71B26 12 IN 625 1.9 – 1 2 62.10 –Zinc 72Z-605E – – – 1 50 2.30 –72Z-609E – – – 1 50 2.30 –72Z-613E – – – 1 50 2.30 –72Z-619E – – – 1 50 2.30 –72Z-625E – – – 1 50 2.30 –72Z-W – – – 1 50 2.30 –See page 27Zinc 73Z-605E – – – 1 25 4.50 –73Z-613E – – – 1 25 4.50 –73Z-619E – – – 1 25 4.50 –73Z-625E – – – 1 25 4.50 –HINGESCONTINUOUSHINGESPIVOTSNumerical1-05990Side Window LockAluminum SP90A3 666 45.0 Yes 25 25 – 92.50Numerical59-437CS115Crash StopHB159Handrail BracketSteel CS115 US10B 20 1/2 IN 613 5.0 – 1 5 40.10 –CS115 US10B 25 1/2 IN 613 5.5 – 1 5 42.70 –CS115 US10B 30 1/2 IN 613 6.0 – 1 5 47.40 –CS115 US26D 20 1/2 IN 626 5.0 – 1 5 40.10 –CS115 US26D 25 1/2 IN 626 5.5 – 1 5 42.70 –CS115 US26D 30 1/2 IN 626 6.0 – 1 5 47.40 –Aluminum HB159 US3AL 666 3.8 – 1 5 13.70 –HB159 US27 673 3.8 – 1 5 13.70 –Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1337
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340MODEL SUBSTRATE MODEL NUMBER218*Finger Pull221Flush Pull222Flush Pull223Flush Pull227Flush Pull230Door Edge Pull* NOTE: 218 Finger Pull priced at 4 per bag. Qty of 10 = 40 pieces.BHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGEBrass 218B3 605 1.6 Yes 4 40 – $ 8.40218B5 609 1.6 Yes 4 40 – 16.00218B10 612 1.6 Yes 4 40 – 16.00218B10B 613 1.6 Yes 4 40 – 16.00218B15 619 1.6 Yes 4 40 – 8.40218B26 625 1.6 Yes 4 40 – 11.20218B26D 626 1.6 Yes 4 40 – 11.20Brass 221B3 605 1.0 – 1 20 3.10 –221B4 606 1.0 – 1 20 3.10 –221B5 609 1.0 – 1 20 3.10 –221B10 612 1.0 – 1 20 4.00 –221B10B 613 1.0 – 1 20 3.60 –221B15 619 1.0 – 1 20 3.40 –221B26 625 1.0 – 1 20 3.60 –221B26D 626 1.0 – 1 20 3.60 –SPS221B-605 605 – – 25 25 – 77.50SPS221B-609 609 – – 25 25 – 100.00SPS221B-619 619 – – 25 25 – 100.00SPS221B-620 620 – – 25 25 – 100.00SPS221B-716 – – – 25 25 – 100.00Brass 222B3 605 1.5 – 1 10 17.60 –222B4 606 1.5 – 1 10 17.60 –222B5 609 1.5 – 1 10 20.20 –222B10 612 1.5 – 1 10 20.20 –222B10B 613 1.5 – 1 10 20.20 –222B15 619 1.5 – 1 10 19.40 –222B26 625 1.5 – 1 10 20.20 –222B26D 626 1.5 – 1 10 20.20 –Brass 223B3 605 0.7 – 1 10 5.40 –223B4 606 0.7 – 1 10 5.40 –223B10 612 0.7 – 1 10 6.10 –223B10B 613 0.7 – 1 10 6.10 –223B15 619 0.7 – 1 10 5.80 –223B26 625 0.7 – 1 10 6.10 –223B26D 626 0.7 – 1 10 6.10 –Brass 227B3 605 1.0 – 1 10 8.10 –227B4 606 1.0 – 1 10 8.10 –227B5 609 1.0 – 1 10 8.90 –227B10 612 1.0 – 1 10 9.40 –227B10B 613 1.0 – 1 10 9.40 –227B15 619 1.0 – 1 10 8.90 –227B26 625 1.0 – 1 10 9.40 –227B26D 626 1.0 – 1 10 9.40 –Brass 230B3 605 1.3 – 1 10 11.30 –230B4 606 1.3 – 1 10 11.30 –230B5 609 1.3 – 1 10 12.50 –230B10 612 1.3 – 1 10 11.30 –230B10B 613 1.3 – 1 10 13.10 –230B15 619 1.3 – 1 10 12.50 –230B26 625 1.3 – 1 10 13.10 –230B26D 626 1.3 – 1 10 13.10 –Bold pricing indicates item is in stock and available for Fast Track38<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL SUBSTRATE MODEL NUMBER253Deluxe Surface Bolt253Mortise StrikePackage253Angle StrikePackage261Manual Flush Bolt262Manual Flush Bolt262Strike Package265Manual Flush Bolt265Strike Package325Magnetic Catch326Heavy Duty Magnetic Catch327Magnetic CatchDual Triple Pole330Double Roller Catch335Roller CatchAdjustable335Strike & Mounting Package336Roller CatchAdjustable336Strike & Mounting PackageBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEBrass 253B3 8 IN US MS 605 – – 1 5 56.30 –253B10B 8 IN US MS 613 – – 1 5 64.70 –253B26D 8 IN US MS 626 – – 1 5 64.70 –253B3 12 IN US MS 605 – – 1 5 74.00 –253B10B 12 IN US MS 613 – – 1 5 79.10 –253B26D 12 IN US MS 626 – – 1 5 79.10 –Brass 09-22-605 605 – – 1 1 7.00 –09-22-613 613 – – 1 1 7.00 –09-22-626 626 – – 1 1 7.00 –Brass 09-33-605 605 – – 1 1 15.70 –09-33-613 613 – – 1 1 15.70 –09-33-626 626 – – 1 1 15.70 –Brass 261B3 605 2.4 – 1 10 16.50 –261B5 609 2.4 – 1 10 18.10 –261B10B 613 2.4 – 1 10 20.80 –261B15 619 2.4 – 1 10 18.80 –261B26 625 2.4 – 1 10 18.80 –261B26D 626 2.4 – 1 10 18.80 –SP261B3 605 3.8 – 1 15 – 247.50SP261B15 619 0.0 – 1 15 – 282.00Brass 262B3 605 3.6 – 1 10 23.90 –262B5 606 3.6 – 1 10 26.40 –262B10B 613 3.6 – 1 10 27.70 –262B15 619 3.6 – 1 10 27.70 –262B26 625 3.6 – 1 10 27.70 –262B26D 626 3.6 – 1 10 27.70 –09-40-605 605 – – 1 1 4.20 –09-40-613 613 – – 1 1 4.20 –09-40-626 626 – – 1 1 4.20 –Brass 265B3 605 2.1 – 1 10 18.70 –265B5 609 2.1 – 1 10 20.60 –265B10B 613 2.1 – 1 10 21.60 –265B15 619 2.1 – 1 10 21.60 –265B26 625 2.1 – 1 10 21.60 –265B26D 626 2.1 – 1 10 21.60 –09-40-605 605 – – 1 1 4.20 –09-40-613 613 – – 1 1 4.20 –09-40-626 626 – – 1 1 4.20 –Aluminum 325A3 666 1.9 – 1 20 2.50 –325A92 673 1.9 – 1 20 2.50 –Aluminum 326A3 666 3.0 – 1 10 6.90 –326A92 673 3.0 – 1 10 6.90 –Aluminum 327A3 666 4.0 – 1 10 11.80 –327A92 673 4.0 – 1 10 11.80 –Steel 330F2C 604 1.1 – 1 30 1.50 –SP330F2C 604 2.3 – 1 50 – 75.00Brass 335B3 605 1.6 – 1 10 11.80 –335B5 609 1.6 – 1 10 14.10 –335B10 612 1.6 – 1 10 14.10 –335B10B 613 1.6 – 1 10 14.10 –335B15 619 1.6 – 1 10 14.70 –335B26 625 1.6 – 1 10 14.10 –335B26D 626 1.6 – 1 10 14.10 –09-45-613 613 – – 1 1 5.30 –09-45-619 619 – – 1 1 5.30 –Brass 336B3 605 1.6 – 1 10 10.80 –336B4 606 1.6 – 1 10 14.10 –336B5 609 1.6 – 1 10 14.10 –336B10 612 1.6 – 1 10 14.10 –336B10B 613 1.6 – 1 10 14.10 –336B15 619 1.6 – 1 10 14.10 –336B26 625 1.6 – 1 10 14.10 –336B26D 626 1.6 – 1 10 13.10 –09-47-605 605 – – 1 1 5.70 –09-47-613 613 – – 1 1 5.70 –HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1339
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340MODEL SUBSTRATE MODEL NUMBER345Ball Catch347Ball Catch347Strike & MountingPackage349Ball Catch349Strike & MountingPackageFB358Manual Flush BoltWood DoorUL 90 MinutesSB360Surface Bolt Heavy DutyUL ListedSB360 - MS Strike PackageSB360 - SNB PackageWS401-CVX(401)Wall Bumperw/Plastic AnchorConvex RubberWS401-CCV(401 1/2)Wall Bumperw/Plastic AnchorConcave RubberWS402-CVX(402)Wall Bumperw/Drywall AnchorConvex RubberBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGEBrass 345B3 605 0.8 – 1 10 $ 6.90 –345B5 609 0.8 – 1 10 7.60 –345B10 612 0.8 – 1 10 7.90 –345B10B 613 0.8 – 1 10 7.90 –345B15 619 0.8 – 1 10 8.20 –345B26 625 0.8 – 1 10 7.90 –345B26D 626 0.8 – 1 10 7.90 –Brass 347B3 605 1.9 – 1 10 10.20 –347B4 606 1.9 – 1 10 10.20 –347B5 609 1.9 – 1 10 11.10 –347B10 612 1.9 – 1 10 11.60 –347B10B 613 1.9 – 1 10 11.60 –347B15 619 1.9 – 1 10 11.10 –347B26 625 1.9 – 1 10 11.60 –347B26D 626 1.9 – 1 10 11.60 –09-53-605 605 – – 1 10 5.30 –09-53-613 613 – – 1 10 5.30 –09-53-619 619 – – 1 10 5.30 –09-53-625 625 – – 1 10 5.30 –09-53-626 626 – – 1 10 5.30 –Brass 349B3 605 1.8 – 1 10 10.20 –349B4 606 1.8 – 1 10 10.20 –349B5 609 1.8 – 1 10 12.20 –349B10 612 1.8 – 1 10 12.20 –349B10B 613 1.8 – 1 10 12.20 –349B15 619 1.8 – 1 10 12.60 –349B26 625 1.8 – 1 10 12.20 –349B26D 626 1.8 – 1 10 12.20 –349B-716 – 1.8 – 1 10 12.20 –09-61-605 – – – 1 1 5.30 –09-61-613 – – – 1 1 5.30 –09-61-626 – – – 1 1 5.30 –Brass FB358 US3 605 1.7 – 1 2 30.80 –FB358 US4 606 1.7 – 1 2 30.80 –FB358 US10 612 1.7 – 1 2 30.80 –FB358 US10B 613 1.7 – 1 2 30.80 –FB358 US15 619 1.8 – 1 5 30.80 –FB358 US26 625 1.7 – 1 2 30.80 –FB358 US26D 626 1.7 – 1 2 30.80 –Steel SB360 US2C 12 IN 604 3.5 – 1 1 96.90 –09-82-604 604 – – 1 1 20.00 –09-350-604 604 – – 1 1 16.40 –Brass WS401CVX US3 605 2.9 – 1 10 13.10 –WS401CVX US4 606 2.9 – 1 10 15.80 –WS401CVX US10 612 2.9 – 1 10 15.80 –WS401CVX US10B 613 2.9 – 1 10 15.80 –WS401CVX US15 619 2.9 – 1 10 16.30 –WS401CVX US26 625 2.9 – 1 10 15.80 –WS401CVX US26D 626 2.9 – 1 10 15.80 –Brass WS401CCV US3 605 3.1 – 1 10 13.10 –WS401CCV US4 606 3.1 – 1 10 15.80 –WS401CCV US10 612 3.1 – 1 10 15.80 –WS401CCV US10B 613 3.1 – 1 10 15.80 –WS401CCV US15 619 3.1 – 1 10 16.30 –WS401CCV US26 625 3.1 – 1 10 15.80 –WS401CCV US26D 626 3.1 – 1 10 15.80 –Brass WS402CVX US3 605 2.9 – 1 10 14.30 –WS402CVX US4 606 2.9 – 1 10 17.20 –WS402CVX US10 612 2.9 – 1 10 17.20 –WS402CVX US10B 613 2.9 – 1 10 17.20 –WS402CVX US15 619 2.9 – 1 10 17.80 –WS402CVX US26 625 2.9 – 1 10 17.20 –WS402CVX US26D 626 2.9 – 1 10 17.20 –Bold pricing indicates item is in stock and available for Fast Track40<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL SUBSTRATE MODEL NUMBERWS402-CCV(402 1/2)Wall Bumperw/Drywall AnchorConcave RubberWS404Small Wall StopConvex Rubber1” Base Diameter405Coat and Hat HookWS406-CVX(406)Wall Stopw/Plastic AnchorConvex RubberWS406-CCV(406 1/2)Wall Stopw/Plastic AnchorConcave RubberWS407-CVX(407)Wall Stopw/Drywall AnchorConvex RubberBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEBrass WS402CCV US3 605 3.1 – 1 10 $ 14.30 –WS402CCV US4 606 3.1 – 1 10 17.20 –WS402CCV US10 612 3.1 – 1 10 17.20 –WS402CCV US10B 613 3.1 – 1 10 17.20 –WS402CCV US15 619 3.1 – 1 10 17.80 –WS402CCV US26 625 3.1 – 1 10 17.20 –WS402CCV US26D 626 3.1 – 1 10 17.20 –Brass WS404 US3 605 1.0 – 1 20 5.00 –WS404 US4 606 1.0 – 1 20 5.90 –WS404 US5 609 1.0 – 1 20 5.90 –WS404 US10 612 1.0 – 1 20 5.90 –WS404 US10B 613 1.0 – 1 20 5.90 –WS404 US15 619 1.0 – 1 20 6.20 –WS404 US26 625 1.0 – 1 20 5.90 –WS404 US26D 626 1.0 – 1 20 5.90 –Aluminum 405A3 666 1.5 – 1 20 2.20 –405A4 667 1.5 – 1 20 2.20 –405A5 – 1.5 – 1 20 2.20 –405A10 668 1.5 – 1 20 2.20 –405A10B 703 1.5 – 1 20 2.20 –405A14 667 1.5 – 1 20 2.20 –405A92 673 1.5 – 1 20 2.20 –Brass WS406CVX US3 605 1.8 – 1 10 3.50 –WS406CVX US4 606 1.8 – 1 10 3.50 –WS406CVX US10 612 1.8 – 1 10 3.90 –WS406CVX US10B 613 1.8 – 1 10 3.90 –WS406CVX US15 619 1.8 – 1 10 3.90 –WS406CVX US26 625 1.8 – 1 10 3.50 –WS406CVX US26D 626 1.8 – 1 10 3.90 –Stainless WS406US32D 630 1.8 – 1 10 2.80 –Brass WS406CCV US3 605 2.0 – 1 10 3.50 –WS406CCV US4 606 2.0 – 1 10 3.50 –WS406CCV US10 612 2.0 – 1 10 3.90 –WS406CCV US10B 613 2.0 – 1 10 3.90 –WS406CCV US15 619 2.0 – 1 10 3.90 –WS406CCV US26 625 2.0 – 1 10 3.90 –WS406CCV US26D 626 2.0 – 1 10 3.50 –Stainless WS406CCV US32D 630 2.0 – 1 10 2.80 –Brass WS407CVX US3 605 1.8 – 1 10 3.50 –WS407CVX US4 606 1.8 – 1 10 3.50 –WS407CVX US10 612 1.8 – 1 10 3.90 –WS407CVX US10B 613 1.8 – 1 10 3.90 –WS407CVX US15 619 1.8 – 1 10 3.90 –WS407CVX US26 625 1.8 – 1 10 3.90 –WS407CVX US26D 626 1.8 – 1 10 3.50 –SPS407CVX B-605 605 – – 15 15 – 54.00SPS407CVX B-609 609 – – 15 15 – 60.00SPS407CVX B-619 619 – – 15 15 – 60.00SPS407CVX B-620 620 – – 15 15 – 60.00SPS407CVX B-716 716 – – 15 15 – 60.00Stainless WS407CVX US32D 630 1.8 – 1 10 2.80 –HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1341
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340MODEL SUBSTRATE MODEL NUMBERWS407-CCV(407 1/2)Wall Stopw/Drywall AnchorConcave RubberFS410Universal Floor Dome Stop411Wall Stop Adhesive Back430Floor Door Stop430Rubber TipFS434Angle Door StopFS434 Rubber TipR435RiserFor 436 Door StopFS436Floor Dome Stop1” HeightR437RiserFor 438 Door StopBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGEBrass WS407CCV US3 605 2.0 – 1 10 $ 3.50 –WS407CCV US4 606 2.0 – 1 10 3.50 –WS407CCV US5 609 2.0 – 1 10 3.50 –WS407CCV US10 612 2.0 – 1 10 3.90 –WS407CCV US10B 613 2.0 – 1 10 3.90 –WS407CCV US15 619 2.0 – 1 10 3.90 –WS407CCV US26 625 2.0 – 1 10 3.90 –WS407CCV US26D 626 2.0 – 1 10 3.50 –Stainless WS407CCV US32D 630 2.0 – 1 10 2.80 –FS410 US3 605 3 1 23.30 –FS410 US26D 626 3 1 19.90 –Rubber 411R-W – 1.1 – 1 20 2.50 –Aluminum SP430A3 666 1.9 – 25 25 – 57.50SP430A5 – 1.9 – 25 25 – 60.00SP430A14 669 1.9 – 25 25 – 60.00SP430A92 673 1.9 – 25 25 – 57.50Brass 430 US3 605 1.8 – 1 10 13.10 –430 US4 606 1.8 – 1 10 12.10 –430 US5 609 1.8 – 1 10 15.50 –430 US10B 613 1.8 – 1 10 15.50 –430 US15 619 1.8 – 1 10 16.30 –430 US26 625 1.8 – 1 10 15.50 –430 US26D 626 1.8 – 1 10 15.50 –RubberRT (WSPART.1075) – – – 100 100 – 20.00SteelFS434 US2C 604 4.0 – 1 10 7.70 –09-318 – – – 1 1 3.40 –Aluminum R435 1/4 IN – 2.1 – 1 20 5.50 –R435 3/8 IN – 2.6 – 1 20 5.50 –R435 1/2 IN – 2.9 – 1 20 5.50 –R435 5/8 IN – 3.3 – 1 20 5.50 –R435 3/4 IN – 3.2 – 1 20 5.50 –R435 7/8 IN – 3.2 – 1 20 5.50 –R435 1 IN – 3.1 – 1 20 5.50 –Brass FS436 US3 605 2.2 – 1 10 5.70 –FS436 US4 606 2.2 – 1 10 5.70 –FS436 US5 609 2.2 – 1 10 5.70 –FS436 US10 612 2.2 – 1 10 6.60 –FS436 US10B 613 2.2 – 1 10 6.60 –FS436 US15 619 2.2 – 1 10 6.60 –FS436 US26 625 2.2 – 1 10 5.90 –FS436 US26D 626 2.2 – 1 10 4.80 –FS436 B-716 – 2.2 – 1 10 6.50 –SPFS436US26D 626 2.5 – 10 10 – 48.00SPSFS436B-605 605 – – 15 15 – 87.00SPSFS436B-609 609 – – 15 15 – 87.00SPSFS436B-619 619 – – 15 15 – 100.50SPSFS436B-620 620 – – 15 15 – 100.50SPSFS436B-716 – – – 15 15 – 100.50Aluminum FS436 US28 628 – – 1 10 4.30 –SPFS436US28 628 – – 15 15 – 65.40Aluminum R437 1/4 IN – 2.0 – 1 10 5.80 –R437 3/8 IN – 2.0 – 1 10 5.80 –R437 1/2 IN – 2.0 – 1 10 5.80 –R437 5/8 IN – 2.0 – 1 10 5.80 –R437 3/4 IN – 2.2 – 1 10 5.80 –R437 1 IN – 2.3 – 1 10 5.80 –Bold pricing indicates item is in stock and available for Fast Track42<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL SUBSTRATE MODEL NUMBERFS438Floor Dome Stop1 3/8” HeightBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEBrass FS438 US3 605 2.70 – 1 10 $6.70 –FS438 US4 606 2.70 – 1 10 6.70 –FS438 US5 609 2.70 – 1 10 6.70 –FS438 US10 612 2.70 – 1 10 7.70 –FS438 US10B 613 2.70 – 1 10 7.70 –FS438 US15 619 2.70 – 1 10 9.80 –FS438 US26 625 2.70 – 1 10 7.20 –FS438 US26D 626 2.70 – 1 10 5.40 –Aluminum FS438 US28 628 1.60 – 1 10 5.30 –FS439 FS439 US3 677 2.2 1 10.00FS439 US4 678 2.2 1 10.00FS439 US10B 704 2.2 1 10.60FS441Floor StopNow furnished with woodand masonry fastenersFS439 US 26D 682 2.2 1 8.80FS439 US32D 630 2.2 1 14.50Brass FS441 US3 605 1.10 – 1 2 19.90 –FS441 US4 606 1.10 – 1 2 22.50 –FS441 US5 609 1.10 – 1 2 21.20 –FS441 US10 612 1.10 – 1 2 22.50 –FS441 US10B 613 1.10 – 1 2 21.20 –FS441 US15 619 1.10 – 1 2 27.20 –FS441 US26 625 1.10 – 1 2 27.20 –FS441 US26D 626 1.10 – 1 2 19.20 –FS441 Rubber Tip 09-315 – – – 1 1 1.80 –WS443Wall Door Stopfor Masonry MountingBrass WS443 US3 605 1.50 – 1 2 30.70 –WS443 US4 606 1.50 – 1 2 38.30 –WS443 US10 612 1.50 – 1 2 36.90 –WS443 US10B 613 1.50 – 1 2 36.90 –WS443 US15 619 1.50 – 1 2 38.30 –WS443 US26 625 1.50 – 1 2 36.90 –WS443 US26D 626 1.50 – 1 2 36.90 –WS443 Rubber Tip 09-316 – – – 1 1 1.80 –FS444Floor Stopfor Masonry MountingBrass FS444 US3 605 2.00 – 1 2 23.40 –FS444 US4 606 2.00 – 1 2 23.40 –FS444 US10 612 2.00 – 1 2 23.40 –FS444 US10B 613 2.00 – 1 2 27.60 –FS444 US15 619 2.00 – 1 2 29.90 –FS444 US26 625 2.00 – 1 2 23.40 –FS444 US26D 626 2.00 – 1 2 22.50 –FS444 Rubber Tip 09-316 – – – 1 1 1.80 –WS445Wall Door Stopw/Heavy Duty Holderfor Masonry MountingBrass WS445 US3 605 1.90 – 1 2 48.70 –WS445 US4 606 1.90 – 1 2 58.40 –WS445 US10 612 1.90 – 1 2 58.40 –WS445 US10B 613 1.90 – 1 2 58.40 –WS445 US15 619 1.90 – 1 2 60.70 –WS445 US26 625 1.90 – 1 2 58.40 –WS445 US26D 626 1.90 – 1 2 58.40 –WS445 Rubber Tip 09-316 – – – 1 1 1.80 –FS446Floor Stopw/Heavy Duty Holderfor Masonry MountingBrass FS446 US3 605 2.40 – 1 2 46.40 –FS446 US4 606 2.40 – 1 2 46.40 –FS446 US10 612 2.40 – 1 2 46.40 –FS446 US10B 613 2.40 – 1 2 41.20 –FS446 US15 619 2.40 – 1 2 43.00 –FS446 US26 625 2.40 – 1 2 46.40 –FS446 US26D 626 2.40 – 1 2 33.00 –Aluminum FS446 US28 628 1.30 – 1 2 23.70 –FS446 Rubber Tip 09-316 – – – 1 1 1.80 –Bold pricing indicates item is in stock and available for Fast TrackHINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1343
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340MODEL SUBSTRATE MODEL NUMBERWS447Heavy DutyWall Door Stopfor Drywall MountingWS447 Rubber TipFS448Floor Door StopHeavy Dutyfor Wood MountingFS448 Rubber TipWS449Wall Door Stopw/Heavy Duty Holderfor Drywall MountingWS449 Rubber TipFS450Floor Door Stopw/Heavy Duty Holderfor Wood MountingFS450 Rubber TipFS452Kick Down Door Holder4”FS452 Rubber TipsFS452Kick Down Door Holder5”FS452 Rubber TipsSB453Surface BoltULListed8”BHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGEBrass WS447 US3 605 1.30 – 1 2 $ 27.90 –WS447 US4 606 1.30 – 1 2 33.50 –WS447 US10 612 1.30 – 1 2 33.50 –WS447 US10B 613 1.30 – 1 2 33.50 –WS447 US15 619 1.30 – 1 2 34.80 –WS447 US26 625 1.30 – 1 2 33.50 –WS447 US26D 626 1.30 – 1 2 33.50 –09-316 – – – 1 1 1.80 –Brass FS448 US3 605 1.90 – 1 2 26.30 –FS448 US4 606 1.90 – 1 2 26.30 –FS448 US5 609 1.90 – 1 2 30.50 –FS448 US10 612 1.90 – 1 2 26.30 –FS448 US10B 613 1.90 – 1 2 25.40 –FS448 US15 619 1.90 – 1 2 33.00 –FS448 US26 625 1.90 – 1 2 33.00 –FS448 US26D 626 1.90 – 1 2 26.30 –Aluminum FS448 US28 628 0.80 – 1 2 19.30 –09-316 – – – 1 1 1.80 –Brass WS449 US3 605 1.60 – 1 2 46.50 –WS449 US4 606 1.60 – 1 2 55.70 –WS449 US10 612 1.60 – 1 2 55.70 –WS449 US10B 613 1.60 – 1 2 55.70 –WS449 US15 619 1.60 – 1 2 57.90 –WS449 US26 625 1.60 – 1 2 55.70 –WS449 US26D 626 1.60 – 1 2 55.70 –Aluminum WS449 US28 628 0.90 – 1 2 38.90 –09-316 – – – 1 1 1.80 –Brass FS450 US3 605 2.20 – 1 2 49.30 –FS450 US4 606 2.20 – 1 2 49.30 –FS450 US10 612 2.20 – 1 2 49.30 –FS450 US10B 613 2.20 – 1 2 49.30 –FS450 US15 619 2.20 – 1 2 52.40 –FS450 US26 625 2.20 – 1 2 49.30 –FS450 US26D 626 2.20 – 1 2 35.90 –Aluminum FS450 US28 628 1.10 – 1 2 26.70 –09-316 – – – 1 1 1.80 –Brass FS452-4 US3 605 5.00 – 1 10 25.40 –FS452-4 US4 606 5.00 – 1 10 25.40 –FS452-4 US10 612 5.00 – 1 10 25.40 –FS452-4 US10B 613 5.00 – 1 10 26.90 –FS452-4 US15 619 5.00 – 1 10 34.70 –FS452-4 US26 625 5.00 – 1 10 37.70 –FS452-4 US26D 626 5.00 – 1 10 24.50 –Aluminum FS452-4 US28 628 2.10 – 1 10 22.20 –HRT (FSPART.1075) – – Yes 100 100 – 100.00Brass FS452-5 US3 605 5.80 – 1 10 35.20 –FS452-5 US4 606 5.80 – 1 10 35.20 –FS452-5 US10 612 5.80 – 1 10 35.20 –FS452-5 US10B 613 5.80 – 1 10 35.20 –FS452-5 US15 619 5.80 – 1 10 39.60 –FS452-5 US26 625 5.80 – 1 10 44.00 –FS452-5 US26D 626 5.80 – 1 10 30.30 –HRT (FSPART.1075) – – Yes 100 100 – 100.00Steel SB453US2C-8-TB 604 5.40 – 1 5 35.30 –SB453US3-8-TB 632 5.80 – 1 5 35.30 –SB453US4-8-TB 633 5.80 – 1 5 35.30 –SB453US10-8-TB 639 5.40 – 1 5 42.50 –SB453US10B-8-TB 640 5.40 – 1 5 45.70 –SB453US26D-8-TB 652 5.40 – 1 5 43.60 –Bold pricing indicates item is in stock and available for Fast Track44<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL SUBSTRATE MODEL NUMBERSB453Surface BoltUL Listed12”SB453 Thrubolt PkgSB453 Sex Bolt PkgFS455Kick DownDoor HolderFS455 Rubber TipsFB457Manual Flush BoltUL 3 HourSingle Metal DoorOptional Rod LengthsAvailable18”, 24”, 36”, 48”5.00 List AddFB457 Bolt TipsFB457 Guide PKGFB458Manual Flush BoltUL 3 HourSingle Metal DoorOptional Rod LengthsAvailable18”, 24”, 36”, 48”5.00 List AddFB458 Bolt TipsFB458 Guide PKGRB470Roller Bumper 2” ReachBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGESteel SB453US2C 12-TB 604 6.60 – 1 5 $ 44.50 –SB453US10 12-TB 639 6.60 – 1 5 47.60 –SB453US10B 12-TB 640 6.60 – 1 5 51.90 –SB453US26D 12-TB 652 6.60 – 1 5 55.00 –09-340-626 626 – – 1 1 6.80 –09-351-604 604 – – 1 1 12.70 –Aluminum FS455-4 US3AL 666 1.90 – 1 10 6.80 –FS455-4 US5AL – 2.00 – 1 10 10.30 –FS455-4 US10AL 668 1.90 – 1 10 6.80 –FS455-4 US27 673 1.90 – 1 10 6.80 –SPFS455-4 US3AL 666 46.50 Yes 15 15 – 102.00SPFS455-4 US5AL – 46.50 Yes 15 15 – 154.50SPFS455-4 US27 673 46.50 Yes 15 15 – 102.00Brass FS455-4 US3 605 4.60 – 1 10 27.60 –FS455-4 US4 606 4.60 – 1 10 27.60 –FS455-4 US5 609 4.60 – 1 10 33.10 –FS455-4 US10 612 4.60 – 1 10 27.60 –FS455-4 US10B 613 4.60 – 1 10 33.10 –FS455-4 US15 619 4.60 – 1 10 34.00 –FS455-4 US26 625 4.60 – 1 10 33.10 –FS455-4 US26D 626 4.60 – 1 10 33.10 –HRT (FSPART.1075) – – Yes 100 100 – 100.00Brass FB457-12 US3 605 2.00 – 1 12 23.00 –FB457-12 US4 606 2.00 – 1 12 23.00 –FB457-12 US10 612 2.00 – 1 12 23.00 –FB457-12 US10B 613 2.00 – 1 12 23.00 –FB457-12 US15 619 2.00 – 1 12 23.00 –FB457-12 US26 625 2.00 – 1 12 23.00 –FB457-12 US26D 626 2.00 – 1 12 23.00 –09-176-604 – – – 1 1 4.00 –09-135 – – – 1 1 1.80 –Brass FB458 US3 12 IN 605 2.00 – 1 12 19.30 –FB458 US4 12 IN 606 2.00 – 1 12 19.30 –FB458 US5 12 IN 609 2.00 – 1 12 19.30 –FB458 US10 12 IN 612 2.00 – 1 12 19.30 –FB458 US10B 12 IN 613 2.00 – 1 12 19.30 –FB458 US15 12 IN 619 2.00 – 1 12 19.30 –FB458 US26 12 IN 625 2.00 – 1 12 19.30 –FB458 US26D 12 IN 626 2.00 – 1 12 18.10 –09-176-604 604 – – 1 1 4.00 –09-135 – – – 1 1 1.80 –Brass RB470 US3 605 0.90 – 1 2 26.40 –RB470 US26 625 0.90 – 1 2 33.10 –RB470 US26D 626 0.90 – 1 2 33.10 –HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021RB470 Large Roller PKGRB471Roller Bumper4-1/2” ProjectionRB472Roller Bumper6” ProjectionRB472 Large Roller PKG09-137-626 626 – – 1 1 4.70 –Brass RB471 US3 605 1.00 – 1 2 24.90 –RB471 US4 606 1.00 – 1 2 29.90 –RB471 US26 625 1.00 – 1 2 29.90 –RB471 US26D 626 1.00 – 1 2 29.90 –Brass RB472 US3 605 1.10 – 1 2 26.50 –RB472 US4 606 1.10 – 1 2 31.60 –RB472 US10 612 1.10 – 1 2 31.60 –RB472 US10B 613 1.10 – 1 2 31.60 –RB472 US15 619 1.10 – 1 2 30.00 –RB472 US26 625 1.10 – 1 2 31.60 –RB472 US26D 626 1.10 – 1 2 31.60 –09-137-626 626 – – 1 1 4.70 –Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1345
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190MODEL SUBSTRATE MODEL NUMBER481Chain Door Guard482Door Guard482 sPlate482 sSHIM 1/8 In482 sSHIM 3/8 InFS495Auto Door Stopand Holder3/8” Max ClearanceFloor to DoorFS496Auto Door Stopand Holder1” Max ClearanceFloor to DoorFS497Auto Door Stopand HolderFS544Kick Down Door Holder4”BHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGEBrass 481B3 605 2.50 – 1 10 $ 9.80 –481B26D 626 2.50 – 1 10 11.30 –Steel 481F3 632 2.30 – 1 10 5.40 –481F4 633 2.30 – 1 10 5.40 –481F5 638 2.30 – 1 10 6.10 –481F10 639 2.30 – 1 10 6.10 –481F15 646 2.30 – 1 10 5.40 –481F26 651 2.30 – 1 10 5.40 –481F26D 652 2.30 – 1 10 5.40 –481F-716 – 11.50 Yes 5 5 – 31.00SC481F3 632 6.00 Yes 5 5 – 31.00SC481F-619 646 6.00 Yes 5 5 – 31.00SC481F-716 – 1.20 – 1 5 6.20 –Aluminum 482A3 666 3.50 – 1 5 8.00 –482A5 – 3.50 – 1 5 8.00 –482A26 672 3.50 – 1 5 9.50 –482A26D 702 3.50 – 1 5 9.50 –Brass 482B3 605 5.00 – 1 5 26.80 –482B4 606 5.00 – 1 5 29.60 –482B10 612 5.00 – 1 5 29.60 –482B10B 613 5.00 – 1 5 29.60 –482B15 619 5.00 – 1 5 40.60 –482B26 625 5.00 – 1 5 29.60 –482B26D 626 5.00 – 1 5 29.60 –09-170-605 605 – – 1 1 5.70 –09-170-613 613 – – 1 1 5.70 –09-170-626 626 – – 1 1 5.70 –09-576-626 626 – – 1 1 13.00 –09-577-626 626 – – 1 1 20.60 –Brass FS495 US3 605 1.80 – 1 1 72.10 –FS495 US4 606 1.80 – 1 1 72.10 –FS495 US10 612 1.80 – 1 1 86.40 –FS495 US10B 613 1.80 – 1 1 86.40 –FS495 US26 625 1.80 – 1 1 86.40 –FS495 US26D 626 1.80 – 1 1 72.10 –Brass FS496 US3 605 1.50 – 1 1 82.30 –FS496 US10 612 1.50 – – 1 82.30 –FS496 US10B 613 1.50 – 1 1 82.30 –FS496 US26 625 1.50 – 1 1 82.30 –FS496 US26D 626 1.50 – 1 1 82.30 –Brass FS497 US3 605 1.40 – 1 1 76.80 –FS497 US10 612 1.40 – 1 1 92.20 –FS497 US10B 613 1.40 – 1 1 92.20 –FS497 US26 625 1.40 – 1 1 92.20 –FS497 US26D 626 1.40 – 1 1 76.80 –Steel FS544 SP4 706 – – 1 – 10.30 –FS544 SP10 691 – – 1 – 10.30 –FS544 SP28 689 – – 1 – 10.30 –FS544 SP313 695 – – 1 – 10.30 –FS544 SPBLK 693 – – 1 – 10.30 –Numerical8200-9340FS555Kick Down Door Holder5”Steel FS555 SP4 706 – – 1 – 10.80 –FS555 SP10 691 – – 1 – 10.80 –FS555 SP28 689 – – 1 – 10.80 –FS555 SP313 695 – – 1 – 10.80 –FS555 SPBLK 693 – – 1 – 10.80 –s Fits brass door guards only.Bold pricing indicates item is in stock and available for Fast Track46<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MUST BEBHMAORDERED IN MULTIPLE PACKEDLIST PRICEMODEL SUBSTRATE MODEL NUMBER FINISH WEIGHT MULTIPLE QTY QTY PER BOX EACH PACKAGE571Coat and Hat HookAluminum 571A3571A5666–1.301.30––112020$ 1.101.50––571A10 668 1.30 – 1 20 1.10 –572Coat and Hat Hook571A14 669 1.30 – 1 20 1.50 –571A15 670 1.30 – 1 20 1.50 –571A92 673 1.30 – 1 20 1.10 –571A-716 – 1.30 – 1 20 2.10 –571A-BLK – 1.40 – 1 20 2.10 –571A-W – 1.40 – 1 20 2.10 –SP571A3 666 47.50 Yes 25 25 – 27.50SP571A5 – 47.50 Yes 25 25 – 37.50SP571A14 669 47.50 Yes 25 25 – 37.50SP571A92 673 47.50 Yes 25 25 – 27.50SP571A-W – 47.50 Yes 25 25 – 52.50Brass 571B3 605 1.50 – – 10 6.90 –571B4 606 1.50 – – 10 8.30 –571B5 609 1.50 – – 10 8.30 –571B10B 613 1.50 – 1 10 8.30 –571B15 619 1.50 – 1 10 8.70 –571B26 625 1.50 – 1 10 8.30 –571B26D 626 1.50 – 1 10 8.30 –571B-716 – 1.50 – 1 10 8.30 –SC571B-605 605 – Yes 5 5 – 37.50SC571B-609 609 – Yes 5 5 – 46.00SC571B-619 619 – Yes 5 5 – 46.00SC571B-620 620 – Yes 5 5 – 46.00SC571B-716 – – Yes 5 5 – 46.00SP571B26 625 24.00 Yes 10 10 – 86.00SPS571B-605 605 – Yes 25 25 – 187.50SPS571B-609 609 – Yes 25 25 – 235.00SPS571B-619 619 – Yes 25 25 – 235.00SPS571B-620 620 – Yes 25 25 – 235.00SPS571B-716 – – Yes 25 25 – 235.00Zinc ** 571Z-619E – 4.70 Yes 25 20 4.10 –Aluminum 572A3 666 1.90 – 1 20 3.40 –572A5 – 1.90 – 1 20 3.60 –572A10 668 1.90 – 1 20 3.60 –572A10B 703 0.00 – 1 20 3.60 –572A14 669 1.90 – 1 20 3.60 –572A15 670 1.90 – 1 20 3.60 –572A92 673 1.90 – 1 20 3.40 –Brass 572B3 605 1.10 – 1 10 9.50 –572B4 606 1.10 – 1 10 9.50 –572B5 609 1.10 – 1 10 11.90 –572B10 612 1.10 – 1 10 9.50 –572B10B 613 1.10 – 1 10 11.40 –572B15 619 1.10 – 1 10 11.90 –572B26 625 1.10 – 1 10 11.40 –572B26D 626 1.10 – 1 10 11.40 –HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340** Zinc substrate, narrow baseBold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1347
HINGESCONTINUOUSHINGESMODEL SUBSTRATE MODEL NUMBER574Coat and Hat Hook575Coat and Hat HookBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGEAluminum 574A3 666 1.60 – 1 10 $ 6.80 –574A26 672 1.60 – 1 10 6.80 –574A92 673 0.00 – 1 10 6.80 –Brass 574B3 605 4.10 – 1 10 23.60 –574B4 606 0.00 – 1 10 23.60 –574B10 612 0.00 – 1 10 28.30 –574B10B 613 4.10 – 1 10 28.30 –574B15 619 0.00 – 1 10 31.10 –574B26 625 4.10 – 1 10 28.30 –574B26D 626 4.10 – 1 10 28.30 –Aluminum 575A3 666 1.40 – 1 10 4.10 –575A10B 703 1.40 – 1 10 4.60 –575A92 673 1.40 – 1 10 4.10 –PIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340580Ceiling Hook581Wardrobe HookContinued on next page.Aluminum 580A3 666 1.80 – 1 20 2.40 –580A5 – 0.00 – 1 20 2.60 –580A10 668 1.80 – 1 20 2.60 –580A14 669 1.80 – 1 20 2.60 –580A15 670 0.00 – 1 20 2.60 –580A92 673 1.80 – 1 20 2.40 –580A716 – 0.00 – 1 20 2.60 –SP580A14 669 60.00 Yes 25 25 – 65.00SP580A3 666 60.00 Yes 25 25 – 60.00SP580A92 673 60.00 Yes 25 25 – 60.00Aluminum 581A3 666 0.90 – 1 20 1.30 –581A5 – 0.90 – 1 20 1.50 –581A14 669 0.80 – 1 20 1.50 –581A15 670 0.90 – 1 20 1.50 –581A92 673 0.90 – 1 20 1.30 –581A-716 – 0.90 – 1 20 1.50 –581A-BLK – 0.90 – 1 20 2.00 –581A-W – 0.90 – 1 20 2.00 –SP581A3 666 120.00 Yes 50 50 – 65.00SP581A5 – 120.00 Yes 50 50 – 75.00SP581A14 669 120.00 Yes 50 50 – 75.00SP581A92 673 2.40 – 50 50 – 65.00Brass 581B3 605 0.80 – 1 10 4.70 –581B4 606 0.00 – 1 10 5.00 –581B5 609 0.80 – 1 10 5.60 –581B10 612 0.00 – 1 10 5.70 –581B10B 613 0.80 – 1 10 5.60 –581B15 619 0.80 – 1 10 5.80 –581B26 625 0.80 – 1 10 5.60 –581B26D 626 0.80 – 1 10 5.60 –581B-716 – – – 1 10 5.80 –SC581B-605 605 – Yes 5 5 – 26.00SC581B-609 609 – Yes 5 5 – 32.00SC581B-619 619 – Yes 5 5 – 32.00SC581B-620 620 – Yes 5 5 – 32.00SC581B-716 – – Yes 5 5 – 32.00Bold pricing indicates item is in stock and available for Fast Track48<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL SUBSTRATE MODEL NUMBER581Wardrobe HookContinued from previous page.582Wardrobe Hook585/586Closet Pole SocketBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEBrass SP581B26 625 27.00 Yes 10 10 – 56.00SPS581B-605 605 – Yes 25 25 – 130.00SPS581B-609 609 – Yes 25 25 – 160.00SPS581B-619 619 – Yes 25 25 – 160.00SPS581B-620 620 – Yes 25 25 – 160.00SPS581B-716 – – Yes 25 25 – 160.00Zinc** 581Z-619E – 2.60 – 1 20 4.10 –Aluminum 582A3 666 1.00 – 1 20 1.50 –582A5 – 1.00 – 1 20 1.60 –582A10 668 1.00 – 1 20 1.60 –582A14 669 1.00 – 1 20 1.60 –582A15 670 1.00 – 1 20 1.60 –582A92 673 1.00 – 1 20 1.50 –582A-716 – 1.00 – 1 20 1.60 –582A-BLK – 1.00 – 1 20 2.20 –582A-W – 1.00 – 1 20 2.20 –SP582A3 666 42.50 Yes 25 25 – 37.50SP582A5 – 42.50 Yes 25 25 – 40.00SP582A14 668 42.50 Yes 25 25 – 40.00SP582A92 673 42.50 Yes 25 25 – 37.50SP582A-W – 35.00 Yes 25 25 – 55.00Brass 582B3 605 1.20 – 1 10 6.20 –582B4 606 1.20 – 1 10 6.90 –582B5 609 1.20 – 1 10 6.90 –582B10 612 1.20 – 1 10 7.50 –582B10B 613 1.20 – 1 10 7.50 –582B15 619 1.20 – 1 10 7.80 –582B26 625 1.20 – 1 10 7.50 –582B26D 626 1.20 – 1 10 7.50 –582B-716 – 1.20 – 1 10 7.80 –SC582B-605 605 – Yes 5 5 – 32.50SC582B-609 609 – Yes 5 5 – 40.50SC582B-619 619 – Yes 5 5 – 40.50SC582B-620 620 – Yes 5 5 – 40.50SC582B-716 – – Yes 5 5 – 40.50SP582B26 625 12.00 Yes 10 10 – 78.00SPS582B-605 605 – Yes 25 25 – 162.50SPS582B-609 609 – Yes 25 25 – 202.50SPS582B-619 619 – Yes 25 25 – 202.50SPS582B-620 620 – Yes 25 25 – 202.50SPS582B-716 – – Yes 25 25 – 202.50Zinc ** 582Z-619E – 4.70 – 1 20 4.10 –Steel SP585F3 632 50.00 Yes 25 25 – 32.50Plastic SP586P – 32.00 Yes 20 20 – 20.00HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190601Mail Slot SleeveBrass 601 1 3/4 IN 630 0.40 – 1 1 16.00 –SC601 630 0.70 – 1 1 16.50 –Numerical8200-9340Zinc substrate, narrow base**Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1349
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340MODEL SUBSTRATE MODEL NUMBER620Letter Box PlateMagazine Open Back PlateSpring-Loaded Front Plate620Sex Bolt PKGSTK685Double Acting StrikeCustom MadeSpecify Jamb widthwhen orderingSTK685LDouble Acting Strike,Custom MadeSpecify Dimple Location andJamb Width when orderingU696Door Viewer, 150°UL Listed 90 Min698Door Viewer, 190°For Doors 1-3/8" to2-1/8"U = UL Listed 90 MinP = Plastic Lens700Door Viewer, 120°For Doors 1-3/8” to 2-1/16"U =UL Listed90 Min700Trim Washer701Door Viewer, 120°For Doors 2-1/8" to 2-5/8"U =UL Listed90 MinVR810DT/VR814DTVandal Resistant TrimUse w/Monarch XX, 18and 25 Series Exit DevicesVR810NL/VR814NLVandal Resistant TrimUse w/Monarch XX, and18 Series Rim Exit DevicesVR810NL-V/VR814NL-VVandal Resistant TrimUse w/Monarch XX-V, 18-Vand All 25 Series Exit DevicesAS895Applied StopBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKED PERLIST PRICEBOX EACH PACKAGEBrass 620B3 605 1.50 – 1 1 $ 65.50 –620B5 609 1.50 – 1 1 80.80 –620B15 619 1.50 – 1 1 78.50 –620B26 625 1.50 – 1 1 78.50 –620B26D 626 1.50 – 1 1 78.50 –620B-716 – 3.30 – 1 1 78.50 –SC620B3 605 6.60 Yes 2 2 – 135.10SC620B5 609 6.60 Yes 2 2 – 166.30SC620B-619 619 6.60 Yes 2 2 – 165.90SC620B-620 620 6.60 Yes 2 2 – 165.90SC620B-716 – 6.60 Yes 2 2 – 165.90Aluminum 620PA28 628 0.60 – 1 1 40.90 –09-355-605 605 – – 1 1 8.90 –09-355-613 613 – – 1 1 10.90 –09-355-626 626 – – 1 1 10.90 –Brass STK685 US3 605 – – 1 – 230.90 –STK685 US4 606 – – 1 – 230.90 –STK685 US10 612 – – 1 – 230.90 –STK685 US10B 613 – – 1 – 230.90 –STK685 US26 625 – – 1 – 230.90 –STK685 US26D 626 – – 1 – 230.90 –Brass STK685L US3 605 – – 1 – 230.90 –STK685L US4 606 – – 1 – 230.90 –STK685L US10 612 – – 1 – 230.90 –STK685L US10B 613 – – 1 – 230.90 –STK685L US26 625 – – 1 – 230.90 –STK685L US26D 626 – – 1 – 230.90 –Brass U696B4 606 0.50 – 1 10 13.70 –U696B10B 613 0.50 – 1 10 13.70 –U696B26D 626 0.50 – 1 10 13.70 –Brass 698B3 605 0.80 – 1 10 16.10 –698B26D 626 0.80 – 1 10 16.10 –698P-B716 – 0.80 – 1 10 16.10 –U698B3 605 0.80 – 1 10 19.20 –U698B26D 626 0.80 – 1 10 19.20 –SC698P-B605 605 – Yes 5 5 – 83.00SC698P-B619 619 – Yes 5 5 – 92.50SC698P-B716 – – Yes 5 5 – 92.50Brass 700B4 606 0.50 1 10 6.80 –700B26D 626 0.50 1 10 6.80 –SC700P-B605 605 2.50 Yes 5 5 – 35.00U700B4 606 0.50 – 1 10 9.40 –U700B10B 613 0.50 – 1 10 9.40 –U700B26D 626 0.50 – 1 10 9.40 –09-241-606 606 – – 1 1 0.30 –09-241-613 613 – – 1 1 0.30 –09-241-626 626 – – 1 1 0.30 –Brass 701B4 606 0.80 – 1 10 7.60 –701B10B 613 0.80 – 1 10 7.60 –701B26D 626 0.80 – 1 10 7.60 –U701B4 606 0.80 – 1 10 10.80 –U701B10B 613 0.80 – 1 10 10.80 –U701B26D 626 0.80 – 1 10 10.80 –Stainless VR810-DT US32D 630 – – 1 1 228.40 –VR814-DT US32D 630 – – 1 1 228.40 –Stainless VR810-NL RHR US32D 630 – – 1 1 228.40 –VR810-NL LHR US32D 630 – – 1 1 228.40 –VR814-NL RHR US32D 630 – – 1 1 228.40 –VR814-NL LHR US32D 630 – – 1 1 228.40 –Stainless VR810-NL-V US32D 630 – – 1 1 228.40 –VR814-NL-V US32D 630 – – 1 1 228.40 –Brass AS895 US3 605 – – 1 1 44.30 –AS895 US4 606 – – 1 1 40.80 –AS895 US10 612 – – 1 1 41.30 –AS895 US10B 613 – – 1 1 44.30 –AS895 US26 625 – – 1 1 44.30 –AS895 US26D 626 – – 1 1 44.30 –Bold pricing indicates item is in stock and available for Fast Track50<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL SUBSTRATE MODEL NUMBERVR900/VR904Vandal Resistant TrimUse w/Mortise LocksOutswing DoorsVR900LLP/VR904LLPVandal Resistant TrimUse w/Mortise LocksInswing DoorsLLP = Less Lock ProtectorsVR910DT/VR914DTVandal Resistant TrimUse w/Von Duprin 98/99Series Rim andVerticle Exit DevicesVR910NL/VR914NLVandal Resistant TrimUse w/Von Duprin 98/99Series Rim andVerticle Exit DevicesBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEStainless VR900 LHR US32D 630 – – 1 1 228.40 –VR900 RHR US32D 630 – – 1 1 228.40 –VR904 LHR US32D 630 – – 1 1 228.40 –VR904 RHR US32D 630 – – 1 1 228.40 –Stainless VR900-LLP LH US32D 630 – – 1 1 228.40 –VR900-LLP RH US32D 630 – – 1 1 228.40 –VR904-LLP LH US32D 630 – – 1 1 228.40 –VR904-LLP RH US32D 630 – – 1 1 228.40 –Stainless VR910-DT US32D 630 – – 1 1 228.40 –VR914-DT US32D 630 – – 1 1 228.40 –Stainless VR910-NL US32D 630 – – 1 1 228.40 –VR914-NL US32D 630 – – 1 1 228.40 –HINGESCONTINUOUSHINGESVR910M-DT/VR914M-DTVandal Resistant TrimUse w/Von Duprin 98/9975Series Mortise Exit DevicesVR910M-NL/VR914M-NLVandal Resistant TrimUse w/Von Duprin 98/9975Series Mortise Exit Devices980Storm Door Latch990Sliding Door PullDoors 1-1/8" to 1-1/2"Stainless VR910M-DT US32D 630 – – 1 1 228.40 –VR914M-DT US32D 630 – – 1 1 228.40 –Stainless VR910M-NL US32D 630 – – 1 1 228.40 –VR914M-NL US32D 630 – – 1 1 228.40 –Brass 980B3 605 1.00 – 1 1 28.60 –980B5 609 1.00 – 1 1 29.80 –980B10B 613 1.00 – 1 1 29.80 –980B15 619 1.00 – 1 1 29.80 –980B19 622 1.00 – 1 1 24.90 –980B26 625 1.00 – 1 1 28.60 –980B26D 626 1.00 – 1 1 28.60 –Aluminum 990A3 666 – – 1 10 6.20 –990A5 – – – 1 10 6.20 –990A14 669 – – 1 10 6.20 –990A15 670 – – 1 10 6.90 –990A26D 702 – – 1 10 6.20 –990A-716 – – – 1 10 6.20 –Brass 990B3 605 1.90 – 1 5 9.60 –990B-613 613 1.90 – 1 5 11.00 –990B-619 619 1.90 – 1 5 11.00 –990B26 625 1.90 – 1 5 11.00 –990B-716 – 1.90 – 1 5 11.00 –SC990B-605 605 – Yes 5 5 – 43.50SC990B-609 609 – Yes 5 5 – 52.00SC990B-619 619 – Yes 5 5 – 52.00SC990B-620 620 – Yes 5 5 – 52.00SC990B-625 625 12.00 Yes 5 5 – 66.50SC990B-716 – – Yes 5 5 – 52.00PIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1351
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190MODEL SUBSTRATE MODEL NUMBER991Sliding Door PullDoors 1-1/8" to 1-1/2"Thumb Turn on One SideEmergency Turn onOther Side1010*Residential Hinge 3.5"Square Corner1011*Residential Hinge 3.5"5/8" Radius Corner1012*Residential Hinge 3.5"1/4" Radius Corner1020*Residential Hinge 4"Square Corner1021*Residential Hinge 4"5/8" Radius CornerBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGESteel 991A3 666 – – 1 10 $ 7.30 –991A5 – – – 1 10 7.30 –991A14 669 – – 1 10 8.50 –991A15 670 – – 1 10 8.50 –991A26D 702 – – 1 10 8.50 –991A-716 – – – 1 10 8.50 –Brass 991B3 605 2.30 – 1 5 13.40 –991B26 625 2.30 – 1 5 15.30 –991B-613 613 2.30 – 1 5 15.30 –991B-619 619 2.30 – 1 5 15.30 –991B-716 – 2.30 – 1 5 15.30 –CP991B26 625 2.80 Yes 5 5 – 78.50SC991B-605 605 – Yes 5 5 – 71.00SC991B-609 609 – Yes 5 5 – 78.50SC991B-619 619 – Yes 5 5 – 78.50SC991B-620 620 – Yes 5 5 – 78.50SC991B-716 – – Yes 5 5 – 78.50Steel SC3P1010F-605E 632 – Yes 3 3 – 53.40SC3P1010F-609E 638 – Yes 3 3 – 63.90SC3P1010F-619E – – Yes 3 3 – 63.90SC3P1010F-620E – – Yes 3 3 – 63.90SC3P1010F-716E – – Yes 3 3 – 63.90Steel 1011F-605E 632 – – 1 2 6.10 –1011F-619E 638 – – 1 2 6.10 –1011F-625E – – – 1 2 6.10 –1011F-716E – – – 1 2 6.10 –SC3P1011F-605E 632 – Yes 3 3 – 53.40SC3P1011F-609E 638 – Yes 3 3 – 63.90SC3P1011F-619E – – Yes 3 3 – 63.90SC3P1011F-620E – – Yes 3 3 – 63.90SC3P1011F-716E – – Yes 3 3 – 63.90SC3P1012F-605E 632 – Yes 3 3 – 53.40Steel SC3P1012F-609E 638 – Yes 3 3 – 63.90SC3P1012F-619E – – Yes 3 3 – 63.90SC3P1012F-716E – – Yes 3 3 – 63.90SC3P1020F-605E 632 – Yes 3 3 – 63.90Steel SC3P1020F-609E 638 – Yes 3 3 – 69.00SC3P1020F-619E – – Yes 3 3 – 69.00SC3P1020F-620E – – Yes 3 3 – 69.00SC3P1020F-716E – – Yes 3 3 – 69.00SC3P1021F-605E 632 – Yes 3 3 – 63.90Steel SC3P1021F-609E 638 – Yes 3 3 – 69.00SC3P1021F-619E – – Yes 3 3 – 69.00SC3P1021F-620E – – Yes 3 3 – 69.00SC3P1021F-716E – – Yes 3 3 – 69.00Numerical8200-9340* Note: SC3P (3 pack hinges) must be ordered in multiples of 3. Qty of 3 equals 9 hinges.Bold pricing indicates item is in stock and available for Fast Track52<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL SUBSTRATE MODEL NUMBERRL1152Combination RollerLatch/Applied StopFS1153/FS1154Plunger TypeDoor HolderSB1600M1Handle Up11" Steel BoltB-Packed w/Mortise StrikesT-Packed w/Universal StrikesL-Locking Version*UL ListedSB1600M2Handle Up11" Steel BoltB-Packed w/Mortise StrikesT-Packed w/Universal StrikesL-Locking Version*UL Listed* Lock default code = 1289. Alternative Codes: 1360/1390/1395.BHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEBrass RL1152 US3 605 – – – – $ 113.20 –RL1152 US4 606 – – – – 107.30 –RL1152 US10 612 – – – – 107.30 –RL1152 US10B 613 – – – – 113.20 –RL1152 US26 625 – – – – 113.20 –RL1152 US26D 626 – – – – 110.80 –Aluminum FS1153 US28 628 – – – – 41.20 –Brass FS1154 US3 605 – – – – 74.30 –FS1154 US4 606 – – – – 74.30 –FS1154 US10 612 – – – – 74.30 –FS1154 US10B 613 – – – – 74.30 –FS1154 US26 625 – – – – 74.30 –FS1154 US26D 626 – – – – 74.30 –Steel SB1600M1-B SP28 689 – – – – 107.80 –SB1600M1-B SP10 691 – – – – 114.00 –SB1600M1-B SPBLK 693 – – – – 114.00 –SB1600M1-B SP313 695 – – – – 107.80 –SB1600M1-B SP4 706 – – – – 114.00 –SB1600M1-T SP10 691 – – – – 114.00 –SB1600M1-T SP28 689 – – – – 107.80 –SB1600M1-T SP313 695 – – – – 107.80 –SB1600M1-T SPBLK 693 – – – – 114.00 –SB1600M1-T SP4 706 – – – – 114.00 –SB1600M1-BL SP10 691 – – – – 151.40 –SB1600M1-BL SP28 689 – – – – 157.10 –SB1600M1-BL SP313 695 – – – – 157.10 –SB1600M1-BL SPBLK 693 – – – – 157.60 –SB1600M1-BL SP4 706 – – – – 151.40 –SB1600M1-TL SP10 691 – – – – 157.60 –SB1600M1-TL SP28 689 – – – – 157.60 –SB1600M1-TL SP313 695 – – – – 151.40 –SB1600M1-TL SPBLK 693 – – – – 151.40 –SB1600M1-TL SP4 706 – – – – 157.60 –Steel SB1600M2-B SP4 706 – – – – 114.00 –SB1600M2-B SP10 691 – – – – 114.00 –SB1600M2-B SP28 689 – – – – 107.80 –SB1600M2-B SP313 695 – – – – 107.80 –SB1600M2-B SPBLK 693 – – – – 114.00 –SB1600M2-BL SP4 706 – – – – 157.60 –SB1600M2-T SP10 691 – – – – 114.00 –SB1600M2-T SP28 689 – – – – 107.80 –SB1600M2-T SP313 695 – – – – 107.80 –SB1600M2-T SPBLK 693 – – – – 114.00 –SB1600M2-T SP4 706 – – – – 114.00 –SB1600M2-BL 1SP10 691 – – – – 157.60 –SB1600M2-BL SP28 689 – – – – 157.10 –SB1600M2-BL SP313 695 – – – – 157.10 –SB1600M2-BL SPBLK 693 – – – – 157.60 –SB1600M2-TL SP4 706 – – – – 157.60 –SB1600M2-TL SP10 691 – – – – 157.60 –SB1600M2-TL SP28 689 – – – – 157.10 –SB1600M2-TL SP313 695 – – – – 157.10 –SB1600M2-TL SPBLK 693 – – – – 157.60 –HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1353
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437MODEL SUBSTRATE MODEL NUMBERSB16308" Steel BoltsB-Packed w/Mortise StrikesT-Packed w/Universal StrikesL-Locking Version*UL ListedSB16408" Steel BoltsB-Packed w/Mortise StrikesT-Packed w/Universal StrikesL-Locking Version** Lock default code = 1289. Alternative Codes: 1360/1390/1395.BHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGESteel SB1630-B US2G 604 – – – – $ 36.40 –SB1630-B US10B 640 – – – – 83.90 –SB1630-B US26D 652 – – – – 51.90 –SB1630-T US2G 604 – – – – 40.50 –SB1630-T US10B 640 – – – – 88.10 –SB1630-T US26D 652 – – – – 56.10 –SB1630-BL US2G 604 – – – – 78.80 –SB1630-BL US10B 640 – – – – 113.10 –SB1630-BL US26D 652 – – – – 94.40 –SB1630-TL US2G 604 – – – – 65.40 –SB1630-TL US10B 640 – – – – 119.30 –SB1630-TL US26D 652 – – – – 102.70 –SB1630-TB US2G 604 – – – – 48.00 –SB1630-TB US10B 640 – – – – 99.50 –SB1630-TB US26D 652 – – – – 66.40 –SB1630-TBL US2G 604 – – – – 75.80 –SB1630-TBL US10B 640 – – – – 128.50 –SB1630-TBL US26D 652 – – – – 113.10 –Brass SB1640-B US3 605 – – – – 102.70 –SB1640-B US10B 613 – – – – 102.70 –SB1640-B US26D 626 – – – – 92.40 –SB1640-T US3 605 – – – – 107.80 –SB1640-T US10B 613 – – – – 107.80 –SB1640-T US26D 626 – – – – 99.50 –SB1640-BL US3 605 – – – – 136.90 –SB1640-BL US10B 613 – – – – 136.90 –SB1640-BL US26D 626 – – – – 126.60 –SB1640-TL US3 605 – – – – 144.10 –SB1640-TL US10B 613 – – – – 144.10 –SB1640-TL US26D 626 – – – – 132.80 –Numerical8200-9340Numerical1152-8190Numerical438-1021Bold pricing indicates item is in stock and available for Fast Track54<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MUST BE ORDERED MULTIPLE PACKED LIST PRICEMODEL SUBSTRATE MODEL NUMBER BHMA FINISH WEIGHT IN MULTIPLE QTY QTY PER BOX EACH PACKAGEBrass SC2-3006-605 605 – Yes 5 5 – $ 36.5030X6Classic House Number4"0 SC2-3006-619 619 – Yes 5 5 – 46.50SC2-3006-716 – – Yes 5 5 – 46.50SC2-3016-605 605 – Yes 5 5 – 36.501 SC2-3016-619 619 – Yes 5 5 – 46.50SC2-3016-716 – – Yes 5 5 – 46.50SC2-3026-605 605 – Yes 5 5 – 36.502 SC2-3026-619 619 – Yes 5 5 – 46.50SC2-3026-716 – – Yes 5 5 – 46.50SC2-3036-605 605 – Yes 5 5 – 36.503 SC2-3036-619 619 – Yes 5 5 – 46.50SC2-3036-716 – – Yes 5 5 – 46.50SC2-3046-605 605 – Yes 5 5 – 36.504 SC2-3046-619 619 – Yes 5 5 – 46.50SC2-3046-716 – – Yes 5 5 – 46.50SC2-3056-605 605 – Yes 5 5 – 36.505 SC2-3056-619 619 – Yes 5 5 – 46.50SC2-3056-716 – – Yes 5 5 – 46.50SC2-3066-605 605 – Yes 5 5 – 36.506 SC2-3066-619 619 – Yes 5 5 – 46.50SC2-3066-716 – – Yes 5 5 – 46.50SC2-3076-605 605 – Yes 5 5 – 36.507 SC2-3076-619 619 – Yes 5 5 – 46.50SC2-3076-716 – – Yes 5 5 – 46.50SC2-3086-605 605 – Yes 5 5 – 36.508 SC2-3086-619 619 – Yes 5 5 – 46.50SC2-3086-716 – – Yes 5 5 – 46.50SC2-3096-605 605 – Yes 5 5 – 36.509 SC2-3096-619 619 – Yes 5 5 – 46.50SC2-3096-716 – – Yes 5 5 – 46.50HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1355
HINGESMUST BEORDERED INMULTIPLE QTYMODEL SUBSTRATE MODEL NUMBER VIEW NUMBER & FINISHBHMAFINISH WEIGHTMULTIPLEQTYPACKEDPER BOX EACH PACKAGEBrass SC2-3107B-605 – 605 4 Yes 2 2 – $ 85.603107Door KnockerLIST PRICESC2-3107B-619 – 619 4 Yes 2 2 – 106.00CONTINUOUSHINGESPIVOTSNumerical1-0593125Door Knocker31251/31252Knocker/ViewerAvailablew/UL Viewer OnlyBrass 02-3125-605 – 605 1 – – 1 23.00 –02-3125-609 – 609 1 – – 1 27.00 –02-3125-619 – 619 1 – – 1 27.00 –02-3125-625 – 625 1 – – 1 27.00 –02-3125-626 – 626 1 – – 1 23.00 –02-3125-716 – – 1 – – 1 27.00 –SC2-3125-605 – 605 – Yes 5 5 – 118.50SC2-3125-609 – 609 – Yes 5 5 – 142.50SC2-3125-619 – 619 – Yes 5 5 – 142.50SC2-3125-620 – 620 – Yes 5 5 – 142.50SC2-3125-716 – – – Yes 5 5 – 142.50Brass 02-31251U-605 U700 w 606 viewer 605 – – – 1 33.30 –02-31251U-626 U700 w 626 viewer 626 – – – 1 38.00 –02-31251U-716 U700 w 10B viewer – – – – 1 31.50 –02-31252U-605 U701 w 606 viewer 605 – – – 1 23.00 –02-31252U-626 U701 w 626 viewer 626 – – – 1 39.60 –02-31252U-716 U701 w 10B viewer – – – – 1 33.10 –Numerical8200-9340Numerical1152-8190Numerical438-1021Numerical59-437Bold pricing indicates item is in stock and available for Fast Track56<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
8100/8300 - Series PullHINGESManufacturerCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1357
8100/8300 - Series PullMounting MethodsNumerical8200-9340Numerical1152-8190Numerical438-1021Numerical59-437Numerical1-059PIVOTSCONTINUOUSHINGESHINGESBold pricing indicates item is in stock and available for Fast Track58<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
HINGESManufacturerCONTINUOUSHINGESPIVOTS8100/8200/8300 - SeriesSpecial Pricing InformationSuffixList AddOptional Mounting Types: F 8102, 8103, 8105, 8111, 8302, 8303, 8311 .................................... No Additional ChargeG 8102, 8103, 8111, 8302, 8303, 8311 ......................................... No Additional ChargeH or I 8102, 8103, 8302, 8303 ................................................................9.70J 8102, 8103, 8302, 8303, Back-to-Back Pair .........................................(per pair) 19.20Prefix model number with “PR” for pair. Example PR8102K 8121 ........................................................................(per pair) 6.00L 8103EZ, 8190 .......................................................................14.20M 8103EZ, 8190 .......................................................................27.60N 8103EZ, 8190, 9100 Push/Plate Combinations ..............................................14.20O 8103EZ, 8190, 9100 Push/Plate Combinations ..............................................23.20NS 9100, 9100EZ, 9190 ...................................................... No Additional ChargeNO 9100, 9100EZ, 9190 ..................................................................29.80Optional Finish AM Anti-microbial Coating - US26D or US32D finishes only ........................................26.80Optional Cut-Outs: CFC Cut for cylinder on 8200/8300 Series Push or Pull Plates .......................................4.30(1-1/4” diameter)CFT Cut for Thumbturn on 8200/8300 Series Push or Pull Plates .....................................4.80(3-3/8” diameter)Plates ordered for cut-out for cylinder or thumbturn, cutout is positioned 2” from top and centered in the plate width, up to 4” wide plates. For plates over 4” inwidth, cut-out is located 2” from edge. Please specify Door Handing LH or RH when ordering plates wider than 4”.Numerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Model Description List AddOptional Plate: 8300 For plate pierced for Pull, order 8300 Series .................................. (to 8200 list price) 2.00Specifiy Center to Center dimension (5-1/4”, 6”, 8”, 10”), Finish,and Plate SizeNumerical8200-9340** Item Number indicates product is also available through Schlage Residential.Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1359
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190MODEL PULL CTC SUBSTRATE MODEL NUMBER8102HDStraight Door Pull3/4" Round,1-1/2" ClearanceOptional mounting typesF, G, H, I, J available.See page 59 for listprices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.8103HDStraight Door Pull1" Round,1-1/2" ClearanceOptional mounting typesF, G, H, I, J available.See page 59 for list prices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.Continued on next page.BHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEBrass 8102HD-6 US3 605 – – 1 – $ 40.50 –8102HD-6 US4 606 – – 1 – 40.50 –8102HD-6 US10 612 – – 1 – 46.10 –8102HD-6 US10B 613 – – 1 – 47.80 –6" 8102HD-6 US15 619 – – 1 – 47.80 –8102HD-6 US26 625 – – 1 – 45.50 –8102HD-6 US26D 626 – – 1 – 40.50 –Aluminum 8102HD-6 US28 628 – – 1 – 16.20 –Stainless 8102HD-6 US32D 630 – – 1 – 25.40 –Brass 8102HD-8 US3 605 – – 1 – 45.50 –8102HD-8 US4 606 – – 1 – 45.50 –8102HD-8 US10 612 – – 1 – 52.20 –8102HD-8 US10B 613 – – 1 – 54.00 –8" 8102HD-8 US15 619 – – 1 – 54.00 –8102HD-8 US26 625 – – 1 – 50.60 –8102HD-8 US26D 626 – – 1 – 45.50 –Aluminum 8102HD-8 US28 628 – – 1 – 16.80 –Stainless 8102HD-8 US32D 630 – – 1 – 28.80 –Brass 8102HD-0 US3 605 – – 1 – 53.30 –8102HD-0 US4 606 – – 1 – 53.30 –8102HD-0 US10 612 – – 1 – 61.30 –8102HD-0 US10B 613 – – 1 – 63.00 –10" 8102HD-0 US15 619 – – 1 – 63.00 –8102HD-0 US26 625 – – 1 – 51.90 –8102HD-0 US26D 626 – – 1 – 52.20 –Aluminum 8102HD-0 US28 628 – – 1 – 17.90 –Stainless 8102HD-0 US32D 630 – – 1 – 33.80 –Brass 8103HD-8 US3 605 – – 1 – 80.90 –8103HD-8 US4 606 – – 1 – 80.90 –8103HD-8 US10 612 – – 1 – 91.10 –8103HD-8 US10B 613 – – 1 – 94.30 –8" 8103HD-8 US15 619 – – 1 – 94.30 –8103HD-8 US26 625 – – 1 – 86.00 –8103HD-8 US26D 626 – – 1 – 81.20 –Aluminum 8103HD-8 US28 628 – – 1 – 23.40 –Stainless 8103HD-8 US32 629 – – 1 – 58.30 –8103HD-8 US32D 630 – – 1 – 50.10 –Brass 8103HD-0 US3 605 – – 1 – 89.30 –8103HD-0 US4 606 – – 1 – 89.30 –8103HD-0 US10 612 – – 1 – 102.70 –8103HD-0 US10B 613 – – 1 – 102.70 –10" 8103HD-0 US15 619 – – 1 – 106.20 –8103HD-0 US26 625 – – 1 – 94.30 –8103HD-0 US26D 626 – – 1 – 89.30 –Aluminum 8103HD-0 US28 628 – – 1 – 24.60 –Stainless 8103HD-0 US32 629 – – 1 – 64.60 –8103HD-0 US32D 630 – – 1 – 56.20 –Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track60<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL PULL CTC SUBSTRATE MODEL NUMBER8103HDStraight Door Pull1" Round,1-1/2" ClearanceContinued fromprevious page.8103EZHDStraight Door Pull1" Round,2-1/2" ClearanceOptional mounting typesL, M, N, O available.See page 59 for list prices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.8105Straight Door Pull1" Flattened 1/2 Round,1-1/2" ClearanceOptional mounting typesF available.See page 59 for list prices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.BHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEBrass 8103HD-2 US3 605 – – 1 – $ 97.70 –8103HD-2 US4 606 – – 1 – 97.70 –8103HD-2 US10 612 – – 1 – 114.50 –8103HD-2 US10B 613 – – 1 – 116.40 –12" 8103HD-2 US15 619 – – 1 – 116.40 –8103HD-2 US26 625 – – 1 – 103.80 –8103HD-2 US26D 626 – – 1 – 99.40 –Aluminum 8103HD-2 US28 628 – – 1 – 25.90 –Stainless 8103HD-2 US32 629 – – 1 – 70.90 –8103HD-2 US32D 630 – – 1 – 62.10 –Brass 8103EZHD-8 US3 605 – – 1 – 88.00 –8103EZHD-8 US4 606 – – 1 – 88.00 –8103EZHD-8 US10 612 – – 1 – 98.00 –8103EZHD-8 US10B 613 – – 1 – 101.20 –8" 8103EZHD-8 US15 619 – – 1 – 101.20 –8103EZHD-8 US26 625 – – 1 – 92.80 –8103EZHD-8 US26D 626 – – 1 – 88.20 –Aluminum 8103EZHD-8 US28 628 – – 1 – 31.50 –Stainless 8103EZHD-8 US32 629 – – 1 – 64.30 –8103EZHD-8 US32D 630 – – 1 – 56.10 –Brass 8103EZHD-0 US3 605 – – 1 – 96.30 –8103EZHD-0 US4 606 – – 1 – 96.30 –8103EZHD-0 US10 612 – – 1 – 109.70 –8103EZHD-0 US10B 613 – – 1 – 113.00 –10" 8103EZHD-0 US15 619 – – 1 – 113.00 –8103EZHD-0 US26 625 – – 1 – 101.20 –8103EZHD-0 US26D 626 – – 1 – 96.30 –Aluminum 8103EZHD-0 US28 628 – – 1 – 32.90 –Stainless 8103EZHD-0 US32 629 – – 1 – 70.60 –8103EZHD-0 US32D 630 – – 1 – 62.10 –Brass 8103EZHD-2 US3 605 – – 1 – 104.60 –8103EZHD-2 US4 606 – – 1 – 104.60 –8103EZHD-2 US10 612 – – 1 – 121.50 –8103EZHD-2 US10B 613 – – 1 – 123.20 –12" 8103EZHD-2 US15 619 – – 1 – 123.20 –8103EZHD-2 US26 625 – – 1 – 110.80 –8103EZHD-2 US26D 626 – – 1 – 106.40 –Aluminum 8103EZHD-2 US28 628 – – 1 – 34.30 –Stainless 8103EZHD-2 US32 629 – – 1 – 76.70 –8103EZHD-2 US32D 630 – – 1 – 68.10 –Brass 8105-6 US3 605 – – 1 – 44.10 –8105-6 US4 606 – – 1 – 44.10 –8105-6 US10 612 – – 1 – 54.20 –8105-6 US10B 613 – – 1 – 55.60 –6" 8105-6 US15 619 – – 1 – 55.60 –8105-6 US26 625 – – 1 – 44.40 –8105-6 US26D 626 – – 1 – 40.60 –Aluminum 8105-6 US28 628 – – 1 – 18.40 –Stainless 8105-6 US32D 630 – – 1 – 33.70 –Brass 8105-8 US3 605 – – 1 – 68.50 –8105-8 US4 606 – – 1 – 68.50 –8105-8 US10 612 – – 1 – 74.50 –8105-8 US10B 613 – – 1 – 74.50 –8" 8105-8 US15 619 – – 1 – 74.50 –8105-8 US26 625 – – 1 – 71.50 –8105-8 US26D 626 – – 1 – 71.50 –Aluminum 8105-8 US28 628 – – 1 – 23.00 –Stainless 8105-8 US32D 630 – – 1 – 49.10 –Brass 8105-0 US3 605 – – 1 – 74.50 –8105-0 US4 606 – – 1 – 74.50 –8105-0 US10 612 – – 1 – 83.30 –8105-0 US10B 613 – – 1 – 83.30 –10" 8105-0 US15 619 – – 1 – 83.30 –8105-0 US26 625 – – 1 – 77.50 –8105-0 US26D 626 – – 1 – 77.50 –Aluminum 8105-0 US28 628 – – 1 – 23.80 –Stainless 8105-0 US32D 630 – – 1 – 55.10 –Bold pricing indicates item is in stock and available for Fast TrackHINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1361
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340MODEL PULL CTC SUBSTRATE MODEL NUMBER8111Door Pull 1-3/16"ProjectionOptional mounting typesF, G available.See page 59 for list prices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.8112Door Pull 2-3/16"Antimicrobial CoatingUS26D-AM available.Add 26.80 List.8121Door Pull 3-1/2"Optional mounting types Kavailable. See page 59 forlist prices.Antimicrobial CoatingUS26D-AM available.Add 26.80 List.8190HD90° Offset Door Pull1" Round, 2-1/4"ClearanceOptional mounting typesL, M, N, O available.See page 59 for listprices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.BHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEBrass 8111-5 US3 605 – – 1 – 41.70 –8111-5 US4 606 – – 1 – 41.70 –8111-5 US10 612 – – 1 – 46.70 –8111-5 US10B 613 – – 1 – 46.70 –5" 8111-5 US15 619 – – 1 – 46.70 –8111-5 US26 625 – – 1 – 41.70 –8111-5 US26D 626 – – 1 – 44.70 –Aluminum 8111-5 US28 628 – – 1 – 26.00 –Stainless 8111-5 US32D 630 – – 1 – 38.70 –Brass 8112-5 US26D 626 – – 1 – 34.00 –5"Aluminum C8112-5 PA28 – – Yes 2 2 – 43.805"Brass 8121-5 US26D 626 – – 1 – 47.60 –Brass 8190HD-8 US3 605 – – 1 – 95.30 –8190HD-8 US4 606 – – 1 – 95.30 –8190HD-8 US10 612 – – 1 – 110.10 –8" 8190HD-8 US10B 613 – – 1 – 110.10 –8190HD-8 US15 619 – – 1 – 110.10 –8190HD-8 US26 625 – – 1 – 101.10 –8190HD-8 US26D 626 – – 1 – 101.10 –Stainless 8190HD-8 US32 629 – – 1 – 84.90 –8190HD-8 US32D 630 – – 1 – 69.90 –Brass 8190HD-0 US3 605 – – 1 – 104.10 –8190HD-0 US4 606 – – 1 – 104.10 –8190HD-0 US10 612 – – 1 – 116.20 –8190HD-0 US10B 613 – – 1 – 116.20 –10" 8190HD-0 US15 619 – – 1 – 116.20 –8190HD-0 US26 625 – – 1 – 110.10 –8190HD-0 US26D 626 – – 1 – 110.10 –Stainless 8190HD-0 US32 629 – – 1 – 90.80 –8190HD-0 US32D 630 – – 1 – 76.00 –Brass 8190HD-2 US3 605 – – 1 – 110.10 –8190HD-2 US4 606 – – 1 – 110.10 –8190HD-2 US10 612 – – 1 – 125.00 –8190HD-2 US10B 613 – – 1 – 125.00 –12" 8190HD-2 US15 619 – – 1 – 125.00 –8190HD-2 US26 625 – – 1 – 119.20 –8190HD-2 US26D 626 – – 1 – 119.20 –Stainless 8190HD-2 US32 629 – – 1 – 96.80 –8190HD-2 US32D 630 – – 1 – 81.90 –Brass 8190HD-18 US3 605 – – 1 – 148.90 –8190HD-18 US4 606 – – 1 – 148.90 –8190HD-18 US10 612 – – 1 – 166.80 –8190HD-18 US10B 613 – – 1 – 166.80 –18" 8190HD-18 US15 619 – – 1 – 166.80 –8190HD-18 US26 625 – – 1 – 157.80 –8190HD-18 US26D 626 – – 1 – 157.80 –Stainless 8190HD-18 US32 629 – – 1 – 131.00 –8190HD-18 US32D 630 – – 1 – 116.20 –Bold pricing indicates item is in stock and available for Fast Track62<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL PLATE SIZE SUBSTRATE8200Push PlateAntimicrobial CoatingAvailableSpecify US26D AMorUS32D AM(add $26.80 to list price)MODELNUMBERBHMAFINISH WEIGHTMUST BEORDERED INMULTIPLE QTYMULTIPLEQTYPACKEDLIST PRICEPER BOX EACH PACKAGEBrass 8200 US3 605 – – – – 16.70 –8200 US4 606 – – – – 16.70 –8200 US10 612 – – – – 18.70 –3x12" 8200 US10B 613 – – – – 20.90 –(89x306mm) 8200 US15 619 – – – – 20.90 –8200 US26 625 – – – – 20.90 –8200 US26D 626 – – – – 20.90 –Aluminum 8200 US28 628 – – – – 10.50 –C8200 PA28 628 – Yes 5 5 – 41.50Stainless 8200 US32D 630 – – – – 10.50 –Brass 8200 US3 605 – – – – 18.70 –8200 US4 606 – – – – 18.70 –8200 US10 612 – – – – 21.90 –8200 US10B 613 – – – – 23.10 –8200 US15 619 – – – – 23.10 –3.5x15" 8200 US26 625 – – – – 21.90 –(89x381mm) 8200 US26D 626 – – – – 21.90 –SC8200 B3 605 – Yes 5 5 – 100.00Aluminum 8200 US28 628 – – – – 8.70 –C8200 PA28 – – Yes 5 5 – 43.50Stainless 8200 US32D 630 – – – – 10.90 –CGC8200 US32D 630 – Yes 5 5 – 71.00Brass 8200 US3 605 – – – – 21.90 –8200 US4 606 – – – – 21.90 –8200 US10 612 – – – – 25.10 –4x16" 8200 US10B 613 – – – – 26.20 –(102x408mm) 8200 US15 619 – – – – 26.20 –8200 US26 625 – – – – 25.10 –8200 US26D 626 – – – – 25.10 –Aluminum 8200 US28 628 – – – – 8.30 –Stainless 8200 US32D 630 – – – – 12.50 –Brass 8200 US3 605 – – – – 34.60 –8200 US4 606 – – – – 34.60 –8200 US10 612 – – – – 38.70 –6x16" 8200 US10B 613 – – – – 41.90 –(153x408mm) 8200 US15 619 – – – – 41.90 –8200 US26 625 – – – – 36.70 –8200 US26D 626 – – – – 36.70 –Aluminum 8200 US28 628 – – – – 10.50 –Stainless 8200 US32D 630 – – – – 17.20 –Brass 8200 US3 605 – – – – 42.80 –8200 US4 606 – – – – 42.80 –8x16" 8200 US10 612 – – – – 49.20 –(204x408mm) 8200 US10B 613 – – – – 52.40 –8200 US15 619 – – – – 52.40 –8200 US26 625 – – – – 48.10 –8200 US26D 626 – – – – 48.10 –Aluminum 8200 US28 628 – – – – 13.10 –Stainless 8200 US32D 630 – – – – 24.10 –HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1363
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190MODEL8302Pull PlateOptional mounting typesF, G, H, I, J available.See page 59 for list prices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.PULLCTC PLATE SIZE SUBSTRATE MODEL NUMBERMUST BEORDERED INMULTIPLE QTYLIST PRICEBHMAMULTIPLE PACKEDFINISH WEIGHTQTY PER BOX EACH PACKAGEBrass 8302-6 US3 605 – – – – $ 61.20 –8302-6 US4 606 – – – – 61.20 –8302-6 US10 612 – – – – 70.00 –8302-6 US10B 613 – – – – 72.90 –6" 3.5x15" 8302-6 US15 619 – – – – 72.90 –(89x381mm) 8302-6 US26 625 – – – – 69.40 –8302-6 US26D 626 – – – – 64.40 –Aluminum 8302-6 US28 628 – – – – 29.30 –C8302-6 PA28 628 – Yes 2 2 – $ 85.00Stainless 8302-6 US32D 630 – – – – 38.30 –Brass 8302-6 US3 605 – – – – 64.40 –8302-6 US4 606 – – – – 64.40 –8302-6 US10 612 – – – – 73.20 –4x16" 8302-6 US10B 613 – – – – 76.00 –6" (102x408mm) 8302-6 US15 619 – – – – 76.00 –8302-6 US26 625 – – – – 72.60 –8302-6 US26D 626 – – – – 67.60 –Aluminum 8302-6 US28 628 – – – – 26.50 –Stainless 8302-6 US32D 630 – – – – 39.90 –Brass 8302-6 US3 605 – – – – 77.10 –8302-6 US4 606 – – – – 77.10 –8302-6 US10 612 – – – – 86.80 –6" 6x16" 8302-6 US10B 613 – – – – 91.70 –(153x408mm) 8302-6 US15 619 – – – – 91.70 –8302-6 US26 625 – – – – 84.20 –8302-6 US26D 626 – – – – 79.20 –Aluminum 8302-6 US28 628 – – – – 28.70 –Stainless 8302-8 US32D 630 – – – – 44.60 –Brass 8302-8 US3 605 – – – – 66.20 –8302-8 US4 606 – – – – 66.20 –8" 3.5x15" 8302-8 US10 612 – – – – 76.10 –(89x381mm) 8302-8 US10B 613 – – – – 79.10 –8302-8 US15 619 – – – – 79.10 –8302-8 US26 625 – – – – 74.50 –8302-8 US26D 626 – – – – 69.40 –Aluminum 8302-8 US28 628 – – – – 27.50 –Stainless 8302-8 US32D 630 – – – – 41.70 –Brass 8302-8 US3 605 – – – – 69.40 –8302-8 US4 606 – – – – 69.40 –8302-8 US10 612 – – – – 79.30 –8" 4x16" 8302-8 US10B 613 – – – – 82.20 –(102x408mm) 8302-8 US15 619 – – – – 82.20 –8302-8 US26 625 – – – – 77.70 –8302-8 US26D 626 – – – – 72.60 –Aluminum 8302-8 US28 628 – – – – 27.10 –Stainless 8302-8 US32D 630 – – – – 43.30 –Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track64<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL8302Pull PlateOptional mounting typesF, G, H, I, J available.See page 59 for listprices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.PULLCTC PLATE SIZE SUBSTRATE MODEL NUMBERMUST BEORDERED INMULTIPLE QTYLIST PRICEBHMAMULTIPLE PACKEDFINISH WEIGHTQTY PER BOX EACH PACKAGEBrass 8302-8 US3 605 – – – – $ 82.10 –8302-8 US4 606 – – – – 82.10 –8302-8 US10 612 – – – – 92.90 –8302-8 US10B 613 – – – – 97.90 –8” 6x16" 8302-8 US15 619 – – – – 97.90 –(153x408mm) 8302-8 US26 625 – – – – 89.30 –8302-8 US26D 626 – – – – 84.20 –Aluminum 8302-8 US28 628 – – – – 29.30 –Stainless 8302-8 US32D 630 – – – – 48.00 –Brass 8302-0 US3 605 – – – – 74.00 –8302-0 US4 606 – – – – 74.00 –8302-0 US10 612 – – – – 85.20 –8302-0 US10B 613 – – – – 88.10 –10" 3.5x15" 8302-0 US15 619 – – – – 88.10 –(89x381mm) 8302-0 US26 625 – – – – 75.80 –8302-0 US26D 626 – – – – 76.10 –Aluminum 8302-0 US28 628 – – – – 28.60 –Stainless 8302-0 US32D 630 – – – – 46.70 –Brass 8302-0 US3 605 – – – – 77.20 –8302-0 US4 606 – – – – 77.20 –8302-0 US10 612 – – – – 88.40 –8302-0 US10B 613 – – – – 91.20 –10" 4x16" 8302-0 US15 619 – – – – 91.20 –(102x408mm) 8302-0 US26 625 – – – – 79.00 –8302-0 US26D 626 – – – – 79.30 –Aluminum 8302-0 US28 628 – – – – 28.20 –Stainless 8302-0 US32D 630 – – – – 48.30 –Brass 8302-0 US3 605 – – – – 89.90 –8302-0 US4 606 – – – – 89.90 –8302-0 US10 612 – – – – 102.00 –8302-0 US10B 613 – – – – 106.90 –10" 6x16" 8302-0 US15 619 – – – – 106.90 –(153x408mm) 8302-0 US26 625 – – – – 90.60 –8302-0 US26D 626 – – – – 90.90 –Aluminum 8302-0 US28 628 – – – – 30.40 –Stainless 8302-0 US32D 630 – – – – 53.00 –HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1365
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190MODEL8303Pull PlateOptional mounting typesF, G, H, I, J available.See page 59 for listprices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.PULLCTC PLATE SIZE SUBSTRATE MODEL NUMBERMUST BEORDERED INMULTIPLE QTYLIST PRICEBHMAMULTIPLE PACKEDFINISH WEIGHTQTY PER BOX EACH PACKAGEBrass 8303-8 US3 605 – – – – 101.60 –8303-8 US4 606 – – – – 101.60 –8303-8 US10 612 – – – – 115.00 –8303-8 US10B 613 – – – – 119.40 –8" 3.5x15" 8303-8 US15 619 – – – – 119.40 –(89x381mm) 8303-8 US26 625 – – – – 109.90 –8303-8 US26D 626 – – – – 105.10 –Aluminum 8303-8 US28 628 – – – – 34.10 –Stainless 8303-8 US32D 630 – – – – 41.70 –Brass 8303-8 US3 605 – – – – 104.80 –8303-8 US4 606 – – – – 104.80 –8303-8 US10 612 – – – – 118.20 –8303-8 US10B 613 – – – – 122.50 –8" 4x16" 8303-8 US15 619 – – – – 122.50 –(102x408mm) 8303-8 US26 625 – – – – 113.10 –8303-8 US26D 626 – – – – 108.30 –Aluminum 8303-8 US28 628 – – – – 33.70 –Stainless 8303-8 US32D 630 – – – – 64.60 –Brass 8303-8 US3 605 – – – – 117.50 –8303-8 US4 606 – – – – 117.50 –8303-8 US10 612 – – – – 131.80 –8303-8 US10B 613 – – – – 138.20 –8" 6x16" 8303-8 US15 619 – – – – 138.20 –(153x408mm) 8303-8 US26 625 – – – – 124.70 –8303-8 US26D 626 – – – – 119.90 –Aluminum 8303-8 US28 628 – – – – 35.90 –Stainless 8303-8 US32D 630 – – – – 69.30 –Brass 8303-0 US3 605 – – – – 110.00 –8303-0 US4 606 – – – – 110.00 –8303-0 US10 612 – – – – 126.60 –8303-0 US10B 613 – – – – 127.80 –10" 3.5x15" 8303-0 US15 619 – – – – 131.30 –(89x381mm) 8303-0 US26 625 – – – – 118.20 –8303-0 US26D 626 – – – – 113.20 –Aluminum 8303-0 US28 628 – – – – 35.30 –Stainless 8303-0 US32D 630 – – – – 69.10 –Brass 8303-0 US3 605 – – – – 113.20 –8303-0 US4 606 – – – – 113.20 –8303-0 US10 612 – – – – 129.80 –8303-0 US10B 613 – – – – 130.90 –10" 4x16" 8303-0 US15 619 – – – – 134.40 –(102x408mm) 8303-0 US26 625 – – – – 121.40 –8303-0 US26D 626 – – – – 116.40 –Aluminum 8303-0 US28 628 – – – – 34.90 –Stainless 8303-0 US32D 630 – – – – 70.70 –Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track66<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL8303Pull Plate8305Pull PlateOptional mounting typesF available.See page 59 for listprices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.PULLCTC PLATE SIZE SUBSTRATE MODEL NUMBERMUST BEORDERED INMULTIPLE QTYLIST PRICEBHMAMULTIPLE PACKEDFINISH WEIGHTQTY PER BOX EACH PACKAGEBrass 8303-0 US3 605 – – – – $ 125.90 –8303-0 US4 606 – – – – 125.90 –8303-0 US10 612 – – – – 143.40 –8303-0 US10B 613 – – – – 146.60 –10" 6x16" 8303-0 US15 619 – – – – 150.10 –(153x408mm) 8303-0 US26 625 – – – – 133.00 –8303-0 US26D 626 – – – – 128.00 –Aluminum 8303-0 US28 628 – – – – 37.10 –Stainless 8303-0 US32D 630 – – – – 75.40 –Brass 8305-6 US3 605 – – – – 64.80 –8305-6 US4 606 – – – – 64.80 –8305-6 US10 612 – – – – 78.10 –8305-6 US10B 613 – – – – 80.70 –6" 3.5x15" 8305-6 US15 619 – – – – 80.70 –(89x381mm) 8305-6 US26 625 – – – – 68.30 –8305-6 US26D 626 – – – – 64.50 –Aluminum 8305-6 US28 628 – – – – 29.10 –Stainless 8305-6 US32D 630 – – – – 46.60 –Brass 8305-6 US3 605 – – – – 68.00 –8305-6 US4 606 – – – – 68.00 –8305-6 US10 612 – – – – 81.30 –8305-6 US10B 613 – – – – 83.80 –6" 4x16" 8305-6 US15 619 – – – – 83.80 –(102x408mm) 8305-6 US26 625 – – – – 71.50 –8305-6 US26D 626 – – – – 67.70 –Aluminum 8305-6 US28 628 – – – – 28.70 –Stainless 8305-6 US32D 630 – – – – 48.20 –Brass 8305-6 US3 605 – – – – 80.70 –8305-6 US4 606 – – – – 80.70 –8305-6 US10 612 – – – – 94.90 –6x16" 8305-6 US10B 613 – – – – 99.50 –6" (153x408mm) 8305-6 US15 619 – – – – 99.50 –8305-6 US26 625 – – – – 83.10 –8305-6 US26D 626 – – – – 79.30 –Aluminum 8305-6 US28 628 – – – – 30.90 –Stainless 8305-6 US32D 630 – – – – 52.90 –Brass 8305-8 US3 605 – – – – 89.20 –8305-8 US4 606 – – – – 89.20 –8305-8 US10 612 – – – – 98.40 –3.5x15" 8305-8 US10B 613 – – – – 99.60 –8" (89x381mm) 8305-8 US15 619 – – – – 99.60 –8305-8 US26 625 – – – – 95.40 –8305-8 US26D 626 – – – – 95.40 –Aluminum 8305-8 US28 628 – – – – 33.70 –Stainless 8305-8 US32D 630 – – – – 62.00 –HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1367
HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190MODEL8305Pull PlateOptional mounting typesF available.See page 59 for list prices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.PULLCTC PLATE SIZE SUBSTRATE MODEL NUMBERMUST BEORDERED INMULTIPLE QTYLIST PRICEBHMAMULTIPLE PACKEDFINISH WEIGHTQTY PER BOX EACH PACKAGEBrass 8305-8 US3 605 – – – – $ 92.40 –8305-8 US4 606 – – – – 92.40 –8305-8 US10 612 – – – – 101.60 –8305-8 US10B 613 – – – – 102.70 –8" 4x16" 8305-8 US15 619 – – – – 102.70 –(102x408mm) 8305-8 US26 625 – – – – 98.60 –8305-8 US26D 626 – – – – 98.60 –Aluminum 8305-8 US28 628 – – – – 33.30 –Stainless 8305-8 US32D 630 – – – – 63.60 –Brass 8305-8 US3 605 – – – – 105.10 –8305-8 US4 606 – – – – 105.10 –8305-8 US10 612 – – – – 115.20 –8" 6x16" 8305-8 US10B 613 – – – – 118.40 –(153x408mm) 8305-8 US15 619 – – – – 118.40 –8305-8 US26 625 – – – – 110.20 –8305-8 US26D 626 – – – – 110.20 –Aluminum 8305-8 US28 628 – – – – 35.50 –Stainless 8305-8 US32D 630 – – – – 68.30 –Brass 8305-0 US3 605 – – – – 95.20 –8305-0 US4 606 – – – – 95.20 –8305-0 US10 612 – – – – 107.20 –10" 3.5x15" 8305-0 US10B 613 – – – – 108.40 –(89x381mm) 8305-0 US15 619 – – – – 108.40 –8305-0 US26 625 – – – – 101.40 –8305-0 US26D 626 – – – – 101.40 –Aluminum 8305-0 US28 628 – – – – 34.50 –Stainless 8305-0 US32D 630 – – – – 68.00 –Brass 8305-0 US3 605 – – – – 98.40 –8305-0 US4 606 – – – – 98.40 –8305-0 US10 612 – – – – 110.40 –8305-0 US10B 613 – – – – 111.50 –10" 4x16" 8305-0 US15 619 – – – – 111.50 –(102x408mm) 8305-0 US26 625 – – – – 104.60 –8305-0 US26D 626 – – – – 104.60 –Aluminum 8305-0 US28 628 – – – – 34.10 –Stainless 8305-0 US32D 630 – – – – 69.60 –Brass 8305-0 US3 605 – – – – 89.90 –8305-0 US4 606 – – – – 89.90 –8305-0 US10 612 – – – – 102.00 –8305-0 US10B 613 – – – – 106.90 –10" 6x16" 8305-0 US15 619 – – – – 106.90 –(153x408mm) 8305-0 US26 625 – – – – 90.60 –8305-0 US26D 626 – – – – 90.90 –Aluminum 8305-0 US28 628 – – – – 30.40 –Stainless 8305-0 US32D 630 – – – – 53.00 –Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track68<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL8311Pull PlateOptional mounting typesF available.See page 59 for list prices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.PULLCTC PLATE SIZE SUBSTRATE MODEL NUMBERMUST BEORDERED INMULTIPLE QTYLIST PRICEBHMAMULTIPLE PACKEDFINISH WEIGHTQTY PER BOX EACH PACKAGEBrass 8311-5 US3 605 – – – – 60.40 –SC8311-5B3 605 – Yes 2 2 – 125.408311-5 US4 606 – – – – 60.40 –8311-5 US10 612 – – – – 68.50 –5" 3.5x15" 8311-5 US10B 613 – – – – 69.60 –(89x381mm) 8311-5 US15 619 – – – – 69.70 –8311-5 US26 625 – – – – 64.70 –8311-5 US26D 626 – Yes 5 5 – 328.00CGC8311-5B26D 626 – – – – 61.60 –Aluminum 8311-5 US28 628 – Yes 2 2 – 71.40C8311-5PA28 628 – – – – 34.70 –Stainless 8311-5 US32D 630 – – – – 49.60 –Brass 8311-5 US3 605 – – – – 63.50 –8311-5 US4 606 – – – – 63.50 –8311-5 US10 612 – – – – 71.70 –5" 4x16" 8311-5 US10B 613 – – – – 72.70 –(102x408mm) 8311-5 US15 619 – – – – 72.70 –8311-5 US26 625 – – – – 65.70 –8311-5 US26D 626 – – – – 69.70 –Aluminum 8311-5 US28 628 – – – – 35.00 –Stainless 8311-5 US32D 630 – – – – 51.20 –Brass 8311-5 US3 605 – – – – 76.10 –8311-5 US4 606 – – – – 76.10 –8311-5 US10 612 – – – – 85.20 –5" 6x16" 8311-5 US10B 613 – – – – 88.40 –(153x408mm) 8311-5 US15 619 – – – – 88.40 –8311-5 US26 625 – – – – 78.20 –8311-5 US26D 626 – – – – 81.20 –Aluminum 8311-5 US28 628 – – – – 37.20 –Stainless 8311-5 US32D 630 – – – – 55.80 –HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1369
HINGESNumerical1-059CONTINUOUSHINGESPIVOTS8400 Protection Plate (List <strong>Price</strong> (Per 100 Square <strong>Inc</strong>hes)OVEROVERFINISH SUBSTRATE MAX SIZE UNDER 8” 8” ≤ 16” 16” ≤ 36” 36” ≤ 48”US32DUS32US3US4US10US10BUS15US26US26DUS28ClearBlack654StainlessStainlessBrassBrassBrassBrassBrassBrassBrassAluminumPlasticPlasticSatin StainlessSteelKickplates must be ordered in 1/2” increments48 x 48”48 x 48”36 x 48”36 x 48”24 x 48”36 x 48”36 x 48”36 x 48”36 x 48”48 x 48”48 x 48”48 x 48”48 x 48”$ 12.4027.4033.9033.9037.7038.4038.4037.1037.1011.5010.3010.3010.60$ 11.1025.9031.9031.9035.8035.8036.6035.2035.209.708.208.209.60$ 11.9026.4042.2042.2047.1047.1047.1047.1047.1010.509.409.4010.30$ 11.9026.40NANANANANANANA10.509.409.4010.308400 OptionsSUFFIX DESCRIPTION SIZE LIST ADD PER PLATENumerical8200-9340Numerical1152-8190Numerical438-1021Numerical59-437B4ECSNHNH-ATEKTORXERSHand Bevel Four Edges of Metal Plates(supplied standard on plastic kickplates)Counter Sink Holes(supplied standard on plastic kickplates)No Mounting Holes - US32 or US32D onlyNo Mounting Holes with Adhesive(US32 or US32D only)Self Drilling Tek Screws (package of 16)Torx Brand Security Screws (package of 16)Prepped for Extra Row of Screws(For extra mounting hole option, customer mustspecify location and quantity of holes required)16” and underover16”12” and underover 12” up to 24”$ 2.508.807.7019.4019.4041.604.808.80Consult FactoryMODEL DESCRIPTION SIZE LIST ADD8401Gasket Tape Kit (sold separately)Fits 8” x 34” $ 15.00 ea.8402UL Label Kickplate (not available on plastic kickplates)13.00 ea.Bold pricing indicates item is in stock and available for Fast Track70<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
Door Plate Hundred Square <strong>Inc</strong>h Sizing Chartwidthheightinches 22 24 26 28 30 32 34 36 38 40 42 44 46 484 0.88 0.96 1.04 1.12 1.2 1.28 1.36 1.44 1.52 1.6 1.68 1.76 1.84 1.926 1.32 1.44 1.56 1.68 1.8 1.92 2.04 2.16 2.28 2.4 2.52 2.64 2.76 2.888 1.76 1.92 2.08 2.24 2.4 2.56 2.72 2.88 3.04 3.2 3.36 3.52 3.68 3.8410 2.2 2.4 2.6 2.8 3 3.2 3.4 3.6 3.8 4 4.2 4.4 4.6 4.812 2.64 2.88 3.12 3.36 3.6 3.84 4.08 4.32 4.56 4.8 5.04 5.28 5.52 5.7614 3.08 3.36 3.64 3.92 4.2 4.48 4.76 5.04 5.32 5.6 5.88 6.16 6.44 6.7216 3.52 3.84 4.16 4.48 4.8 5.12 5.44 5.76 6.08 6.4 6.72 7.04 7.36 7.6818 3.96 4.32 4.68 5.04 5.4 5.76 6.12 6.48 6.84 7.2 7.56 7.92 8.28 8.6420 4.4 4.8 5.2 5.6 6 6.4 6.8 7.2 7.6 8 8.4 8.8 9.2 9.622 4.84 5.28 5.72 6.16 6.6 7.04 7.48 7.92 8.36 8.8 9.24 9.68 10.12 10.5624 5.28 5.76 6.24 6.72 7.2 7.68 8.16 8.64 9.12 9.6 10.08 10.56 11.04 11.5226 5.72 6.24 6.76 7.28 7.8 8.32 8.84 9.36 9.88 10.4 10.92 11.44 11.96 12.4828 6.16 6.72 7.28 7.84 8.4 8.96 9.52 10.08 10.64 11.2 11.76 12.32 12.88 13.4430 6.6 7.2 7.8 8.4 9 9.6 10.2 10.8 11.4 12 12.6 13.2 13.8 14.432 7.04 7.68 8.32 8.96 9.6 10.24 10.88 11.52 12.16 12.8 13.44 14.08 14.72 15.3634 7.48 8.16 8.84 9.52 10.2 10.88 11.56 12.24 12.92 13.6 14.28 14.96 15.64 16.3236 7.92 8.64 9.36 10.08 10.8 11.52 12.24 12.96 13.68 14.4 15.12 15.84 16.56 17.2838 8.36 9.12 9.88 10.64 11.4 12.16 12.92 13.68 14.44 15.2 15.96 16.72 17.48 18.2440 8.8 9.6 10.4 11.2 12 12.8 13.6 14.4 15.2 16 16.8 17.6 18.4 19.242 9.24 10.08 10.92 11.76 12.6 13.44 14.28 15.12 15.96 16.8 17.64 18.48 19.32 20.1644 9.68 10.56 11.44 12.32 13.2 14.08 14.96 15.84 16.72 17.6 18.48 19.36 20.24 21.1246 10.12 11.04 11.96 12.88 13.8 14.72 15.64 16.56 17.48 18.4 19.32 20.24 21.16 22.0848 10.56 11.52 12.48 13.44 14.4 15.36 16.32 17.28 18.24 19.2 20.16 21.12 22.08 23.04When pricing IVES Series 8400 Door Protection Plates to order, find the hundred square inch size on the chart above.If ordering in increments not shown on above matrix, use the next larger size, height or width.Example: 9 1/2” x 33 1/2” = 10 x 34 or 3.40 sq. inches.For pricing, multiply square inch size by list price = 3.40 sq. inches X US32D list $11.10 = $37.74HINGESCONTINUOUSHINGESPIVOTSNumerical1-059Return Policy - requires prior approval, consult factory.Residential KickplatesMODEL SUBSTRATE PACKING MODEL NUMBER WEIGHT ORDER QTY BOX QTY LIST PRICE PKG PRICE8400PA28 6X34 1 5 $ 12.80 –8400 Aluminum BOX PACK8400PA28 8X34 1 5 24.10 –ResidentialKickplatesC8400PA28 6X30 5 5 – 104.10CARDEDC8400PA28 6X34 5 5 – 110.80SC8400PA28 8X34 5 5 – 138.40SC8400PA3 6X30 5 5 – 152.00SC8400PA3 6X34 5 5 – 159.20SC8400PA3 8X34 5 5 – 193.60SC8400PA-619 8X34 5 5 – 194.60SC8400PA-716 8X34 5 5 – 189.70Brass CARDEDC8400B3 6X30 5 5 – 234.80C8400B3 6X34 5 5 – 248.80C8400B-505 6X30 5 5 – 276.50C8400B-505 8X34 5 5 – 483.60SC8400B3 8X34 5 5 – 276.50SC8400B-619 6X30 5 5 – 248.80SC8400B-716 6X30 5 5 – 248.80Note: All items in price book available as special order. Please contact Schlage Residential customer service at 800-847-8688Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340Bold pricing indicates item is in stock and available for Fast Track<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1371
MODEL PULL CTC PUSH CTC SUBSTRATE FINISH MODEL NUMBER DESCRIPTION WEIGHT ORDER QTY BOX QTY LIST PRICEHINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-93409100HDPush Bar, 1” Round,2-1/2” ProjectionPull PlateOptional mounting typesNS, NO available.See page 59 for list prices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.Custom Sizing AvailableUnder 28” same price as 28”.Over 28” less than 33”same price as 33”.Over 33”, add$4.30 List per inch.9103EZHDPush / Pull Combo1” Round(8103EZ Pull + 9100 Push)Optional mounting typesNS, NO available.See page 59 for list prices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.28” Brass 605 9100HD-28-US3Brass 606 9100HD-28-US4Brass 612 9100HD-28-US10Brass 613 9100HD-28-US10BBrass 619 9100HD-28-US15Brass 625 9100HD-28-US26Brass 626 9100HD-28-US26DStainless 629 9100HD-28-S32Stainless 630 9100HD-28-S32D33” Brass 605 9100HD-33-US3Brass 606 9100HD-33-US4Brass 612 9100HD-33-US10Brass 613 9100HD-33-US10BBrass 619 9100HD-33-US15Brass 625 9100HD-33-US26Brass 626 9100HD-33-US26DStainless 629 9100HD-33-US32Stainless 630 9100HD-33-US32D8” 28” Brass 605 9103EZHD-28-8-US3Brass 606 9103EZHD-28-8-US4Brass 612 9103EZHD-28-8-US10Brass 613 9103EZHD-28-8-US10BBrass 619 9103EZHD-28-8-US15Brass 625 9103EZHD-28-8-US26Brass 626 9103EZHD-28-8-US26DStainless 629 9103EZHD-28-8-US32Stainless 630 9103EZHD-28-8-US32D10” 28” Brass 605 9103EZHD-28-0-US3Brass 606 9103EZHD-28-0-US4Brass 612 9103EZHD-28-0-US10Brass 613 9103EZHD-28-0-US10BBrass 619 9103EZHD-28-0-US15Brass 625 9103EZHD-28-0-US26Brass 626 9103EZHD-28-0-US26DStainless 6 29 9103EZHD-28-0-US32Stainless 630 9103EZHD-28-0-US32D12” 28” Brass 605 9103EZHD-28-2-US3Brass 606 9103EZHD-28-2-US4Brass 612 9103EZHD-28-2-US10Brass 613 9103EZHD-28-2-US10BBrass 619 9103EZHD-28-2-US15Brass 625 9103EZHD-28-2-US26Brass 626 9103EZHD-28-2-US26DStainless 629 9103EZHD-28-2-US32Stainless 630 9103EZHD-28-2-US32D8” 33” Brass 605 9103EZHD-33-8-US3Brass 606 9103EZHD-33-8-US4Brass 612 9103EZHD-33-8-US10Brass 613 9103EZHD-33-8-US10BBrass 619 9103EZHD-33-8-US15Brass 625 9103EZHD-33-8-US26Brass 626 9103EZHD-33-8-US26DStainless 629 9103EZHD-33-8-US32Stainless 630 9103EZHD-33-8-US32D10” 33” Brass 605 9103EZHD-33-0-US3Brass 606 9103EZHD-33-0-US4Brass 612 9103EZHD-33-0-US10Brass 613 9103EZHD-33-0-US10BBrass 619 9103EZHD-33-0-US15Brass 625 9103EZHD-33-0-US26Brass 626 9103EZHD-33-0-US26DStainless 629 9103EZHD-33-0-US32Stainless 630 9103EZHD-33-0-US32D$ 185.50185.50218.50218.50218.50191.50191.50151.80134.00185.50185.50218.50218.50218.50191.50191.50203.90134.00281.50281.50329.30329.30329.00293.30293.30236.90215.70265.60280.20280.20280.20280.20280.20280.20221.20194.50277.70277.70322.50322.50322.50286.50286.50285.20205.00281.50281.50329.30329.30329.00293.30293.30236.90215.70271.70271.70313.60313.60280.20280.80280.80227.10200.40Bold pricing indicates item is in stock and available for Fast Track72<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
MODEL PULL CTC PUSH CTC SUBSTRATE FINISH MODEL NUMBER DESCRIPTION WEIGHT ORDER QTY BOX QTY LIST PRICE9103EZHDPush / Pull Combo1” Round(8103EZ Pull + 9100 Push)Optional mounting typesNS, NO available.See page 59 for list prices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.9190HDPush / Pull Combo1” Round(8190EZ Pull + 9100 Push)Optional mounting typesNS, NO available.See page 59 for list prices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.80 List.Custom Sizing AvailableUnder 28” same price as 28”.Over 28” less than 33”same price as 33”.Over 33”, add$4.30 List per inch.Continued on next page.Brass 605 9103EZHD-33-2-US3606 9103EZHD-33-2-US4612 9103EZHD-33-2-US10613 9103EZHD-33-2-US10B12” 33” 619 9103EZHD-33-2-US15625 9103EZHD-33-2-US26626 9103EZHD-33-2-US26DStainless 629 9103EZHD-33-2-US32630 9103EZHD-33-2-US32DBrass 605 9190HD-28-8-USB38” 28” 606 9190HD-28-8-US4612 9190HD-28-8-US10613 9190HD-28-8-US10B619 9190HD-28-8-US15625 9190HD-28-8-US26626 9190HD-28-8-US26DStainless 629 9190HD-28-8-US32630 9190HD-28-8-US32DBrass 605 9190HD-28-0-US310” 28” 606 9190HD-28-0-US4612 9190HD-28-0-US10613 9190HD-28-0-US10B619 9190HD-28-0-US15625 9190HD-28-0-US26626 9190HD-28-0-US26DStainless 629 9190HD-28-0-US32630 9190HD-28-0-US32DBrass 605 9190HD-28-2-US312” 28” 606 9190HD-28-2-US4612 9190HD-28-2-US10613 9190HD-28-2-US10B619 9190HD-28-2-US15625 9190HD-28-2-US26626 9190HD-28-2-US26DStainless 629 9190HD-28-2-US32630 9190HD-28-2-US32DBrass 605 9190HD-28-18-US318” 28” 606 9190HD-28-18-US4612 9190HD-28-18-US10613 9190HD-28-18-US10B619 9190HD-28-18-US15625 9190HD-28-18-US26626 9190HD-28-18-US26DStainless 629 9190HD-28-18-US32630 9190HD-28-18-US32DBrass 605 9190HD-33-8-US38” 33” 606 9190HD-33-8-US4612 9190HD-33-8-US10613 9190HD-33-8-US10B619 9190HD-33-8-US15625 9190HD-33-8-US26626 9190HD-33-8-US26DStainless 629 9190HD-33-8-US32630 9190HD-33-8-US32DBrass 605 9190HD-33-0-US310” 33” 606 9190HD-33-0-US4612 9190HD-33-0-US10613 9190HD-33-0-US10B619 9190HD-33-0-US15625 9190HD-33-0-US26626 9190HD-33-0-US26DStainless 629 9190HD-33-0-US32630 9190HD-33-0-US32D$277.70277.70322.50322.50322.50286.50286.50233.20205.00286.50286.50334.60334.60329.10298.60298.60242.20209.40295.60295.60340.40340.40335.20307.60307.60248.00215.40301.70301.70349.40349.40344.20316.60316.60306.10221.20335.20335.20386.00386.00386.00350.10350.10283.00250.10286.50286.50334.60334.60329.10298.60298.60242.20209.40295.60295.60340.40340.40335.20307.60307.60248.00215.40Bold pricing indicates item is in stock and available for Fast TrackHINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1373
MODEL PULL CTC PUSH CTC SUBSTRATE FINISH MODEL NUMBER DESCRIPTION WEIGHT ORDER QTY BOX QTY LIST PRICEHINGESNumerical1-059CONTINUOUSHINGESPIVOTSContinued from previous page.9190HDPush / Pull Combo1” Round(8190EZ Pull + 9100 Push)Optional mounting typesNS, NO available.See page 59 for list prices.Antimicrobial CoatingUS26D-AM or US32D-AMavailable. Add 26.00 List.Brass 605 9190HD-33-2-US312” 33” 606 9190HD-33-2-US4612 9190HD-33-2-US10613 9190HD-33-2-US10B619 9190HD-33-2-US15625 9190HD-33-2-US26626 9190HD-33-2-US26DStainless 629 9190HD-33-2-US32630 9190HD-33-2-US32DBrass 605 9190HD-33-18-US318” 33” 606 9190HD-33-18-US4612 9190HD-33-18-US10613 9190HD-33-18-US10B619 9190HD-33-18-US15625 9190HD-33-18-US26626 9190HD-33-18-US26DStainless 629 9190HD-33-18-US32630 9190HD-33-18-US32D$ 301.70301.70349.40349.40344.20316.60316.60306.10221.20335.20335.20386.00386.00386.00350.10350.10335.00250.10Numerical8200-9340Numerical1152-8190Numerical438-1021Numerical59-437Bold pricing indicates item is in stock and available for Fast Track74<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
Offset Long Pulls Pull CTC Length Model BHMA List9264 (Round Tip) 20” 36” 9264-605 605 $647.8020” 36” 9264-606 606 $647.8020” 36” 9264-613 613 $684.2020” 36” 9264-629 629 $628.9020” 36” 9264-630 630 $423.309264F (Flat Tip) 20” 36” 9264F-605 605 $647.8020” 36” 9264F-606 606 $647.8020” 36” 9264F-613 613 $684.2020” 36” 9264F-629 629 $628.9020” 36” 9264F-630 630 $423.309265 (Round Tip) 56” 72” 9265-605 605 $761.2056” 72” 9265-606 606 $761.2056” 72” 9265-613 613 $791.5056” 72” 9265-629 629 $739.0056” 72” 9265-630 630 $505.909265F (Flat Tip) 56” 72” 9265F-605 605 $761.2056” 72” 9265F-606 606 $761.2056” 72” 9265F-613 613 $791.5056” 72” 9265F-629 629 $739.0056” 72” 9265F-630 630 $505.90Straight Long Pulls9266 (Round Tip) 20” 36” 9266-605 605 $504.4020” 36” 9266-606 606 $504.4020” 36” 9266-613 613 $517.1020” 36” 9266-629 629 $489.7020” 36” 9266-630 630 $354.009266F (Flat Tip) 20” 36” 9266F-605 605 $504.4020” 36” 9266F-606 606 $504.4020” 36” 9266F-613 613 $517.1020” 36” 9266F-629 629 $489.7020” 36” 9266F-630 630 $354.009267 (Round Tip) 56” 72” 9267-605 605 $617.0056” 72” 9267-606 606 $617.0056” 72” 9267-613 613 $624.2056” 72” 9267-629 629 $599.9056” 72” 9267-630 630 442.709267F (Flat Tip) 56” 72” 9267F-605 605 $617.0056” 72” 9267F-606 606 $617.0056” 72” 9267F-613 613 $624.2056” 72” 9267F-629 629 $599.9056” 72” 9267F-630 630 $442.70Custom Lengths. List price add per inch (36"min, 108" Max.) Must be ordered in 1" increments.Use model #s 6264, 9264F, 9266, 9266F for 36"-71" pullsUse model #s 6265, 9265F, 9267, 9267F for ≥ 72" pullsOptional Mounting HardwareMounting Bracket (Mid post Required), add for pulls over 8’ .................................$119.40Type F Standard Mounting Kit, specify size* .........................................$4.20Type N Back-to-back, specify size* ...............................................$18.50Type P Back-to-back Glass Door Mounting Kit, Door Thickness 1/2˝ Standard ...............$13.80Type H&I Single Concealed Wood or Aluminmum Door Mounting Kit ........................$36.80Type X Spanner head security screw - US10B (613) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $38.20all other finishes .......................................................$23.20Type L Single Concealed Metal Door - 1’ ..........................................$14.20*Note: Must specify door thickness, 1-3/4˝, 2˝, or 2-1/4˝.605/606 $49.30613 $55.60630 $10.00Bold pricing indicates item is in stock and available for Fast TrackHINGESCONTINUOUSHINGESPIVOTSNumerical1-059Numerical59-437Numerical438-1021Numerical1152-8190Numerical8200-9340<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/1375
Hobby HardwareMODEL SUBSTRATE MODEL NUMBER BHMA FINISH WEIGHT ORDER QTY BOX QTY LIST PRICEHINGESCONTINUOUSHINGESPIVOTSNumerical1-05978 Hook & Staple Brass C78B3 605 5 586 Barrel Bolt Brass C86B3 605 5 59011 Middle Butt Hinge Brass C9011B3 605 5 59031 Middle Butt Hinge Brass C9031B3 605 5 59041 Middle Butt Hinge Brass C9041B3 605 5 59042 Broad Butt Hinge Brass C9042B3 605 5 59051 Middle Butt Hinge Brass C9051B3 605 5 59070 Decorative Hinge Steel C9070F3 632 5 59071 Antique Decorative Hinge Brass C9071B5 609 5 59072 Decorative Hinge Brass C9072B3 605 5 59110 Solid Brass Hasp Brass C9110B3 605 5 59120 Solid Brass Hasp Brass C9120B3 605 5 59130 Solid Brass Hasp w/Hook Brass C9130B3 605 5 59210 Support Hinge Steel C9210F3 LH 632 5 59210 Support Hinge Steel C9210F3 RH 632 5 59220 Friction Lid Support Steel C9220F3 LH 632 5 59220 Friction Lid Support Steel C9220F3 RH 632 5 59311 Brass Corner Brass C9311B3 605 5 59320 Brass Brackets Brass C9320B3 605 5 59321 Brass Brackets Brass C9321B3 605 5 59330 Draw Catch Steel C9330F3 632 5 59340 Chest Handle Steel C9340F3 632 5 5$ 6.5021.0013.5016.0018.5019.5028.5014.5023.5017.0012.5014.0017.0015.0015.0022.0022.0021.5015.5016.5018.5017.50Numerical8200-9340Numerical1152-8190Numerical438-1021Numerical59-43776<strong>Ives</strong> <strong>Price</strong> <strong>Book</strong> 28BEffective July 1, 2013 • Rev. 7/13
WARRANTY<strong>Ives</strong> (the “Company”) warrants only to Customer that the products will be free from defects in materialand workmanship for a period of 12 months from the date of shipment of products. Continuous hinges carrya Lifetime Warranty with exception of electrified continuous hinged which carry a 12 month Warranty fromtime of shipment. The Customer shall be obligated to promptly report any failure to conform to this warrantyin writing to the Company within the warranty period provided above. Company’s sole obligation under thiswarranty is limited to repairing or replacing, at its option, the defective products.NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TO THE PRODUCTSINCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESSFOR A PARTICULAR PURPOSE.The provisions of this limited warranty do not apply to products: (i) used for the purposes for which they arenot designed or intended; (ii) which have been repaired or altered without Company’s prior written consent;(iii) which have been subjected to misuse, abuse, negligence, or accident; (iv) which have been improperlystored, installed, maintained, or operated; (v) which have been used in violation of written instructionsprovided by Company to Customer; (vi) which have been subjected to improper temperature, humidity, orother environmental conditions; (vii) which have been affected by normal wear and tear; or (viii) which, basedon Company’s examination, do not disclose to Company’s satisfaction nonconformance to the warranty.The following costs and expenses are not covered by the provisions of this limited warranty: (i) labor costsfor the removal and reinstallation of products; (ii) shipping and freight expenses required to return productsto Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this warrantyare not applicable to anything other than defects in Company’s material (products only) or workmanship.CONSUMER PRODUCTS. With respect to “consumer products” as defined under the Magnuson-MossWarranty Act (“MMWA”), the following statements are made. (a) Some states do not allow limitations on howlong an implied warranty lasts, so the above limitation may not apply to you. IF ANY IMPLIED WARRANTYIS PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF THE WARRANTYPROVIDED ABOVE. (b) Some states do not allow the exclusion or limitation of incidental or consequentialdamages, so the above limitation or exclusion may not apply to you. (c) This warranty gives you specific legalrights and you may also have other rights which vary from state to state.
Commercial Customer Service: 877-671-7011Residential Customer Service: 800-847-8688www.ives.ingersollrand.com© 2007 Ingersoll-Rand Company Limited MS-C62 Rev. 10/07 Printed in U.S.A.© 2013 Ingersoll Rand IV-2038 Rev. 7/13 Printed in U.S.A.
<strong>Price</strong> <strong>Book</strong> 2013BEffective July 1, 2013EffectiveJuly 1, 2013
<strong>Price</strong>s subject to change without notice2<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
Table of Contents and Finish ListCustomer Service Telephone and Fax Numbers...................see belowFinish List.......................................................................................see belowSales Terms and Conditions................................................................ 4 - 7PRODUCTSOverhead Holders & StopsFunction & Option Guide........................................................................ 8How to Order............................................................................................ 870/79 Series Surface............................................................................... 981 Series Surface.................................................................................. 1090 Series Surface.................................................................................. 11100 Series Concealed........................................................................... 12410 Series Concealed........................................................................... 13450 Series Surface................................................................................ 14280 Series (Sensaguard)...................................................................... 15Push/Pull (Hospital) LatchesHL6 Push/Pull Latches.......................................................................... 16HL6 with Mortise Locks........................................................................ 17PL7 & PL8 Privacy Latches.................................................................. 16Ordering Guide for Engraved Latches............................................... 17Warranty..................................................................................................... 37PARTSParts for 70 and 79 Series Overhead Holders & Stops..............20-22Parts for 80/81 Series Overhead Holders & Stops.....................22-23Parts for 90 Series Overhead Holders & Stops...........................24-25Parts for 100 Series Overhead Holders & Stops.........................26-27Parts for 410/450 Series Overhead Holders & Stops.................28-30Parts for 280 Sensaguard Overhead Holder..................................... 30Parts for HL6/PL7/PL8 Series Push/Pull Latches........................31-36Finish List (Nearest US and BHMA Equivalents)U.S. # BHMA # DescriptionUS3 605 Brass, BrightUS4 606 Brass, SatinUS10 612 Bronze, SatinUS10B 613 Bronze, Dark Oxidized Satin, OilRubbedUS26 625 Chromium Plated, BrightUS26D 626 Chromium Plated, SatinUS28 628 Aluminum, Clear Anodized, SatinUS32 629 Stainless Steel, BrightUS32D 630 Stainless Steel, Satin313AN 710 Aluminum, Dark Bronze AnodizedGlynn-JohnsonFinish # BHMA # The following are powder-coat paintedfinishes:SP10 691 BronzeSP4 706 BrassSP28 689 AluminumSPBLK 622 BlackSP313 695 Dark Bronze652 652 Chrome-Like Coating on SteelFor a list of available BAA/ARRA compliant products pleasecontact your local SSC or sales representative to see theIngersoll Rand Security Technologies BAA/ARRA catalog.Customer Care 1-877-671-7011PLEASE NOTE: For authorized customers, please refer to <strong>Price</strong> <strong>Book</strong> forproducts available in 24-hour or 5-days. Customer Service 1-866-ICALLIR (1-866-422-5547) Fax: 1-800-288-4242<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 3
Ingersoll Rand Company Security Technologies Sector General Terms and Conditions of Sale and Service1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions by whichCompany will quote and sell Deliverables to Customer; (b) The terms “purchase order” or “order” for thepurposes of this Agreement include the term “request for quotation,” as appropriate; (c) This Agreementsupersedes all pre-printed or boilerplate terms and conditions set forth in any purchase order issued byCustomer; (d) No reference herein to Customer’s purchase order will in any way incorporate differentor additional terms and conditions, all of which Company hereby expressly objects to; (e) ANYACCEPTANCE BY COMPANY OF CUSTOMER'S PURCHASE ORDER IS EXPRESSLYCONDITIONED ON THE CUSTOMER'S ASSENT TO AND ACCEPTANCE OF THE TERMSAND CONDITIONS CONTAINED IN THIS AGREEMENT; (f) Company reserves the right todecline any order, in whole or in part, for any reason.2. ORDERS.a. Order Processing. When Customer wishes to place an order for Deliverables, it will deliver toCompany a purchase order. All such purchase orders must (i) be in a written format acceptable toCompany, (ii) be legible, (iii) include a purchase order number, (iv) include Customer’s account number,invoice address, ship to address, shipping method, shipper’s letter of instruction for international shipments,part number, pricing, and designated contact information, (v) include, if applicable, any special configurationID numbers, necessary programming information, special factory instructions, and requested specificationsregarding a particular finish, handing, design, backset, or strike, and (vi) reference any applicablepricing discounts under an ongoing buying program or based on a written quote from Company, along withthe applicable buying program number or quotation number.b. Minimum Orders. In the event the order value does not meet any required minimum net Deliverablevalue, Company may, at its sole discretion, (i) increase the quantity of items in the order to meet the minimumnet Deliverable value requirement; (ii) apply a minimum order charge; (iii) reject the order, or (iv)waive the requirement, provided that the waiver of a requirement for one order shall not constitute a waiverof the requirement for any future orders.c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt of each purchaseorder issued in accordance with this Agreement, and (ii) notify Customer whether Company accepts orrejects the purchase order. If Company fails to accept or reject a purchase order within a reasonable timeperiod, such failure to respond will be deemed a rejection of the entire order.d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding order changesand cancellations are available on the Ingersoll Rand customer website, WHICH TERMS AREEXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwise provided herein,Customer acknowledges that (i) requesting a Change Order may cause a delay in the scheduled shipmentdate, a longer lead time or result in a new scheduled shipment date; (ii) Orders may not be changed after48 hours of Company’s order acknowledgment; (iii) After 48 hours of Company’s order acknowledgment,all changes to an accepted purchase order will be subject to a Change Order charge of 25% of thenet Deliverable value, plus the cost of labor and fabrication or raw material that Company incurred priorto the receipt of the Change Order from Customer, or that may be required due to the Change Order; (iv)the requested change may result in additional charges for labor, fabrication, and raw material, and (v) ifCustomer cancels an order or portion of an order that includes Deliverables that have been manufacturedand prepped for shipping, a 35% restocking fee will apply. Notwithstanding the foregoing, Customer cannotchange or cancel credential orders, reader orders, biometrics orders or any non-cataloged, special, Custom ornonstandard items once they have been placed. All cancelled orders for a Non Recurring Expense (NRE),credential orders, reader orders, biometrics orders, and/or Custom orders will be subject to a cancellationcharge of 100% of the acknowledged price.e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered as separate standaloneorders and must qualify for all terms of sale, including discounts, on an individual basis.f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour Fast Track Program.For 3-day Fast Track orders, changes and cancellations may only be requested by Customer within 24 hoursof Company’s order acknowledgment if the order has not shipped. For 5-Day Fast Track orders, changesand cancellations may only be requested by Customer if the order has not shipped and if the request is madeto Company within 48 hours of Company’s order acknowledgment. Return Material Authorization (RMA)for Deliverables must be processed through Fast Track Customer Service.g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed without penalty onlyif made within 48 hours of Company’s order acknowledgment, and provided that the order has not shipped.Some exceptions do apply – please consult the factory. Changes are not allowed on Rapid Program ordersafter the order has been entered and acknowledged. After 48 hours of Company’s order acknowledgment,all changes or cancellations are subject to a charge of 25% of the order. Unless otherwise specifiedby Company in writing, any changes to orders acknowledged by Company that affect the delivery datewill be deemed a new order and will require acknowledgement by Company as provided in this Section.Additional products, features, terms and conditions regarding the Rapid Program are available on theIngersoll Rand customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREINBY REFERENCE.3. PRICES, INVOICES AND PAYMENT.a. <strong>Price</strong>s. The prices in Company’s <strong>Price</strong> <strong>Book</strong> are subject to change at any time, without notice toCustomer. Company may charge Customer additional amounts if Customer requests special packing, marking,shipment, product modification, or engineering services. Oral prices specified by Company are nulland void. Quote numbers must be referenced on Customer’s purchase order in order for the Company’squoted pricing to apply. Orders that do not reference a quote number will receive buy program pricing orbook net pricing. Quoted prices are for those specific products quoted for a specified job, and are subject tothe <strong>Price</strong> <strong>Book</strong> in effect at the time the quote was issued by Company.b. Taxes. <strong>Price</strong>s do not include any present or future federal, state or local property, license, privilege,sales, use, excise, gross receipts or other like taxes or assessments which may result from transactions or anyservices performed in connection therewith. Any taxes, charges, or duties imposed by any governmentalauthority on the sale of Deliverables will be paid by Customer, in addition to the selling price specified byCompany.c. Payment Terms. Company will deliver to Customer an invoice with each shipment of Deliverableshereunder. Customer will pay all invoiced amounts within 35 days of the invoice date, provided thatCustomer may take a 2% discount if Customer pays in cash and Company receives said payment within 20days of the invoice date. For the avoidance of doubt, cash discounts do not apply to credit card payments.Customer will make all payments in United States dollars. Past due invoices will be subject to a late paymentservice charge of 1.5% per month on any overdue unpaid balance, equivalent to 18% per annum, orthe maximum rate permitted by law, whichever is less. Customer shall reimburse Company for all costsof collection, including, without limitation, reasonable attorneys' fees, for any overdue amount owed byCustomer to Company, and such collection costs shall also be subject to interest charges.4. QUOTATIONS.a. Project Quotations. Project or new construction quotes are restricted to the specific project quoted forthe quantities, finishes, and series of Deliverables referenced on the quote. Company reserves the right torequire proof of sale of Company products for any quoted project.b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the following: i)Stocking of the Customer’s shelves for small, quick-turn, discretionary projects, or ii) Sale to a generalcontractor or installer for new construction. Stock quotations may not be used for any project containingany Company no-substitution, specified products. Deliverables purchased under Stock Quotations cannotbe redistributed to other Customer branch locations or re-sold to other resellers or used for aftermarket sales,end-user annual contracts or sold over the counter to any walk in trade.c. General. All quotes are subject to this Agreement, unless otherwise specified by Company, and aresubject to change at any time prior to Company’s acceptance of a purchase order referencing the applicablequote number. Company, its representatives and employees reserve the right, in their sole discretion andfor any reason, to refuse a Customer’s request to quote a price other than the standard list price, regardlessof whether Company or its representatives or employees have previously quoted discounted prices to theCustomer on some or all of its orders. Customer’s failure to comply with this Section 4 will be considered amaterial breach of this Agreement, and will entitle Company to immediately terminate this Agreement and/or Customer’s ability to distribute Company’s products.5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase moneysecurity interest and lien on any and all of Customer’s rights, title and interest in each Deliverable soldby Company to Customer, wherever located, until the invoice for the applicable Deliverable(s) is paid infull, including any late charges and costs of collection. Customer authorizes Company to, and will assistCompany in, taking all necessary steps to perfect and maintain Company’s interest in such Deliverables.6. CREDIT TERMS. Unless Customer pre-pays all of its purchase orders in advance, its purchase orderswill be subject to the credit limit and other terms of credit (“Credit Terms”) set forth in Company’s creditapplication, which Credit Terms Customer acknowledges are subject to change by Company at any time.Company reserves the right to request payment in advance of shipment or any order or to request adequateassurances for Customer’s payment of an order and may withhold or stop shipment, without any liability toCompany, until Customer submits payment or adequate assurance of payment.7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company products insupport of Company-written specifications and will maintain sufficient inventory to adequately support EndUsers, installers, and/or general contractors’ needs. Customer will adhere to any MSRP or resale pricingprograms of Company, and will not resell Company’s products to a reseller or third-party for a price lowerthan Customer’s buy program acquisition cost, unless authorized to do so in writing by Company. Failureto comply with this provision will be considered a material breach of this Agreement, and will entitleCompany to immediately terminate this Agreement and/or Customer’s ability to distribute Company’sproducts. Customer shall, at its own expense, gain and maintain sufficient knowledge of the industry andproducts competitive with Deliverables so as to be able to (a) explain in detail to End Users, installers, and/or general contractors the differences between the Deliverables and competing products, (b) ensure thatan adequate number of trained, capable and qualified technical personnel with sufficient knowledge of theDeliverables and who have obtained all necessary licenses and permits are available to assist End Users,installers, and/or general contractors, and (c) respond to such End Users, installers, and/or general contractorswith respect to the general operation and use of the Deliverables including, but not limited to, (1) actingas a liaison between the End Users, installers and/or general contractors and Company in matters requiringCompany participation, (2) providing general product information and configuration support on standardprotocols and features, (3) collecting relevant technical problem identification information, and (4) postingand distributing any warranty information concerning the Products in accordance with Company’s instructions.Customer is responsible for all service and support resulting from the re-sale of any Deliverable toEnd-Users, installers and/or general contractors, examples of which may include, but are not limited to, supportactivities such as installation, initialization, software set-up, training, trouble-shooting, technical supportand field service. In the event Customer is unwilling or unable to perform said support activities, Companyreserves the right to recover from Customer any and all expenses incurred by Company to resolve the aforementionedEnd-User, installer and/or general contractor issues. Technical product training is recommendedfor Customer in order to fully service and support Deliverables purchased from Company that are resold toEnd-Users, installers and/or general contractors.8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase order orother contract with Company, Company shall have the right, in addition to all other legal remedies andwithout prejudice to any of its right hereunder, to defer further shipments under that or any other purchaseorder until such default is corrected and to declare all outstanding bills of Customer to be immediately dueand payable.9. INSPECTION AND DELIVERY.a. Inspection. Customer will inspect all Deliverables immediately after receiving them. Customer willbe deemed to have accepted the Deliverables unless Customer notifies Company in writing of any nonconformancewithin 10 days of delivery and provides Company written evidence reasonably documenting thatnonconformance. Inspection of Deliverables at Company's facility is not permitted.b. Delivery. Delivery schedules for Deliverables are based upon current production capacities, materialor component availability, and inventory, and may be changed by Company as conditions require. Deliveryschedules for services are based upon Company’s prompt receipt of, and prompt access to, Customer’sequipment and all information necessary to complete the services. In no event will any delivery date beconstrued as falling within the meaning of “time is of the essence.” Partial delivery shall be accepted byCustomer and paid for at the price and on the terms stated herein. Any partial delivery shall constitute aseparate sale, and payment shall be separately made when due. If any part of a delivery hereunder is notdelivered by Company in accordance with Customer’s purchase order, this Agreement shall not be affectedthereby.10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customer islocated in the United States, all Deliverables will be sold “Uniform Commercial Code, FOB Origin,Company's factory”; and (ii) where the Customer is located outside of the United States, all Products willbe sold “Ex-works, Company's factory (<strong>Inc</strong>oterms 2010).” In either instance, title and risk of loss will passto Customer upon delivery to the carrier at Company's factory, provided, however, as set forth herein,Company shall retain a security interest in the Deliverables until full payment has been made therefore,and Customer agrees, upon request, to do all things and acts necessary to protect Company’s interest byadequately insuring the Deliverables against loss or damage from any cause and to have Company named asan additional insured. Customer will promptly provide Company with a copy of the relevant certificate ofinsurance upon Company’s request.11. SHIPPING & SHIPPING PROGRAMS.a. Freight Charges. Company will ship all Deliverables in accordance with Company’s freight shipmentguidelines, which are set forth on the Ingersoll Rand customer website (“Freight Shipping Guidelines”),WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN.b. Rush Charges. Expedited order options are available as set forth in Company’s freight shipping guidelines.c. Packing and Marking. Company will pack, mark, and ship Deliverables according to its standardprocedures for shipment, unless the parties agree, in writing, that Company will comply with any specialinstructions provided by Customer. Special instructions may result in an increased price.d. International Shipments. For all international orders, a Shipper’s letter of instruction must be submittedin writing with the order. Failure to do so will result in the order being rejected. Complete adherence tothis order requirement will be strictly enforced. Company will not be held liable for any charges resultingfrom delays due to lack of complete required information being supplied.e. Once received by the Company, a purchase order cannot be combined with any other order to qualify13-3/14<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
for freight allowances. In addition, Customer may not combine any Company brands or product categorieson a single order to meet the applicable net freight allowance, except in the case of: i) FastTrack 24Hour/5 Day Program, which is available for Schlage, Von Duprin, LCN and Glynn-Johnson products;ii) FastTrack 24 Hour/3 Day Program, which is available for Falcon Locks, Exits and Closers and <strong>Ives</strong>products. When an order includes products from the brands listed in both (i) and (ii) above, the orderwill automatically default to the FastTrack 24 Hour/5 Day Program lead times and freight allowance.12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims for pricesmust be submitted within thirty (30) days from the date of invoice; (ii) All claims regarding Deliverablequantity or incorrect orders must be submitted within ten (10) days from the date of delivery; (iii) Allclaims for damage to Deliverables (while in the care, custody, and control of Company) must be submittedwithin thirty (30) days from the date of invoice; (iv) All claims for loss or damage to Deliverableswhile in the care, custody, and/or control of a carrier will be the responsibility of Customer, unless otherwiseagreed by the parties.13. PRODUCT CHANGES. Company’s policy is one of ongoing update and revision, accordinglyCompany reserves the right to change, without notice, the design of, or the process of manufacturing, theDeliverables covered by this Agreement.14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable inany manner contrary to the manner in which the Deliverable is intended to be used; and/or (ii) not tomodify the design of any Deliverable for use with another product without the prior written consent ofCompany.15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables that arecorrectly furnished by Company per the purchase order may not be returned unless Customer receiveswritten authorization from Company. If returns are authorized by Company, a return merchandiseauthorization (“RMA”) number must be provided by Company. Deliverables identified under suchRMA must be returned to Company within 90 days of issuance of the RMA. Such RMA number andany accompanying RMA documents, the original invoice number, and a written explanation for thereturn must be included with the returned Deliverables in order for Company to inspect and approve acredit for the return. For warranty returns, a credit in the amount of the original purchase price will onlybe issued if, after Company’s receipt and inspection of the returned Deliverables, Company confirms,in its sole discretion, the defect is valid and approves the return. For non-warranty returns, (a) in theevent Company approves such a return, a credit will be made to Customer’s account in the amount ofthe original purchase price less freight and a handling charge of 35% of the net material on the originalinvoice; and (b) Only Deliverables that are new, current, standard, non-obsolete, non-specially manufactured,unused, in their original condition as at the time of sale by Company to Customer, in their originalpackaging and in Customer’s inventory less than 180 days from the date of shipment by the Companymay be considered by Company for return. Such credit will only be issued if, after Company’s receiptand inspection of Deliverables, Company approves the return. The amount of final credit will be determinedupon receipt at the factory and following Company’s inspection and analysis of the condition ofthe returned material. Company retains the right to deny credit to anyone for any reason.16. CONFIDENTIAL INFORMATION.a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of theCompany except for the purpose of performing its obligations under this Agreement or exercisingthe rights granted herein (the “Purpose”). Customer shall protect Confidential Information of theCompany from disclosure and unauthorized use in the same manner that it protects its own ConfidentialInformation, but in no event shall such standard of care be less than reasonable care. Customer maydisclose Confidential Information of the Company only to its employees who require such informationfor the Purpose and who are subject to confidentiality obligations at least as protective as those set forthherein.b. Proprietary Information and Advice. (a) All designs, data, and specifications provided byCompany are proprietary and may not be disclosed or reused by Customer without the prior writtenconsent of Company; (b) Company assumes no obligation or liability for any advice given by Company,the results obtained, or damages incurred as a result of such advice, and all such advice is given andaccepted at Customer’s risk.c. Return. Upon the termination or expiration of this Agreement or upon the request of the Company,the Customer agrees to end all further use of, to immediately return to the Company the original versionof, and to delete or destroy all copies of, any and all Confidential Information of the Company.17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to (a) useCompany’s name in any form of publicity; or (b) use, create, register or market, directly or indirectly, inwhole or in part, Company’s names, logos, brands, or any other trademarks, or names that are now ormay hereafter be owned by Company, as part of Customer’s corporate or business name, as part of aninternet domain name, uniform resource locator (URL), or in any way connected with Customer’s business,trade address or other designations. Upon termination of this Agreement, any use of Company’strademarks or names will be immediately discontinued.18. LIMITED WARRANTY.COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED INCOMPANY’S LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY ACCEPTSEACH APPLICABLE PURCHASE ORDER (“LIMITED WARRANTY”). THE LIMITEDWARRANTY MAY BE FOUND IN THE APPLICABLE PRICE BOOK AND ON THEINGERSOLL RAND CUSTOMER WEBSITE, WHICH TERMS ARE EXPRESSLYINCORPORATED HEREIN BY REFERENCE. COMPANY WILL MAIL CUSTOMER AHARD COPY OF THIS WARRANTY UPON CUSTOMER’S WRITTEN REQUEST. INTHE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE NOT FURNISHEDBY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO CUSTOMERTHAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL ANDWORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF SHIPMENT OFTHE DELIVERABLES. COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTYIS LIMITED TO REPAIRING OR REPLACING, AT COMPANY’S OPTION, THEDEFECTIVE DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE DEFECT ORNONCONFORMANCE IS PROVIDED BY CUSTOMER WITHIN 30 DAYS OF DISCOVERYOF THE DEFECT OR NONCONFORMANCE. COMPANY DISCLAIMS ALL OTHERWARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE DELIVERABLES,INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE.a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables that: (A) arenot the proper size for the application; (B) are not installed in accordance with Company’s publishedinstallation instructions; (C) are installed with improper or incorrect parts and/or are used for purposesfor which they are not designed or intended; (D) have been repaired or altered without the Company’sprior written consent; (E) have been subjected to misuse, abuse, negligence or accident; (F) have beenimproperly stored, installed, maintained or operated; (G) have been used in violation of written instructionsprovided by Company to Customer; (H) have been subjected to improper temperature, humidity,or other environmental conditions, or (I) have been affected by normal wear and tear. In addition, theprovisions of this Limited Warranty do not apply to any defects or issues with the design or performanceof equipment or products not manufactured by Company, nor does it apply to any code compliance orpermit requirements for the assembly, installation, erection or construction of any goods. Companyis not responsible for loss or damage resulting from use of Deliverables in conjunction with parts orsystems not manufactured by Company. Accessories or products furnished by the Company, but manufacturedby others, shall carry whatever warranty the manufacturers have conveyed to the Company andwhich can be passed to Customer.b. Services. Company warrants that its services will be free from defects in material and workmanshipfor a period of 12 months from the date of completion of the particular items of service.Company’s sole obligation under this service warranty is limited to repair or reperformance, at its optionof the service, provided however, if repair or reperformance is either impractical or impossible, theCompany will refund to Customer that portion of the price paid to Company for any defective service,provided written notice of the defect or nonconformance is provided by Customer within 30 days ofdiscovery of the nonconformance.c. Notification. Customer agrees to immediately notify Company in writing if any claim is madeagainst Customer for any damages caused by any modules, parts, products, service or other Deliverableswhich may be the direct result of any defect in the manufacture of such aforementioned products.Customer agrees to cooperate with Company and its counsel in the defense of such claim and Customeragrees not to settle such claim without Company’s written consent. If Customer fails to notify Companyof such claim or fails to cooperate in such defense as aforesaid, then Company shall be discharged fromany obligations under this Section and shall have no further liability to Customer.d. Exceptions. The following costs and expenses are not covered by the provisions of these limitedwarranties: (i) labor costs for the removal and reinstallation of Deliverables or other manufacturer’sproducts; (ii) shipping and freight expenses required to return Deliverables to Company; (iii) normalmaintenance; and (iv) economic losses. In addition, the provisions of this warranty are not applicable toanything other than defects in Company’s material (products only) or workmanship.19. LIMITATION OF REMEDIES.CUSTOMER'S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECTOF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO(A) SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECUREREPAIR OR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUNDOF THE PRICE PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’SOPTION. IN NO EVENT WILL THE COMPANY'S MAXIMUM LIABILITY EXCEEDTHE SELLING PRICE FOR THE DELIVERABLE. THE WARRANTY, OBLIGATIONSAND LIABILITIES OF COMPANY (INCLUDING ITS SUPPLIERS) AND THE RIGHTSAND REMEDIES OF CUSTOMER ARE EXCLUSIVE AND ARE IN LIEU OF ANDCUSTOMER HEREBY WAIVES AND RELEASES ALL OTHER WARRANTIES,OBLIGATIONS, REPRESENTATIONS OR LIABILITIES EXPRESS OR IMPLIEDARISING BY LAW, IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICTLIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIEDWARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSEOR ANY WARRANTY IMPLIED THROUGH COURSE OF PERFORMANCE, COURSEOF DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THENEGLIGENCE OF COMPANY OR COMPANY’S SUPPLIERS OR (III) ANY OTHERCLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING FROM THEPERFORMANCE OF COMPANY OR FROM THE DESIGN, MANUFACTURE, SALE,REPAIR, LEASE OR USE OF THE DELIVERABLE, OR ANY COMPONENT THEREOF,DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.20. INDEMNIFICATION AND LIMITATION OF LIABILITY. a. Customer shall indemnify,defend and hold Company, and its officers, directors, employees, customers, Affiliates, suppliers, usersand agents, (collectively the “Indemnitees”) harmless from and against any and all damages, claims,losses, expenses, costs, obligations, liabilities, including without limiting the generality of the foregoing,liabilities for court costs and attorneys’ fees, suffered directly or indirectly by an Indemnitee byreason of, or arising out of any injury, death or loss to any person, or injury to any property (collectively,“Damages”), received or sustained by any person(s) or property, arising out of, occasioned by, attributableor related to i) any breach of any representation or warranty made by Customer, its officers, directors,employees, affiliates, users, agents, representatives or customers to Company or any third party, (ii)any failure by Customer to perform or fulfill any of its covenants, acts and/or omissions to Company orto any third party, or (iii) any litigation, proceeding or claim by any third party relating in any way to theobligations of Customer and/or the Deliverables sold by Company to Customer hereunder. Customershall not consummate any settlement of any indemnified claim without the Indemnitees’ prior writtenconsent. Customer’s obligation to indemnify Indemnitees will continue in full force and effect notwithstandingthe termination or expiration of any order under this Agreement. In any claim against anIndemnitee by an employee of Customer or any subcontractor or anyone directly or indirectly employedby any of them or anyone for whose acts they may be liable, the indemnification obligations set forth inthis Section shall not be limited in any way by or for Customer or any subcontractor under any applicableworker’s compensation act, disability or other employee benefit act. This provision shall survivetermination of any order or Agreement. IN NO EVENT WILL COMPANY, ITS OFFICERS,DIRECTORS, EMPLOYEES, CUSTOMERS, AFFILIATES, USERS AND AGENTS, (NORCOMPANY’S SUPPLIERS) BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND OR NATURE UNDERANY CIRCUMSTANCES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THEPRODUCTS, SERVICE INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, LOSSOF INTEREST, LOST GOODWILL, LOSS OF DATA, WORK STOPPAGE, IMPAIRMENTOF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR NON-OPERATION,INCREASED EXPENSES OF OPERATION, OR CLAIMS OF CUSTOMER'S CUSTOMERS,OR ANY OTHER LOSSES OR DAMAGES ARISING OUT OF ANY LACK OR LOSS OFUSE OF THE DELIVERABLES WHETHER BASED ON CONTRACT, WARRANTY, TORT(INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE), PATENTINFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCHDAMAGES.b) INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or warranty tothe Customer that the Deliverables shall not infringe any intellectual property rights including, withoutlimitations, claims arising from patent, copyright, trademark, trade secret, or other intellectual propertyinfringement. Customer agrees to hold Company harmless from and defend the Company against anysuch claim of intellectual property infringement, including any Damages resulting from that claim, thecost of complying with any preliminary or permanent injunction, and all other costs of defense (includingthe attorneys’ fees and costs), in connection with the foregoing.c) To the extent that applicable law does not permit any limitations set out in this Agreement, suchlimitation shall not be applied or invoked. Nothing in this Agreement will be interpreted to disclaimliability of Company or the Indemnitees for gross negligence or willful misconduct. The limitations ofremedy and liability herein shall not be interpreted to affect Company’s obligations, if any, for claims for(i) property damage, (ii) personal injury, or (iii) wrongful death asserted by persons who are not partiesto or beneficiaries of this Agreement. Further, the limitations of remedy and liability herein shall not be13-3/2<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 5
interpreted to limit Company’s or Customer’s right, if permitted by applicable law, to assert a claim forcontribution among joint tortfeasors in connection with a claim by a person who is not a party to thisAgreement.21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI standardsare tested and performed by third-party independent laboratories. Any field modification or alteration ofcertified Deliverables will void certification and Company is not liable to Customer to certify any modifiedor altered Deliverable.22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OFTHIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THANONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.23. CONSUMER PRODUCTSWITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSON-MOSS WARRANTY ACT (“MMWA”), THE FOLLOWING STATEMENTS ARE MADE.(A) SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIEDWARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU; (B) IFANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED TOTHE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C) SOMESTATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL ORCONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAYNOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU SPECIFIC LEGALRIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATETO STATE.24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform itsobligations hereunder will be excused to the extent that it is caused by an event or occurrence beyondCompany’s control such as, by way of example and not by way of limitation, acts of God, acts by anygovernmental authority (whether valid or invalid), governmental laws and regulations not presentlyin effect, fires, floods, windstorms, explosions, riots, natural disasters, wars, sabotage, accidents, laborproblems (including, without limitation, lockouts, strikes, and slowdowns) at Company's facility, itssource plant or their suppliers, inability to obtain power, material, labor equipment, or transportation, orcourt injunction or order. The delivery date will be extended for a time equal to that of the delay and theschedule for Company’s performance will be deemed adjusted to that effect.25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the attachments,exhibits, webpages, or supplements specifically referenced and incorporated herein, constitute the entireagreement between Company and Customer with respect to the matters contained herein and supersedeall previous communications, representations, or agreements, either oral or written between Companyand Customer. No agreement or understanding varying or expanding this Agreement will be bindingupon either party unless it is in writing and signed by a duly authorized representative of each partyhereto.26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any agreement, orany part of an agreement or the various documents (including, but not limited to, electronic documents)between Company and Customer, unless the parties agree otherwise in writing, the various componentsof the agreements shall be given the following precedence (in descending order of precedence): a) anymaster agreement or long term agreement between Company and Customer; b) any specific terms, conditionsand/or warranties of the individual products or Deliverables; c) the terms and conditions of thisAgreement, and d) any purchase order.27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT.Customer shall furnish Company with statements evidencing Customer’s financial condition asCompany may, from time to time, reasonably request, and shall notify Company immediately of anyand all events that may have a material adverse effect on Customer’s business or financial condition.If Company determines, in its sole discretion, that Customer’s financial condition or creditworthinessis inadequate or unsatisfactory, then in addition to Company’s other rights, Company may withoutliability or penalty, take any of the following actions: (i) modify the payment terms for any outstandingand/or future purchases; (ii) cancel any previously accepted orders; (iii) delay any further shipment ofDeliverables to Customer; or (iv) any combination of the above.Company may immediately terminate an order from Customer by giving written notice to Customerin the event of the happening of any of the following or any other comparable event: (i) insolvency ofthe Customer; (ii) filing of a petition in bankruptcy by or against the Customer; (iii) appointment of areceiver or trustee for the Customer; (iv) execution of an assignment for the benefit of creditors by theCustomer, all of which will allow Company to demand reclamation of all affected orders; (v) Customerceases or threatens to cease to trade; (vi) Company determines that Customer does not meet or no longermeets the credit requirements of Company or Customer’s credit account is closed; (vii) any Customerviolation of law, specifically including, without limitation, those laws set forth in this Agreement.In the event of termination in accordance with this section, Company will not be obligated to accept anyexisting or additional orders from Customer and Company will be released from its obligation to deliverunder orders accepted prior to such termination. The rejection or termination of any order by Companywill not entitle Customer to any termination or severance compensation, or to any payment in respect toany goodwill established by Customer, or render Company liable for damages on account of the loss ofprospective profits, or on account of any loss, expenditure, investment or obligation incurred or made byCustomer.No action taken under this Section 27 by Company (nor any failure of Company to act under thisSection 27) will constitute a waiver by Company of any of its rights to enforce Customer’s obligations,including the obligation of Customer to make payments as required under this Agreement. Upon terminationof any order, all amounts owed by Customer to Company will become immediately due andpayable, whether or not otherwise then due or payable.28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all creditrisks with respect to, and for collecting payment for, all Deliverables sold to third parties (includingEnd Users, installers, and/or general contractors) whether or not Customer has made full payment toCompany for such Deliverables. The inability of Customer to collect payment for any Deliverable shallnot affect Customer’s obligation to pay Company for any Deliverable.29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to thisAgreement shall be governed by and construed according to the laws of the State of Indiana (excludingits conflict of laws principles); and not by the provisions of the 1980 United Nations Convention on theInternational Sale of Goods. Any disputes or claims shall be instituted and maintained in the courts ofthe State of Indiana. Customer consents to the exercise of jurisdiction over it by such courts and agreesthat Indiana is not an inconvenient forum for any action arising from or relating to this Agreement.Customer agrees to pay for all expenses (including, but not limited to, collection costs, court costs andattorneys’ fees) incurred by Company in enforcing the obligations of Customer under this Agreement.30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document createsan employment, partnership, joint venture, or agency relationship between Company and Customer,including that of franchisee/franchisor. No party will have any power or authority to enter into any commitmenton behalf of or otherwise bind the any other party on any matter. No employee of Customerwill be deemed to be an employee of Company. If any provision of this Agreement is deemed to createa franchise relationship or business opportunity between the Parties, then Company may terminatethis Agreement or the Parties shall negotiate in good faith to modify this Agreement so as to effect theoriginal intent of the Parties as closely as possible in a mutually acceptable manner in order that thetransactions contemplated hereby are consummated as a reseller agreement and not a franchise or businessopportunity agreement.31. SETOFF. Customer does not have the right to setoff or to back charge against any amounts whichbecome payable to Company under this Agreement or otherwise. Company will not accept responsibilityfor backcharges for the cost of material or labor by Customer or any third party.32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both partiesexpressly agree to electronic transactions and acknowledge that documents they sign electronically willbind them to the same extent as a paper signature. Customer represents and warrants to Company thatonly employees authorized to bind Customer legally shall electronically sign any document under thisAgreement. Customer shall comply with any method of electronic communication/payment processingspecified by Company, including electronic funds transfer, pay-on-receipt processes/systems, ordertransmission, releases, electronic signature, and electronic communication systems, including, withoutlimitation, the use of electronic data interchange ("EDI") portals. Notwithstanding the foregoing, e-mails,even those containing a signature block of one of Company’s representatives, shall not constitute asigned writing.33. COMPLIANCE WITH APPLICABLE LAWS.a. General. Company and Customer will comply with all applicable federal, state and municipal laws,regulations, codes, ordinances and orders that pertain to the Deliverables, including but not limited tofull compliance with any applicable provisions of The Health Insurance Portability and AccountabilityAct. Where the Customer is located outside the United States, or where the customer intends to ship theproduct outside the United States, the Customer shall be responsible for compliance with all U.S. exportlaws, and for filing all U.S. Electronic Export Information, as applicable.b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws and regulationsin performing its duties under this Agreement; (ii) it does not and shall not engage in any conductthat shall violate any applicable anti-bribery or anti-corruption laws or regulations; (iii) it (and its owners,officers, directors, employees and agents) shall not pay, offer, promise or authorize the payment of,either directly or indirectly, anything of value (including but not limited to cash, gifts and entertainment)to (a) any government official or employee of any government; (b) any official or employee of anydepartment, agency, or instrumentality of a government; (c) any employee of any corporation or entityowned or controlled by a government; (d) any family member of such officials or employees; (e) anypolitical party, party official, or political candidate; or (f) any other persons, owners, officers, directors,employees and agents of any corporation or entity; to improperly or illegally assist in obtaining or retainingbusiness (including but not limited to any contracts, avoidance of duties or reduction of tariffs, reductionof taxes or to obtain money owed, or to obtain regulatory approval) or for the purpose of causing,soliciting or inducing the sale and purchase of the Deliverables by any party, and (iv) it has full knowledgeof and will comply with the Company’s Code of Conduct for Business Partners as set forth on theIngersoll Rand customer website, WHICH IS HEREBY INCORPORATED BY REFERENCE.c. The Customer shall indemnify and hold the Company harmless from any claim, demand, expenseor cost arising from any breach of this Article.d. The Customer shall permit the Company to conduct an audit or review of the Customer’s financialbooks and records and business operations at such other times that the Company considers it necessaryto confirm compliance with this provision. Such audit may be conducted by representatives of theCompany or, at the Company’s sole discretion, by a certified public accounting firm selected by theCompany. The Customer shall cooperate with any inquiries from the Company’s Ethics & ComplianceGroup.e. A violation of this provision constitutes a material breach of this Agreement and the Company mayterminate this Agreement immediately, with no opportunity to cure, in accordance with Section 27 ofthis Agreement.f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible forobtaining or maintaining any permits for the performance of services or the verification or compliancewith any code requirements relative to the performance of services, (ii) to the extent any sale ofDeliverables pursuant to this Agreement may require approval of the U.S. Government, Company’sobligations under this Agreement are conditioned upon the grant of such approval and upon complianceby Customer with any restrictions imposed by the U.S. Government in connection with such approval,and (iii) in the event the Deliverables are to be used in a nuclear facility, the Customer shall, prior tosuch use, arrange for insurance or governmental indemnity protecting Company against liability. TheCustomer hereby releases and agrees to indemnify Company and its suppliers for any nuclear damageincluding, but not limited to, loss of use, in any manner arising out of the nuclear incident, whetheralleged to be due, in whole or in part by Company or its suppliers.g. No Inducements. Each party represents to each other that neither it nor any person acting on itsbehalf has, in contravention of any applicable law, given or offered to give or will give or offer to give,any sum of money or other material consideration to any person, directly or indirectly, as an inducementto obtain business hereunder or to influence the granting of licenses or other governmental permissionsto enter into this Agreement or perform obligations hereunder.h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies withExecutive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1 through60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C. § 4212 andapplicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING PROVISIONS AREINCORPORATED HEREIN BY REFERENCE: Executive Order 11246 and 41 CFR § 60-4.3(a);Executive Order 11701 and 41 CFR §§ 60-250.5(a), 60-300.5; Executive Order 11758 and 41 CFR §60-741.5(a); U.S. immigration laws, including the L-1 Visa Reform Act of 2004 and the H-1B VisaReform Act of 2004; and Executive Order 13496.i. Ethical Business Conduct. Customer shall adopt and comply with Company’s Business PartnerCode of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE.34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and covenants toCompany that: (a) it has the right, power, and authority to enter into this Agreement and fully performits obligations hereunder; (b) it has all necessary rights in and to its respective Content and Marks foruse within the scope of this Agreement, including the licenses granted herein; and (c) it complies, and13-3/36<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
at all times shall comply, with all laws, rules, and regulations in effect that are applicable to its performanceunder this Agreement, including obtaining all such approvals and/or permits as may be requiredhereunder.35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely based onthe representations contained herein for its own purposes and not for the benefit of any third party.36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under thisAgreement shall be in writing and delivered in person, or sent by receipted courier, express mail, e-mail,or postage prepaid certified or registered mail, addressed to the party for whom it is intended, at theaddresses set forth in this Agreement. Either party may change its address for notice by giving writtennotice to the other party. Any notice or other communication shall be deemed given no later than thedate actually received. Notice by courier, express mail, certified mail, or registered mail shall be deemedgiven on the date it is officially recorded as delivered and, in the absence of such record of delivery, itshall be rebuttably presumed to have been delivered on the third Business Day after it was deposited.Notices sent by e-mail require tangible confirmation of receipt from addressee.37. ASSIGNMENT. Customer may not assign this Agreement without the prior written consent ofCompany. Company may assign its rights and delegate its duties under this Agreement, without theprior consent of Customer, to an Affiliate, or to a third party in the event of a spin-off, merger, businesscombination, consolidation or sale of all, or substantially all, of its assets or business that are related tothis Agreement. The rights and duties in this Agreement shall bind and inure to the benefit of any suchassignee.38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or unenforceableunder any statute, regulation, ordinance, executive order, or other rule of law, that provision willbe deemed severed to the extent necessary to comply with such statute, regulation, ordinance, order, orrule. In the event such provision is deemed severed, the parties will negotiate in good faith to arrive atan alternative arrangement approximating the original business objective of the parties. The remainingterms and conditions of this Agreement will remain in effect.39. NO IMPLIED WAIVER. The failure of either party at any time to require performance by theother party of any provision of this Agreement will in no way affect the right to require such performanceat any time thereafter, nor will the waiver of either party of a breach of any provision of thisAgreement constitute a waiver of any succeeding breach of the same or any other provision.40. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal representativeof the other party. Neither party is authorized to create any obligation on behalf of the other partyincluding, but not limited to, the obligation for payment of any service or warranty obligation hereunder;(b) The rights and remedies herein reserved to Company are cumulative and additional to any otherrights and remedies provided at law or equity; (c) The official text of this Agreement is in the Englishlanguage. If this Agreement is translated into another language, the English text will govern any questionwith respect to interpretation; (d) The headings in this Agreement are for convenience of reference onlyand do not affect the meaning of this Agreement in any manner.“Customer” means the purchaser of Deliverables from Company.“Deliverables” means any good or service or both purchased by Customer from Company under theseGeneral Terms and Conditions of Sale and Service.“End Users" means the purchaser that (a) has acquired a Deliverable from Customer for (i) its ownand its Affiliate's/Affiliates' internal use and not for resale, remarketing or distribution or (ii) incorporationinto its own products and (b) is an individual or entity, other than any federal, state or local agency,office or division."IP" means all intellectual property and industrial property rights comprising or relating to/of the following:(a) Patents; (b) Trademarks; (c) internet domain names, whether or not Trademarks, registeredby any authorized private registrar or Governmental Authority, web addresses, web pages, website andURLs; (d) works of authorship, expressions, designs and design registrations, whether or not copyrightable,including copyrights and copyrightable works, software and firmware, application programminginterfaces, architecture, files, records, schematics, data, data files, and databases and other specificationsand documentation; (e) Trade Secrets; and (f) all other intellectual property and industrial property rights,and all rights, interests and protections that are associated with, equivalent or similar to, or required forthe exercise of, any of the foregoing, however arising, in each case whether registered or unregisteredand including all registrations and applications for, and renewals or extensions of, such rights or forms ofprotection pursuant to the Laws of any jurisdiction throughout in any part of the world.“Marketing Materials” means all marketing brochures, buckslips, pamphlets, emails, text, call scriptsor other material, whether in printed format, audio or audiovisual format, or in any other format, thatcontain any (i) Content relating to the Company Deliverables or (ii) Company Marks.“Marks” means collectively the domain names, trademarks, trade names, service marks, trade dress,logos, and the like used or provided by either party for use in connection with this Agreement."Patents" means all patents (including all reissues, divisionals, provisionals, continuations and continuations-in-part,re-examinations, renewals, substitutions and extensions thereof), patent applications, andother patent rights and any other Governmental Authority-issued indicia of invention ownership (includinginventor's certificates, petty patents and patent utility models).“Person” means a person or entity.“<strong>Price</strong> <strong>Book</strong>s” mean Company’s current <strong>Price</strong> <strong>Book</strong> in effect for the applicable Deliverable being purchasedby Customer."Trade Secrets" means and includes business or technical information of either party, including processes,formulas, devices, techniques, compilations and other material that a party attempts to maintain insecret and that derive commercial value for such party from not being generally known to the public orreadily ascertainable through independent development or reverse engineering.DEFINITIONS.Capitalized terms have the meanings set forth in this Section, or in the Section in which they first appearin this Agreement.“Agreement” means these Ingersoll-Rand Company, Security Technologies Sector Terms andConditions of Sale and Service, together with any applicable Ingersoll-Rand Country Supplement orRegion Supplement, and all of the documents referenced herein or therein."Affiliate" means any Person that directly or indirectly, through one or more intermediaries, controls, iscontrolled by, or is under common control with, the Company. The term "control" (including the terms"controlled by" and "under common control with") means the possession, directly or indirectly, of thepower to direct or cause the direction of the management and policies of a Person, whether through theownership of voting securities, by contract or otherwise."Business Day" means any day except Saturday, Sunday or any other day on which commercial bankslocated in the United States are authorized or required by Law to be closed for business.“Company” means Ingersoll-Rand Company, Security Technologies Sector or any subsidiary or affiliatethereof. Ingersoll-Rand and/or its subsidiary or affiliates will be severally but not jointly liable underthe Agreement.“Company Marks” refers to the Marks of Company.“Confidential Information” shall mean any and all information provided by either party to the otherparty pertaining to the disclosing party’s business. Confidential Information shall include, but not belimited to, any bitting lists, formulae for products, manufacturing processes, production techniques,packaging processes, methods, research materials, ideas, marketing plans and related materials, qualitystandards, test results and data, apparatus, engineering drawings, contract documents, computer software,hardware, or firmware, business activities information such as financial information, reports, projections,books and records, customer and supplier information, and operations, customer and supplier lists anddata, specifications, know how, and other Proprietary Information or Trade Secrets (as defined herein)that either party may furnish to the other party. Confidential Information shall not include informationthat: (a) is or becomes publicly known if such public knowledge or disclosure is not the result of anyact or failure to act on the part of the receiving party; (b) is, at the time of disclosure, already known tothe Receiving Party without utilizing the Confidential Information; (c) is information disclosed to theReceiving Party by a third party which is not to the Receiving Party’s knowledge, after inquiry of thethird party, under a duty of confidentiality to the Disclosing Party; or (d) is independently developed bythe Receiving Party without the use of Confidential Information. The Receiving Party shall have theburden of proof as to prior knowledge and absence of breach. Confidential Information may be furnishedin any tangible or intangible form including, but not limited to, writings, drawings, computer andother electronic media, logic diagrams, component specifications, graphs, prototypes, samples, or verbalcommunications and regardless of whether such information is marked or designated as “confidential.”For the avoidance of doubt, all information, knowledge or data disclosed by Company to Customer,regardless of whether disclosed in written, tangible, oral, visual or other form, including, withoutlimitation, sample products, equipment, software, or other objects or material, provided by Companyto Customer, and all information, knowledge or data which was obtained by Customer from visits toCompany’s facilities, shall be considered “Confidential Information” under this Agreement.“Content” means all information (including without limitation any text, music, sound, photographs,video, graphics, data or software), in any medium, on a particular Company Web page or Website or inMarketing Materials.13-3/4<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 7
Overhead Holders & StopsFunction & Option GuideSeries 70, 79, 81, 90, 100, 410 & 450DesignationDescriptionAvailable on these seriesHolder & Stop Functions 70 79 81 90 100 410 450H suffix Hold Open & Stop — The hold open function may beturned on or off on all models except the 410’s and 450’s.The tension on the hold open is adjustable so that onecan adjust the amount of force required to pull the doorout of hold open on all except the 81 Series. All holdersinclude the STOP function.F suffix Friction Hold Open — Multi-point hold openmechanism. Tension on hold open is adjustable.HP suffix Internal Hold Open & Stop — The hold openmechanism is contained completely within the channel.The hold open is automatic and is not field selectable oradjustable.Stop Only Functions3 3 3 333333333S suffixStop-Only — A shock-absorbing spring stops the door.3 3 3 3 3 3 3SE suffixOptionsStop-ONLY with Single Point Hold-Open ElectronicCloser — The shock-absorbing spring ground in thestandard Stop-Only holders is replaced by anadjustable fixed stop block.3 3 3 3ADJ suffixadjustable jamb bracket — This option providesfor manual setting of the degree of opening, from 85 to110 degrees. The standard jamb bracket is replaced by a12˝ track.CJ suffix Closer jamb bracket — For use with LCN 5030Closers. Specify Handing (LH or RH).J suffix ANGLE jamb bracket — An angle jamb bracket isprovided to convert standard unit to hinge side or flushtransom mounting.Door ThicknessSurface Overheads are furnished for standard 1-3/4˝ thick doors.For doors over 1-3/4˝ up to 2-1/4˝, please specify when ordering - no additional charge.Other thicknesses available, please specify when ordering - additional charge.333 3 3 3 3Overhead Holders and Stops – How to OrderExample: 70 2 H - US26D - JOverhead series (70, 79, 81, 90, 10, 41, 45)Size (1, 2, 3, 4, 5, or 6)*Function (H, F, HP, S or SE) For description of functions, refer to chart above.*Finish (US3, US4, US10, US10B, US26, US26D, US32, US32D, 652, SP4, SP10,SP28, SP313, SPBLK)Option (ADJ, CJ, J, SHIM, SNB, SOC)**Please refer to individual Overhead Series price book pages for availability of finish, size, function and options.<strong>Price</strong>s subject to change without notice8<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
Overhead Holders & Stops70 Series Heavy-Duty79 Series Extra Heavy-DutySurface Overhead Holders & StopsItem*DescriptionItem Description US32DUS10,US26DUS3, US4,US10B,US26SP28,SP4, SP10,SP313,SPBLKJ suffix (70 series)* Angle Jamb Bracket - $46 $46 $46J suffix (79 series)* Angle Jamb Bracket - 129 104 104SNB-1 suffix (70) Sex bolt (set) --- Doors up to 2˝ thick - 28 28 28SNB-2 suffix (70) Sex bolt (set) --- Doors up to 3˝ thick - 35 35 35SNB-1 suffix (79) Sex bolt (set) --- Doors up to 2˝ thick - 56 56 56SNB-2 suffix (79) Sex bolt (set) --- Doors up to 3˝ thick - 64 64 64SOC suffix (70) Pin-in-Socket Security Screws $27 - -SOC suffix (79) Pin-in-Socket Security Screws 25 - - -AJK 70* 70 Series Angle Jamb Bracket Kit - 58 58 58AJK 79* 79 Series Angle Jamb Bracket Kit - 161 130 130For Door thicknesses Over 3" - 75 75 75* Note: Angle Jamb Brackets affix to Standard Jamb Brackets to allow for flush transom.Conversion Kits are sold separately in the Parts <strong>Price</strong> List.Item Description List Add1 - 10 Units List Add to Stainless Steel (US32D) price $8111 - 25 Units List Add to Stainless Steel (US32D) price 5626 or more Units List Add to Stainless Steel (US32D) price 40<strong>Price</strong>s subject to change without noticeUS10,US26DUS3, US4,US10B,US26SP28,SP4, SP10,SP313,SPBLK702H 70 Series, Size 2, Hold-Open $179 $190 $169703H 70 Series, Size 3, Hold-Open 179 190 169704H 70 Series, Size 4, Hold-Open 179 190 169705H 70 Series, Size 5, Hold-Open 179 190 169706H 70 Series, Size 6, Hold-Open 179 190 169702S 70 Series, Size 2, Stop-Only 179 190 169703S 70 Series, Size 3, Stop-Only 179 190 169704S 70 Series, Size 4, Stop-Only 179 190 169705S 70 Series, Size 5, Stop-Only 179 190 169706S 70 Series, Size 6, Stop-Only 179 190 169792H 79 Series, Size 2, Hold-Open 500 506 373793H 79 Series, Size 3, Hold-Open 500 506 373794H 79 Series, Size 4, Hold-Open 500 506 373795H 79 Series, Size 5, Hold-Open 500 506 373796H 79 Series, Size 6, Hold-Open 500 506 373792S 79 Series, Size 2, Stop-Only 500 506 373793S 79 Series, Size 3, Stop-Only 500 506 373794S 79 Series, Size 4, Stop-Only 500 506 373795S 79 Series, Size 5, Stop-Only 500 506 373796S 79 Series, Size 6, Stop-Only 500 506 373*For help in determining the size, please see chart below.Options and AccessoriesOptional Finishes – RAL Powder-Coat Finish (For information on available colors, consult factory)List Add70 & 79 Series Sizing Chart – This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details,consult Glynn-Johnson’s Technical Support.Opening size with doors hung with:Series & Size Butts / Offset Pivots Center Pivots702 & 792 23-1/16˝-27˝ 27-1/16˝-33˝703 & 793 27-1/16˝-33˝ 33-1/16˝-39˝704 & 794 33-1/16˝-39˝ 39-1/16˝-45˝705 & 795 39-1/16˝-45˝ 45-1/16˝-51˝706 & 796 45-1/16˝-54˝ 51-1/16˝-59˝<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 9
Overhead Holders & Stops81 Series Heavy-Duty SurfaceOverhead Holders & Stops(Formerly 80 Series)Item* Description US32DUS4, US10,US10BUS3,US32 652813H 81 Series, Size 3, Hold-Open $273 $311 $324 $231814H 81 Series, Size 4, Hold-Open 273 311 324 231815H 81 Series, Size 5, Hold-Open 273 311 324 231816H 81 Series, Size 6, Hold-Open 273 311 324 231813S 81 Series, Size 3, Stop-Only 238 274 287 200814S 81 Series, Size 4, Stop-Only 238 274 287 200815S 81 Series, Size 5, Stop-Only 238 274 287 200816S 81 Series, Size 6, Stop-Only 238 274 287 200* For help in determining size, please see chart below.Options and AccessoriesItem*DescriptionList AddAll FinishesJ suffix Angle Jamb Bracket $37SHIM-1 suffix 1/4˝ Shim for Blade Stop Mounting 19SHIM-2 suffix 1/2˝ Shim for Blade Stop Mounting 26SHIM-3 suffix 3/4˝ Shim for Blade Stop Mounting 39SOC suffix Pin-in-Socket Security Screws 21AJK 81* Angle Jamb Bracket Kit 46SHK 81-1 1/4˝ Shim Kit for Blade Stop Mounting 19SHK 81-2 1/2˝ Shim Kit for Blade Stop Mounting 26SHK 81-3 3/4˝ Shim Kit for Blade Stop Mounting 39For Door Thickness over 2 1/4˝ 69* Note: Angle Jamb Brackets affix to Standard Jamb Brackets to allow for flush transom or hinge side mounting (stop-only models).Conversion Kits are sold separately in the Parts <strong>Price</strong> List.81 Series Sizing Chart – This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details,consult Glynn-Johnson’s Technical Support.Opening size with doors hung with:Series & Size Butts / Offset Pivots Center Pivots813 27-1/16"-33" 33-1/16"-39"814 33-1/16"-39" 39-1/16"-45"815 39-1/16"-45" 45-1/16"-51"816 45-1/16"-54" 51-1/16"-59"<strong>Price</strong>s subject to change without notice10<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
Overhead Holders & Stops90 Series Heavy-Duty SurfaceOverhead Holders & StopsItem* Description US32DUS4,US10US3,US32 US10B 652902H 90 Series, Size 2, Hold-Open $268 $283 $311 $299 $197 $166903H 90 Series, Size 3, Hold-Open 268 283 311 299 197 166904H 90 Series, Size 4, Hold-Open 268 283 311 299 197 166905H 90 Series, Size 5, Hold-Open 268 283 311 299 197 166906H 90 Series, Size 6, Hold-Open 268 283 311 299 197 166902S 90 Series, Size 2, Stop-Only 268 283 311 299 197 166903S 90 Series, Size 3, Stop-Only 268 283 311 299 197 166904S 90 Series, Size 4, Stop-Only 268 283 311 299 197 166905S 90 Series, Size 5, Stop-Only 268 283 311 299 197 166906S 90 Series, Size 6, Stop-Only 268 283 311 299 197 166902F 90 Series, Size 2, Friction Hold-Open 268 283 311 299 197 166903F 90 Series, Size 3, Friction Hold-Open 268 283 311 299 197 166904F 90 Series, Size 4, Friction Hold-Open 268 283 311 299 197 166905F 90 Series, Size 5, Friction Hold-Open 268 283 311 299 197 166906F 90 Series, Size 6, Friction Hold-Open 268 283 311 299 197 166* For help in determining size, please see chart below.Options and AccessoriesItem*DescriptionSP28,SP4,SP10,SP313,SPBLKList AddAll FinishesSE suffix Stop-Only function for use with Single Point Hold-Open Electronic Closers $38J suffix* Angle Jamb Bracket 37SHIM-1 suffix 1/4˝ Shim for Blade Stop Mounting 24SHIM-2 suffix 1/2˝ Shim for Blade Stop Mounting 32SHIM-3 suffix 3/4˝ Shim for Blade Stop Mounting 49SOC suffix Pin-in-Socket Security Screws 21AJK90* Angle Jamb Bracket Kit 46SHK 90-1 1/4˝ Shim Kit for Blade Stop Mounting 24SHK 90-2 1/2˝ Shim Kit for Blade Stop Mounting 32SHK 90-3 3/4˝ Shim Kit for Blade Stop Mounting 49For Door thickness over 2 1/4˝ 73* Note: Angle Jamb Brackets affix to Standard Jamb Brackets to allow for flush transom.Conversion Kits are sold separately in the Parts <strong>Price</strong> List.Optional Finishes – RAL Powder-Coat Finish (For information on available colors, consult factory)Item Description List Add1 - 10 Units List Add to Stainless Steel (US32D) price $8111 - 25 Units List Add to Stainless Steel (US32D) price 5626 or more Units List Add to Stainless Steel (US32D) price 4090 Series Sizing Chart – This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details, consultGlynn-Johnson’s Technical Support.Opening size with doors hung with:Series & Size Butts / Offset Pivots Center Pivots902 23-1/16"-27" 27-1/16"-33"903 27-1/16"-33" 33-1/16"-39"904 33-1/16"-39" 39-1/16"-45"905 39-1/16"-45" 45-1/16"-51"906 45-1/16"-54" 51-1/16"-59"<strong>Price</strong>s subject to change without notice<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 11
Overhead Holders & Stops100 Series Heavy-Duty SurfaceConcealed Overhead Holders & StopsItem* Description US32D US10US4,US10B101H, 102H 100 Series, Size 1 or 2, Hold-Open $259 $272 $275 $290 $258103H, 104H 100 Series, Size 3 or 4, Hold-Open 259 272 275 290 258105H, 106H 100 Series, Size 5 or 6, Hold-Open 259 272 275 290 258101S, 102S 100 Series, Size 1 or 2, Stop-Only 259 272 275 290 258103S, 104S 100 Series, Size 3 or 4, Stop-Only 259 272 275 290 258105S, 106S 100 Series, Size 5 or 6, Stop-Only 259 272 275 290 258101F, 102F 100 Series, Size 1 or 2, Friction Hold-Open 259 272 275 290 258103F, 104F 100 Series, Size 3 or 4, Friction Hold-Open 259 272 275 290 258105F, 106F 100 Series, Size 5 or 6, Friction Hold-Open 259 272 275 290 258101HP, 102HP 100 Series, Size 1 or 2, Internal Hold-Open 259 272 275 290 258103HP, 104HP 100 Series, Size 3 or 4, Internal Hold-Open 259 272 275 290 258105HP, 106HP 100 Series, Size 5 or 6, Internal Hold-Open 259 272 275 290 258* For help in determining size, please see chart below.Options and AccessoriesItem Description US32D US10Conversion Kits sold separately in the Parts <strong>Price</strong> List.List AddUS4,US10BSE suffixStop-Only function for use with Single Point Hold-OpenElectronic Closers.$22 $22 $22 $22 $22ADJ suffixAdjustable Jamb Bracket Available on models 103-106(Allows for field adjustment of Hold-Open 85-110 52 52 52 52 45degrees)CJ suffixSpecial Jamb Bracket for use with LCN 5030 Closers.Specify Handing.42 42 42 42 42SOC suffix Pin-in-Socket Security Screws 9.00 9.00 9.00 9.00 9.00SOC suffix (ADJ) Pin-in-Socket Security Screws 9.00 9.00 9.00 9.00 9.00US3,US32US3,US32SP28,SP4,SP10,SP313,SPBLKSP28,SP4,SP10,SP313,SPBLKOptional Finishes – RAL Powder-Coat Finish (For information on available colors, consult factory)Item Description List Add1 - 10 Units List Add to Stainless Steel (US32D) price $8211 - 25 Units List Add to Stainless Steel (US32D) price 5626 or more Units List Add to Stainless Steel (US32D) price 40100 Series Sizing Chart – This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details, consultGlynn-Johnson’s Technical Support.Opening size with doors hung with:Series & Size Butts / Offset Pivots Center Pivots101 18"-23" Not Available102 23-1/16"-27" Not Available103 27-1/16"-33" 33-1/16"-39"104 33-1/16"-39" 39-1/16"-45"105 39-1/16"-45" 45-1/16"-51"106 45-1/16"-54" 51-1/16"-59"<strong>Price</strong>s subject to change without notice12<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
Overhead Holders & Stops410 Series Medium-Duty ConcealedOverhead Holders & StopsItem* Description US32DUS4,US10US3,US32 US10B 652411H 410 Series, Size 1, Hold-Open $97 $107 $115 $108 $82 $75412H 410 Series, Size 2, Hold-Open 97 107 115 108 82 75413H 410 Series, Size 3, Hold-Open 97 107 115 108 82 75414H 410 Series, Size 4, Hold-Open 97 107 115 108 82 75415H 410 Series, Size 5, Hold-Open 97 107 115 108 82 75411S 410 Series, Size 1, Stop-Only 97 107 115 108 82 75412S 410 Series, Size 2, Stop-Only 97 107 115 108 82 75413S 410 Series, Size 3, Stop-Only 97 107 115 108 82 75414S 410 Series, Size 4, Stop-Only 97 107 115 108 82 75415S 410 Series, Size 5, Stop-Only 97 107 115 108 82 75411F 410 Series, Size 1, Friction Hold-Open 97 107 115 108 82 75412F 410 Series, Size 2, Friction Hold-Open 97 107 115 108 82 75413F 410 Series, Size 3, Friction Hold-Open 97 107 115 108 82 75414F 410 Series, Size 4, Friction Hold-Open 97 107 115 108 82 75415F 410 Series, Size 5, Friction Hold-Open 97 107 115 108 82 75* For help in determining size, please see chart below.SP28,SP4,SP10,SP313,SPBLKOptions and AccessoriesItemDescriptionList AddAll FinishesSE suffix Stop-Only function for use with Single Point Hold-Open Electronic Closers $18SOC suffix Pin-in-Socket Security Screws 14Conversion Kits are sold separately in the Parts <strong>Price</strong> List.Optional Finishes – RAL Powder-Coat Finish (For information on available colors, consult factory)Item Description List Add1 - 10 Units List Add to Stainless Steel (US32D) price $8111 - 25 Units List Add to Stainless Steel (US32D) price 5626 or more Units List Add to Stainless Steel (US32D) price 40410 Series Sizing Chart – This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details, consultGlynn-Johnson’s Technical Support.Series & Size Butts / Offset Pivots Center Pivots411 18"-23" Not Available412 23-1/16"-27" Not Available413 27-1/16"-33" 33-1/16"-39"414 33-1/16"-39" 39-1/16"-45"415 39-1/16"-45" 45-1/16"-51"<strong>Price</strong>s subject to change without notice<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 13
Overhead Holders & Stops450 Series Medium-Duty SurfaceOverhead Holders & StopsItem* Description US32DUS4,US10US3,US32 US10B 652451H 450 Series, Size 1, Hold-Open $119 $128 $145 $132 $91 $79452H 450 Series, Size 2, Hold-Open 119 128 145 132 91 79453H 450 Series, Size 3, Hold-Open 119 128 145 132 91 79454H 450 Series, Size 4, Hold-Open 119 128 145 132 91 79455H 450 Series, Size 5, Hold-Open 119 128 145 132 91 79451S 450 Series, Size 1, Stop-Only 119 128 145 132 91 79452S 450 Series, Size 2, Stop-Only 119 128 145 132 91 79453S 450 Series, Size 3, Stop-Only 119 128 145 132 91 79454S 450 Series, Size 4, Stop-Only 119 128 145 132 91 79455S 450 Series, Size 5, Stop-Only 119 128 145 132 91 79451F 450 Series, Size 1, Friction Hold-Open 119 128 145 132 91 79452F 450 Series, Size 2, Friction Hold-Open 119 128 145 132 91 79453F 450 Series, Size 3, Friction Hold-Open 119 128 145 132 91 79454F 450 Series, Size 4, Friction Hold-Open 119 128 145 132 91 79455F 450 Series, Size 5, Friction Hold-Open 119 128 145 132 91 79* For help in determining size, please see chart below.Options and AccessoriesItemDescriptionSP28,SP4,SP10,SP313,SPBLKList AddAll FinishesSE suffix Stop-Only function for use with Single Point Hold-Open Electronic Closers $18J suffix* Angle Jamb Bracket 33SHIM-1 suffix 3/16˝ Shim Kit for Blade Stop Mounting 14SHIM-2 suffix 3/8˝ Shim Kit for Blade Stop Mounting 23SHIM-3 suffix 9/16˝ Shim Kit for Blade Stop Mounting 30SOC suffix Pin-in-Socket Security Screws 211-3/8˝ Dr Thickness Mounting Package for 1-3/8˝ Door 322-1/4˝ Dr Thickness Mounting Package for up to 2-1/4˝ Door 18For Door Thickness over 2 1/4" 75AJK 450* 450 Series Angle Jamb Bracket Kit 41SHK 450-1 3/16˝ Shim Kit for Blade Stop Mounting 14SHK 450-2 3/8˝ Shim Kit for Blade Stop Mounting 23SHK 450-3 9/16˝ Shim Kit for Blade Stop Mounting 30* Note: Angle Jamb Brackets affix to Standard Jamb Brackets to allow for flush transom or hinge side mounting.Conversion Kits are sold separately in the Parts <strong>Price</strong> List.Optional Finishes – RAL Powder-Coat Finish (For information on available colors, consult factory)Item Description List Add1 - 10 Units List Add to Stainless Steel (US32D) price $8111 - 25 Units List Add to Stainless Steel (US32D) price 5626 or more Units List Add to Stainless Steel (US32D) price 40450 Series Sizing Chart – This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details, consultGlynn-Johnson’s Technical Support.Series & Size Butts / Offset Pivots Center Pivots451 18˝-23˝ 23-1/16˝-27˝452 23-1/16˝-27˝ 27-1/16˝-33˝453 27-1/16˝-33˝ 33-1/16˝-39˝454 33-1/16˝-39˝ 39-1/16˝-45˝455 39-1/16˝-45˝ 45-1/16˝-51˝<strong>Price</strong>s subject to change without notice14<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
Sensaguard280 Series SensaguardStand Alone Holder/Release Smoke DetectorItem Description US28 313AN280 Sensaguard Stand Alone Holder/Release Smoke Detector $780 $810• Battery Operated Hold-Open/Release• Built-in Smoke Detector• Non-Handed -- Mounts on Push or Pull Side of Door• Fits Doors 30˝ and LargerOptionsItem Description All FinishesSOC suffix Pin-in-Socket Security Screws $20<strong>Price</strong>s subject to change without notice<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 15
Push/Pull LatchesHL6 Push/Pull Latch andPL7 and PL8 Privacy Function Push/Pull LatchItem* Description US26D US32D US26 US32HL6-2 Push/Pull Latch - 2-3/4˝ Backset $299 $346 $371 $367 $354 $379HL6-3 Push/Pull Latch - 3-3/4˝ Backset 299 346 371 367 354 379HL6-5 Push/Pull Latch - 5˝ Backset 299 346 371 367 354 379PL7-2 Push Side Thumbturn - 2-3/4˝ Backset 389 446 467 476 459 478PL7-3 Push Side Thumbturn - 3-3/4˝ Backset 389 446 467 476 459 478PL7-5 Push Side Thumbturn - 5˝ Backset 389 446 467 476 459 478PL8-2 Pull Side Thumbturn - 2-3/4˝ Backset 389 446 467 476 459 478PL8-3 Pull Side Thumbturn - 3-3/4˝ Backset 389 446 467 476 459 478PL8-5 Pull Side Thumbturn - 5˝ Backset 389 446 467 476 459 478OptionsItem Description List Add7" suffix 7" Backset $43A suffix ASA Strike, ANSI 115.1 (1-1/4" x 4-7/8"), when ordered with latch N/CAS suffix Both Standard & ASA Strikes 25B suffix Brass base material on US26D 47E suffix Engraved Push and Pull. (See page 16 for ordering guide) 47EN suffix Pull Only Latch List Deduct 58EO suffix Push Only Latch List Deduct 58L suffix Lead Lining 85RL suffix Roller Latch Conversion 41SOC suffix Pin-in-Socket Security Screws 25Standard HL6 with Door Thickness over 1 3/4" (Without Special Strike) 74PL7 or PL8 with Door Thickness over 1 3/4"N/AUS4,US10US3,US10BOptional Finishes – RAL Powder-Coat Finish (For information on available colors, consult factory)Item Description List Add1 - 10 Units List Add to Stainless Steel (US32D) price $7811 - 25 Units List Add to Stainless Steel (US32D) price 5626 or more Units List Add to Stainless Steel (US32D) price 39Anti-Microbial Coating is available for the HL and PL series in US26D and US32D finishes.Specify US26D-AM or US32D-AM when ordering.25Push/Pull Latches - How to OrderExample: HL6 E 4 - US26D - 2 - -Model (HL6, PL7, PL8)Option, if applicable (B, E, EN, EO, L, RL, SOC)Engraving style, if applicable, see page 18. (1, 2, 3, 4, 5, 6)Finish (US3, US4, US10, US10B, US26, US26D, US32, US32D)Backset (2=2-3/4˝, 3=3-3/4˝, 5=5˝, 7=7˝)Strike (Blank for standard, A for ASA, AS for both strikes)Door Thickness (Blank for 1-3/4˝ door, specify other thickness)<strong>Price</strong>s subject to change without notice16<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
Push/Pull Mortise Lock Combination• Schlage L Series Lock <strong>Inc</strong>luded.• Cylinders are not included and are not available through Glynn-Johnson• On functions with cylinders, handles must be mounted in down position on key side or horizontally on both sides.• On functions with thumbturns, handles must be mounted in the horizontal position.• All units 2-3/4˝ backset<strong>Price</strong>s subject to change without noticePush/Pull Latches• ASA strike furnished with all units.Model* Description US26DUS26, US10B,US3 US4, US10 US32DHL6-9010 Passage Function $826 $863 $863 $863HL6-9040* Privacy Function 863 902 902 902HL6-9050* Office/Inner Entry Function 863 902 902 902HL6-9060 Apartment Entrance Function 826 863 863 863HL6-9070 Classroom Function 826 863 863 863HL6-9080 Storeroom Function 826 863 863 863HL6-9082 Institution Function 826 863 863 863HL6-9453* Entrance Function 863 902 902 902HL6-9456* Dormitory Exit Function 863 902 902 902HL6-9465 Closet/Storeroom Function 863 902 902 902HL6-9466 Store/Utility Function 863 902 902 902HL6-9473* Dorm Bedroom Function 863 902 902 902HL6-9485* Hotel Lock Function 863 902 902 902HL6-9486* Hotel Lock Function 863 902 902 902HL6-9000RK Less Mortise Lock 354 388 388 388Note: Must specify when using with 9082EL/EU solid spindle*Thumbturn functionsOptionsItem Description List AddL suffix Lead Lining $239E suffix Engraved Push and Pull. (See page 18 for ordering guide) 47B suffix Brass base material on US26D 47SOC suffix Pin-in-Socket Security Screws 25EO suffix Push Side Only Latch List Deduct 135EN suffix Pull Side Only Latch List Deduct 135BT suffix Bent Tab for Mortise Lock Strike 543 EL/EU suffix Electric Locking or Unlocking for 9080 only 5613 EL/EU suffix Electric Locking or Unlocking for 9082 only 6253 RX suffix 9080EL/EU or 9082EL/EU 2373 Consult factory for lead time.Optional Finishes – RAL Powder-Coat Finish (For information on available colors, consult factory)Item Description List Add1 - 10 Units List Add to Stainless Steel (US32D) price $8111 - 25 Units List Add to Stainless Steel (US32D) price 5626 or more Units List Add to Stainless Steel (US32D) price 40Anti-Microbial Coating is available for the HL and PL series in US26D and US32D finishes.Specify US26D-AM or US32D-AM when ordering25Push/Pull Latches - How to OrderExample: HL6 E 2 - 9070 - US26DModel (HL6)Option, if applicable (B, E, EN, EO, L, SOC)Engraving style, if applicable, see page 18. (1, 2, 3, 4, 5, 6)Lock Function (Functions listed above or 9000RK for conversion kit)Finish (US3, US4, US10, US10B, US26, US26D, US32D)Door Thickness (Blank for 1-3/4˝ door, specify other thickness)<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 17
Push/Pull LatchesEngraving GuideMounting PositionTo Order, SpecifyPPUPU PS U S UH S PPHHSUU H SS HHPPUPU PLL U LLLL LLULL PPLLUU LL LLPush Up, Pull Down• Any backset• Non-handed• No PL7 or PL8E1PPUPU PS U S UH S PPHHSUU H SS HHPPUPU PLL U LLLL LLULL PPLLUU LL LLPush Up, Pull Up• Any Backset• Non-handedE2PUSHPUSHPUSH PUSHPUSH PUSHPUSHPULLPULLPULL PULLPULL PULLPULLHorizontal Engraving• Any Backset• RH• No PL7 or PL8E3PUSHPUSHPUSH PUSHPUSH PUSHPUSHPPUPU PS U S UH S PPHHSUU H SS HHPULLPULLPULL PULLPULL PULLPULLPPUPU PLL U LLLL LLULL PPLLUU LL LLHorizontal Engraving• Any Backset• LH• No PL7 or PL8Push Down, Pull Up• Any Backset• Non-Handed• No PL7 or PL8E4E5PPUPU PS U S UH S PPHHSHPPUPU PLL U LLLL LLULL PPLLPush Down, Pull Down• Any Backset• Non-handedE6UU LL LLUU SS HHPUSHPUSHPUSH PUSHPUSH PUSHPUSHPUSHPUSHPUSH PUSHPUSH PUSHPUSHPULLPULLPULL PULLPULL PULLPULLPULLPULLPULL PULLPULL PULLPULLHorizontal Engraving• 7˝ Backset only• RH• No Mortise Lock• No PL7 or PL8Horizontal Engraving• 7˝ Backset only• LH• No Mortise Lock• No PL7 or PL8E4E3<strong>Price</strong>s subject to change without notice18<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
Parts Table of ContentsPARTSHow to Use this Parts <strong>Price</strong> List...................................................................................................................................19Parts for 70 and 79 Series Overhead Holders & Stops....................................................................... 20-22Parts for 80/81 Series Overhead Holders & Stops.............................................................................. 22-23Parts for 90 Series Overhead Holders & Stops................................................................................... 24-25Parts for 100 Series Overhead Holders & Stops................................................................................. 26-27Parts for 410/450 Series Overhead Holders & Stops.......................................................................... 28-30Parts for 280 Sensaguard Overhead Holder...............................................................................................30Parts for HL6/PL7/PL8 Series Push/Pull Latches................................................................................. 31-36HOW TO USE THIS PARTS PRICE LISTTo find a part number and its list price:n First, start with the product where the part is used.n Next, scan the descriptions shown below the product.n Once you find the description, determine the finish, if applicable.n From there, note the part number to use when ordering. If directed, refer to the HOW TO ORDER guide usedto order most arm assemblies, channel assemblies, and handle assemblies.If you are unable to find a part, or if you already know the part number but do not know where it is being used andyou need its list price, please contact Glynn-Johnson Customer Service at the telephone number shown below.Customer Care 1-877-671-7011 Fax 1-877-424-8494 Technical Support 1-888-371-7331PLEASE NOTE: For authorized customers, please refer to <strong>Price</strong> <strong>Book</strong> forproducts available in 24-hour or 5-days. Customer Service 1-866-ICALLIR (1-866-422-5547) Fax: 1-800-288-4242<strong>Price</strong>s subject to change without notice<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 19
70 Series70 SeriesDescription Finish Part No. List <strong>Price</strong> Each70 Door Bracket & Pin US3 OHPART.10001 $62.0070 Door Bracket & Pin US4 OHPART.10002 62.0070 Door Bracket & Pin US10 OHPART.10003 52.0070 Door Bracket & Pin US10B OHPART.10004 62.0070 Door Bracket & Pin US26 OHPART.10005 62.0070 Door Bracket & Pin US26D OHPART.10006 46.0070 Door Bracket & Pin SP4 OHPART.10007 31.0070 Door Bracket & Pin SP10 OHPART.10008 31.0070 Door Bracket & Pin SP313 OHPART.10009 31.0070 Door Bracket & Pin SP28 OHPART.10010 31.0070 Door Bracket & Pin SPBLK OHPART.10011 31.0070 Jamb Bracket US3 OHPART.10012 92.0070 Jamb Bracket US4 OHPART.10013 92.0070 Jamb Bracket US10 OHPART.10014 85.0070 Jamb Bracket US10B OHPART.10015 92.0070 Jamb Bracket US26 OHPART.10016 92.0070 Jamb Bracket US26D OHPART.10017 85.0070 Jamb Bracket SP4 OHPART.10018 82.0070 Jamb Bracket SP10 OHPART.10019 82.0070 Jamb Bracket SP313 OHPART.10020 82.0070 Jamb Bracket SP28 OHPART.10021 82.0070 Jamb Bracket SPBLK OHPART.10022 82.0070 Hook Assembly - Hold Open Conversion US3 OHPART.10023 44.0070 Hook Assembly - Hold Open Conversion US4 OHPART.10024 44.0070 Hook Assembly - Hold Open Conversion US10 OHPART.10025 44.0070 Hook Assembly - Hold Open Conversion US10B OHPART.10026 44.0070 Hook Assembly - Hold Open Conversion US26 OHPART.10027 44.0070 Hook Assembly - Hold Open Conversion US26D OHPART.10028 44.0070 Hook Assembly - Hold Open Conversion SP4 OHPART.10029 44.0070 Hook Assembly - Hold Open Conversion SP10 OHPART.10030 44.0070 Hook Assembly - Hold Open Conversion SP313 OHPART.10031 44.0070 Hook Assembly - Hold Open Conversion SP28 OHPART.10032 44.0070 Hook Assembly - Hold Open Conversion SPBLK OHPART.10033 44.0070 Stop Washer - Stop Only Conversion - OHPART.10034 8.5070 Shock Spring - OHPART.10035 6.0070 Roll Pin (Pkg of 10) - OHPART.10036 6.0070 Adjustment Nut (Pkg of 10) - OHPART.10037 8.5070 Mounting Pkg US3,US4,SP4 OHPART.10038 24.0070 Mounting Pkg US10,SP10 OHPART.10039 24.0070 Mounting Pkg US10B,SP313 OHPART.10040 24.0070 Mounting Pkg US26,US26D,SP28 OHPART.10041 24.0070 Mounting Pkg SPBLK OHPART.10042 24.0070 Security Mounting Pkg - OHPART.10043 27.0070 Mounting Pkg - 2 1/4" Door US3,US4,SP4 OHPART.10044 24.0070 Mounting Pkg - 2 1/4" Door US10,SP10 OHPART.10045 24.0070 Mounting Pkg - 2 1/4" Door US10B,SP313 OHPART.10046 24.0070 Mounting Pkg - 2 1/4" Door US26,US26D,SP28 OHPART.10047 24.0070 Mounting Pkg - 2 1/4" Door SPBLK OHPART.10048 24.0070/79/81/90 Angle Screw Pkg US3,US4,SP4 OHPART.10049 8.5070/79/81/90 Angle Screw Pkg US10,SP10 OHPART.10050 8.5070/79/81/90 Angle Screw Pkg US10B,SP313 OHPART.10051 8.5070/79/81/90 Angle Screw Pkg US26,US26D,SP28 OHPART.10052 8.5070/79/81/90 Angle Screw Pkg SPBLK OHPART.10053 8.50continued on next page<strong>Price</strong>s subject to change without notice20<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
70 and 79 Series70 Series (continued)Description Finish Part No. List <strong>Price</strong> Each70 Sex Bolt Pkg, Up to 2" Door (Set of 3) US3,US4 OHPART.10054 $28.0070 Sex Bolt Pkg, Up to 2" Door (Set of 3) US10,SP10 OHPART.10055 28.0070 Sex Bolt Pkg, Up to 2" Door (Set of 3) US10B,SP313 OHPART.10056 28.0070 Sex Bolt Pkg, Up to 2" Door (Set of 3) US26,US26D OHPART.10057 28.0070 Sex Bolt Pkg, Up to 2" Door (Set of 3) SP4 OHPART.10058 28.0070 Sex Bolt Pkg, Up to 2" Door (Set of 3) SP28 OHPART.10059 28.0070 Sex Bolt Pkg, Up to 2" Door (Set of 3) SPBLK OHPART.10060 28.0070 Sex Bolt Pkg, 2" to 3" Door (Set of 3) US3,US4 OHPART.10061 35.5070 Sex Bolt Pkg, 2" to 3" Door (Set of 3) US10,SP10 OHPART.10062 35.5070 Sex Bolt Pkg, 2" to 3" Door (Set of 3) US10B,SP313 OHPART.10063 35.5070 Sex Bolt Pkg, 2" to 3" Door (Set of 3) US26,US26D OHPART.10064 35.5070 Sex Bolt Pkg, 2" to 3" Door (Set of 3) SP4 OHPART.10065 35.5070 Sex Bolt Pkg, 2" to 3" Door (Set of 3) SP28 OHPART.10066 35.5070 Sex Bolt Pkg, 2" to 3" Door (Set of 3) SPBLK OHPART.10067 35.5079 Series79 Door Bracket & Pin US3 OHPART.10101 $93.0079 Door Bracket & Pin US4 OHPART.10102 93.0079 Door Bracket & Pin US10 OHPART.10103 85.0079 Door Bracket & Pin US10B OHPART.10104 93.0079 Door Bracket & Pin US26 OHPART.10105 93.0079 Door Bracket & Pin US26D OHPART.10106 85.0079 Door Bracket & Pin SP4 OHPART.10107 53.0079 Door Bracket & Pin SP10 OHPART.10108 53.0079 Door Bracket & Pin SP313 OHPART.10109 53.0079 Door Bracket & Pin SP28 OHPART.10110 53.0079 Door Bracket & Pin SPBLK OHPART.10111 53.0079 Jamb Bracket US3 OHPART.10112 286.0079 Jamb Bracket US4 OHPART.10113 286.0079 Jamb Bracket US10 OHPART.10114 214.0079 Jamb Bracket US10B OHPART.10115 286.0079 Jamb Bracket US26 OHPART.10116 286.0079 Jamb Bracket US26D OHPART.10117 214.0079 Jamb Bracket SP4 OHPART.10118 164.0079 Jamb Bracket SP10 OHPART.10119 164.0079 Jamb Bracket SP313 OHPART.10120 164.0079 Jamb Bracket SP28 OHPART.10121 164.0079 Jamb Bracket SPBLK OHPART.10122 164.0079 Hook Assembly - Hold Open Conversion US3 OHPART.10123 77.0079 Hook Assembly - Hold Open Conversion US4 OHPART.10124 77.0079 Hook Assembly - Hold Open Conversion US10 OHPART.10125 77.0079 Hook Assembly - Hold Open Conversion US10B OHPART.10126 77.0079 Hook Assembly - Hold Open Conversion US26 OHPART.10127 77.0079 Hook Assembly - Hold Open Conversion US26D OHPART.10128 77.0079 Hook Assembly - Hold Open Conversion SP4 OHPART.10129 77.0079 Hook Assembly - Hold Open Conversion SP10 OHPART.10130 77.0079 Hook Assembly - Hold Open Conversion SP313 OHPART.10131 77.0079 Hook Assembly - Hold Open Conversion SP28 OHPART.10132 77.0079 Hook Assembly - Hold Open Conversion SPBLK OHPART.10133 77.00continued on next page<strong>Price</strong>s subject to change without notice<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 21
79, 80 and 81 Series79 Series (continued)Description Finish Part No. List <strong>Price</strong> Each79 Stop Washer - Stop Only Conversion - OHPART.10134 $8.5079 Shock Spring - OHPART.10135 8.5079 Roll Pin (Pkg of 10) - OHPART.10136 8.5079 Adjustment Nut (Pkg of 10) - OHPART.10137 18.0079 Mounting Pkg US3,US4,SP4 OHPART.10138 34.0079 Mounting Pkg US10,SP10 OHPART.10139 34.0079 Mounting Pkg US10B,SP313 OHPART.10140 34.0079 Mounting Pkg US26,US26D,SP28 OHPART.10141 34.0079 Mounting Pkg SPBLK OHPART.10142 34.0079 Security Mounting Pkg - OHPART.10143 25.0070/79/81/90 Angle Screw Pkg US3,US4,SP4 OHPART.10049 8.5070/79/81/90 Angle Screw Pkg US10,SP10 OHPART.10050 8.5070/79/81/90 Angle Screw Pkg US10B,SP313 OHPART.10051 8.5070/79/81/90 Angle Screw Pkg US26,US26D,SP28 OHPART.10052 8.5070/79/81/90 Angle Screw Pkg SPBLK OHPART.10053 8.5079 Sex Bolt Pkg, Up to 2" Door (Set of 4) US3,US4 OHPART.10144 56.0079 Sex Bolt Pkg, Up to 2" Door (Set of 4) US10,SP10 OHPART.10145 56.0079 Sex Bolt Pkg, Up to 2" Door (Set of 4) US10B,SP313 OHPART.10146 56.0079 Sex Bolt Pkg, Up to 2" Door (Set of 4) US26,US26D OHPART.10147 56.0079 Sex Bolt Pkg, Up to 2" Door (Set of 4) SP4 OHPART.10148 56.0079 Sex Bolt Pkg, Up to 2" Door (Set of 4) SP28 OHPART.10149 56.0079 Sex Bolt Pkg, Up to 2" Door (Set of 4) SPBLK OHPART.10150 56.0079 Sex Bolt Pkg, 2" to 3" Door (Set of 4) US3,US4 OHPART.10151 66.5079 Sex Bolt Pkg, 2" to 3" Door (Set of 4) US10,SP10 OHPART.10152 66.5079 Sex Bolt Pkg, 2" to 3" Door (Set of 4) US10B,SP313 OHPART.10153 66.5079 Sex Bolt Pkg, 2" to 3" Door (Set of 4) US26,US26D OHPART.10154 66.5079 Sex Bolt Pkg, 2" to 3" Door (Set of 4) SP4 OHPART.10155 66.5079 Sex Bolt Pkg, 2" to 3" Door (Set of 4) SP28 OHPART.10156 66.5079 Sex Bolt Pkg, 2" to 3" Door (Set of 4) SPBLK OHPART.10157 66.5080 and 81 Series80/81 Handle, Spring & Plunger Pkg US3 OHPART.10201 $62.0080/81 Handle, Spring & Plunger Pkg US4 OHPART.10202 57.0080/81 Handle, Spring & Plunger Pkg US10 OHPART.10203 57.0080/81 Handle, Spring & Plunger Pkg US10B OHPART.10204 57.0080/81 Handle, Spring & Plunger Pkg US32 OHPART.10205 62.0080/81 Handle, Spring & Plunger Pkg US32D,652 OHPART.10206 53.0080/81 Handle, Spring & Plunger Pkg SP4 OHPART.10207 44.0080/81 Handle, Spring & Plunger Pkg SP10 OHPART.10208 44.0080/81 Handle, Spring & Plunger Pkg SP313 OHPART.10209 44.0080/81 Handle, Spring & Plunger Pkg SP28 OHPART.10210 44.0080/81 Handle, Spring & Plunger Pkg SPBLK OHPART.10211 44.0080/81 Handle US3 OHPART.10212 57.0080/81 Handle US4 OHPART.10213 53.0080/81 Handle US10 OHPART.10214 53.0080/81 Handle US10B OHPART.10215 53.0080/81 Handle US26 OHPART.10216 57.0080/81 Handle US26D,652 OHPART.10217 46.0080/81 Handle SP4 OHPART.10218 36.0080/81 Handle SP10 OHPART.10219 36.0080/81 Handle SP313 OHPART.10220 36.0080/81 Handle SP28 OHPART.10221 36.0080/81 Handle SPBLK OHPART.10222 36.00continued on next page<strong>Price</strong>s subject to change without notice22<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
80 and 81 Series80 and 81 Series (continued)Description Finish Part No. List <strong>Price</strong> Each80/81 Plunger - OHPART.10223 $8.0080/81 Plunger Spring - OHPART.10224 6.0081 Channel US3 OHPART.10244 63.0081 Channel US4 OHPART.10245 57.0081 Channel US10 OHPART.10246 57.0081 Channel US10B OHPART.10247 57.0081 Channel US32 OHPART.10248 63.0081 Channel US32D OHPART.10249 44.0081 Channel 652 OHPART.10250 28.0081/90 End Cap - OHPART.10256 18.0081 Shock Spring - OHPART.10257 8.0080 Mounting Pkg, 1 3/4" Door US3,US4,SP4 OHPART.10226 30.0080 Mounting Pkg, 1 3/4" Door US10,SP10 OHPART.10227 30.0080 Mounting Pkg, 1 3/4" Door US10B,SP313 OHPART.10228 30.0080 Mounting Pkg, 1 3/4" Door US32,US32D,652,SP28 OHPART.10229 30.0080 Mounting Pkg, 1 3/4" Door SPBLK OHPART.10230 30.0080HD Mounting Pkg, 1 3/4" Door US3,US4,SP4 OHPART.10231 45.0080HD Mounting Pkg, 1 3/4" Door US10,SP10 OHPART.10232 45.0080HD Mounting Pkg, 1 3/4" Door US10B,SP313 OHPART.10233 45.0080HD Mounting Pkg, 1 3/4" Door US32,US32D,652,SP28 OHPART.10234 45.0080HD Mounting Pkg, 1 3/4" Door SPBLK OHPART.10235 45.0081 Mounting Pkg, Up to 2 1/4" Door US3,US4,SP4 OHPART.10236 30.0081 Mounting Pkg, Up to 2 1/4" Door US10,SP10 OHPART.10237 30.0081 Mounting Pkg, Up to 2 1/4" Door US10B,SP313 OHPART.10238 30.0081 Mounting Pkg, Up to 2 1/4" Door US32,US32D ,652 OHPART.10239 30.0081 Mounting Pkg, Up to 2 1/4" Door SPBLK OHPART.10240 30.0080 Security Mounting Pkg, 1 3/4" Door - OHPART.10241 21.0080HD Security Mounting Pkg, 1 3/4" Door - OHPART.10242 27.0081 Security Mounting Pkg, Up to 2 1/4" Door - OHPART.10243 21.0070/79/81/90 Angle Screw Pkg US3,US4,SP4 OHPART.10049 8.5070/79/81/90 Angle Screw Pkg US10,SP10 OHPART.10050 8.5070/79/81/90 Angle Screw Pkg US10B,SP313 OHPART.10051 8.5070/79/81/90 Angle Screw Pkg US32,US32D,SP28 OHPART.10052 8.5070/79/81/90 Angle Screw Pkg SPBLK OHPART.10053 8.50<strong>Price</strong>s subject to change without notice<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 23
90 Series90 SeriesHow to Order Arm AssemblySize - 2, 3, 4, 5, 6Function -H (Hold Open), S (Stop Only),F (Friction Hold Open), SE (Stop Only)Finish - US3, US4, US10, US10B, US32, US32D, 652SP4, SP10, SP313, SP28, SPBLKARM90 4 H – US3Description Finish List <strong>Price</strong> Each90 Arm Assembly US3 $206.0090 Arm Assembly US4 188.0090 Arm Assembly US10 188.0090 Arm Assembly US10B 200.0090 Arm Assembly US32 206.0090 Arm Assembly US32D 179.0090 Arm Assembly 652 133.0090 Arm Assembly SP4 114.0090 Arm Assembly SP10 114.0090 Arm Assembly SP313 114.0090 Arm Assembly SP28 114.0090 Arm Assembly SPBLK 114.0090 SeriesHow to Order Channel AssemblySize - 2, 3, 4, 5, 6Function -H (Hold Open), S (Stop Only),F (Friction Hold Open), SE (Stop Only)Finish - US3, US4, US10, US10B, US32, US32D, 652SP4, SP10, SP313, SP28, SPBLKCHANNEL 90 4 H – US3Description Finish List <strong>Price</strong> Each90 Channel Assembly - H, S or F US3 $246.0090 Channel Assembly - H,S or F US4 220.0090 Channel Assembly - H, S or F US10 220.0090 Channel Assembly - H,S or F US10B 234.0090 Channel Assembly - H, S or F US32 246.0090 Channel Assembly - H,S or F US32D 214.0090 Channel Assembly - H, S or F 652 159.0090 Channel Assembly - H,S or F SP4 133.0090 Channel Assembly - H, S or F SP10 133.0090 Channel Assembly - H,S or F SP313 133.0090 Channel Assembly - H, S or F SP28 133.0090 Channel Assembly - H,S or F SPBLK 133.00continued on next page<strong>Price</strong>s subject to change without notice24<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
90 Series90 Series (continued)Description Finish Part No. List <strong>Price</strong> Each90 Channel Assembly - SE US3 $295.0090 Channel Assembly - SE US4 269.0090 Channel Assembly - SE US10 269.0090 Channel Assembly - SE US10B 283.0090 Channel Assembly - SE US32 295.0090 Channel Assembly - SE US32D 263.0090 Channel Assembly - SE 652 208.0090 Channel Assembly - SE SP4 182.0090 Channel Assembly - SE SP10 182.0090 Channel Assembly - SE SP313 182.0090 Channel Assembly - SE SP28 182.0090 Channel Assembly - SE SPBLK 182.00u 90 Old Style End Cap SPBLK OHPART.10306 18.00u 90 Old Style End Cap & Spring Assembly US3,US4,SP4 OHPART.10307 24.00u 90 Old Style End Cap & Spring Assembly US10,SP10 OHPART.10308 24.00u 90 Old Style End Cap Key (Pkg of 20) - OHPART.10313 8.50u 90 Old Style Mounting Pkg, Up to 2 1/4" Door US3,US4,SP4 OHPART.10320 45.00u 90 Old Style Mounting Pkg, Up to 2 1/4" Door US10,SP10 OHPART.10321 45.00u 90 Old Style Mounting Pkg, Up to 2 1/4" Door US10B,SP313 OHPART.10322 45.00u 90 Old Style Mounting Pkg, Up to 2 1/4" Door US32,US32D,652,SP28 OHPART.10323 45.00u 90 Old Style Mounting Pkg, Up to 2 1/4" Door SPBLK OHPART.10324 45.0070/79/81/90 Angle Screw Pkg US3,US4,SP4 OHPART.10049 8.5070/79/81/90 Angle Screw Pkg US10,SP10 OHPART.10050 8.5070/79/81/90 Angle Screw Pkg US10B,SP313 OHPART.10051 8.5070/79/81/90 Angle Screw Pkg US32,US32D,SP28 OHPART.10052 8.5070/79/81/90 Angle Screw Pkg SPBLK OHPART.10053 8.5090 Hold Open Conversion Kit - OHPART.10325 27.0090 Friction Hold Open Conversion Kit - OHPART.10326 18.00l 90 End Cap SPBLK OHPART.11103 18.00l 90 End Cap & Spring Assy. SPBLK OHPART.11104 24.00l 90 Mounting Pkg, Up to 2 1/4" Dr. US3,US4,SP4 OHPART.11105 45.00l 90 Mounting Pkg, Up to 2 1/4" Dr. US10,SP10 OHPART.11106 45.00l 90 Mounting Pkg, Up to 2 1/4" Dr. US10B,SP313 OHPART.11107 45.00l 90 Mounting Pkg, Up to 2 1/4" Dr. US32,US32D,652,SP28 OHPART.11108 45.00l 90 Mounting Pkg, Up to 2 1/4" Dr. SPBLK OHPART.11109 45.00l 90 SE Conversion Kit SPBLK OHPART.11110 27.00l 90 Security Mount Pkg 2 1/4" - OHPART.10243 21.00u For Overheads shipped before October 1, 2006l For Overheads shipped after October 1, 2006<strong>Price</strong>s subject to change without notice<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 25
100 Series100 SeriesHow to Order Arm AssemblyARM10 4 H – US3Size - 1, 2, 3, 4, 5, 6Function -H (Hold Open), S (Stop Only), HP (Internal Hold Open)F (Friction Hold Open), SE (Stop Only)Optional Jamb Bracket - ADJ - Adjustable Jamb BracketCJLH, CJRH - LCN5030 Jamb BracketFinish -US3, US4, US10, US10B, US32, US32DSP4, SP10, SP313, SP28, SPBLKDescription Finish List <strong>Price</strong> Each100 Arm Assembly - Not ADJ, CJLH or CJRH US3 $192.00100 Arm Assembly - Not ADJ,CJLH or CJRH US4 182.00100 Arm Assembly - Not ADJ,CJLH or CJRH US10 179.00100 Arm Assembly - Not ADJ,CJLH or CJRH US10B 182.00100 Arm Assembly - Not ADJ,CJLH or CJRH US32 192.00100 Arm Assembly - Not ADJ,CJLH or CJRH US32D 169.00100 Arm Assembly - Not ADJ,CJLH or CJRH SP4 169.00100 Arm Assembly - Not ADJ,CJLH or CJRH SP10 169.00100 Arm Assembly - Not ADJ,CJLH or CJRH SP313 169.00100 Arm Assembly - Not ADJ,CJLH or CJRH SP28 169.00100 Arm Assembly - Not ADJ,CJLH or CJRH SPBLK 169.00100 Arm Assembly with ADJ US3 246.00100 Arm Assembly with ADJ US4 236.00100 Arm Assembly with ADJ US10 233.00100 Arm Assembly with ADJ US10B 236.00100 Arm Assembly with ADJ US32 246.00100 Arm Assembly with ADJ US32D 223.00100 Arm Assembly with ADJ SP4 223.00100 Arm Assembly with ADJ SP10 223.00100 Arm Assembly with ADJ SP313 223.00100 Arm Assembly with ADJ SP28 223.00100 Arm Assembly with ADJ SPBLK 223.00100 Arm Assembly with CJLH or CJRH US3 246.00100 Arm Assembly with CJLH or CJRH US4 236.00100 Arm Assembly with CJLH or CJRH US10 233.00100 Arm Assembly with CJLH or CJRH US10B 236.00100 Arm Assembly with CJLH or CJRH US32 246.00100 Arm Assembly with CJLH or CJRH US32D 223.00100 Arm Assembly with CJLH or CJRH SP4 223.00100 Arm Assembly with CJLH or CJRH SP10 223.00100 Arm Assembly with CJLH or CJRH SP313 223.00100 Arm Assembly with CJLH or CJRH SP28 223.00100 Arm Assembly with CJLH or CJRH SPBLK 223.00continued on next page<strong>Price</strong>s subject to change without notice26<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
100 Series100 Series (continued)How to Order Channel AssemblyCHANNEL 10 4 H –Size - 1, 2, 3, 4, 5, 6Function -H (Hold Open), S (Stop Only), HP (Internal Hold Open)F (Friction Hold Open), SE (Stop Only)Optional Jamb Bracket - ADJ - Adjustable Jamb BracketDescription Finish Part No. List <strong>Price</strong> Each100 Channel Assembly, Not ADJ or SE - $232.00100 Channel Assembly with ADJ - 256.00100 Channel Assembly with SE - 259.00100H Knob Pkg US3,US4,SP4 OHPART.10401 23.00100H Knob Pkg US10,SP10 OHPART.10402 23.00100H Knob Pkg US10B,SP313 OHPART.10403 23.00100H Knob Pkg US32,US32D,SP28 OHPART.10404 23.00100H Knob Pkg SPBLK OHPART.10405 23.00100 Mounting Pkg US3,US4,SP4 OHPART.10406 20.00100 Mounting Pkg US10,SP10 OHPART.10407 20.00100 Mounting Pkg US10B,SP313 OHPART.10408 20.00100 Mounting Pkg US32,US32D,SP28 OHPART.10409 20.00100 Mounting Pkg SPBLK OHPART.10410 20.00100ADJ Mounting Pkg US3,US4,SP4 OHPART.10411 20.00100ADJ Mounting Pkg US10,SP10 OHPART.10412 20.00100ADJ Mounting Pkg US10B,SP313 OHPART.10413 20.00100ADJ Mounting Pkg US32,US32D,SP28 OHPART.10414 20.00100ADJ Mounting Pkg SPBLK OHPART.10415 20.00100 Security Mounting Pkg - OHPART.10416 8.50100ADJ Security Mounting Pkg - OHPART.10417 8.50100ADJ Set Screw (Pkg of 10) - OHPART.10418 6.00100F Conversion Kit - OHPART.10419 18.00100H Conversion Kit US3,US4,SP4 OHPART.10420 55.00100H Conversion Kit US10,SP10 OHPART.10421 55.00100H Conversion Kit US10B,SP313 OHPART.10422 55.00100H Conversion Kit US32,US32D,SP28 OHPART.10423 55.00100H Conversion Kit SPBLK OHPART.10424 55.00100ADJ Jamb Channel US3 OHPART.10425 73.00100ADJ Jamb Channel US4 OHPART.10426 73.00100ADJ Jamb Channel US10 OHPART.10427 73.00100ADJ Jamb Channel US10B OHPART.10428 73.00100ADJ Jamb Channel US32 OHPART.10429 73.00100ADJ Jamb Channel US32D OHPART.10430 73.00100ADJ Jamb Channel SP4 OHPART.10431 63.00100ADJ Jamb Channel SP10 OHPART.10432 63.00100ADJ Jamb Channel SP313 OHPART.10433 63.00100ADJ Jamb Channel SP28 OHPART.10434 63.00100ADJ Jamb Channel SPBLK OHPART.10435 63.00100 Grommet (Pkg of 10) - OHPART.10436 15.50100 SE KIT - OHPART.10437 75.00<strong>Price</strong>s subject to change without notice<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 27
410/450 Series410/450 SeriesHow to Order Arm AssemblySize - 1, 2, 3, 4, 5Function -H (Hold Open), S (Stop Only)F (Friction Hold Open), SE (Stop Only)Finish - US3, US4, US10, US10B, US32, US32D, 652SP4, SP10, SP313, SP28, SPBLKARM41/45 4 H US3Description Finish List <strong>Price</strong> Each410/450 Arm Assembly US3 $96.00410/450 Arm Assembly US4 84.00410/450 Arm Assembly US10 84.00410/450 Arm Assembly US10B 88.00410/450 Arm Assembly US32 96.00410/450 Arm Assembly US32D 80.00410/450 Arm Assembly 652 55.00410/450 Arm Assembly SP4 55.00410/450 Arm Assembly SP10 55.00410/450 Arm Assembly SP313 55.00410/450 Arm Assembly SP28 55.00410/450 Arm Assembly SPBLK 55.00How to Order Channel AssemblyModel -41 (410 Series), 45 (450 Series)Size - 1, 2, 3, 4, 5Function -H (Hold Open), S (Stop Only)F (Friction Hold Open), SE (Stop Only)Finish - US3, US4, US10, US10B, US32, US32D, 652SP4, SP10, SP313, SP28, SPBLKCHANNEL 41 4 H US10Description Finish List <strong>Price</strong> Each450 Channel Assembly, Not SE US3 $135.00450 Channel Assembly, Not SE US4 119.00450 Channel Assembly, Not SE US10 119.00450 Channel Assembly, Not SE US10B 126.00450 Channel Assembly, Not SE US32 135.00450 Channel Assembly, Not SE US32D 114.00450 Channel Assembly, Not SE 652 83.00450 Channel Assembly, Not SE SP4 83.00450 Channel Assembly, Not SE SP10 83.00450 Channel Assembly, Not SE SP313 83.00450 Channel Assembly, Not SE SP28 83.00450 Channel Assembly, Not SE SPBLK 83.00continued on next page<strong>Price</strong>s subject to change without notice28<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
410/450 Series410/450 Series (continued)Description Finish Part No. List <strong>Price</strong> Each450SE Channel Assembly US3 $158.00450SE Channel Assembly US4 142.00450SE Channel Assembly US10 142.00450SE Channel Assembly US10B 149.00450SE Channel Assembly US32 158.00450SE Channel Assembly US32D 137.00450SE Channel Assembly 652 106.00450SE Channel Assembly SP4 106.00450SE Channel Assembly SP10 106.00450SE Channel Assembly SP313 106.00450SE Channel Assembly SP28 106.00450SE Channel Assembly SPBLK 106.00410 Channel Assembly, Not SE - 57.00410SE Channel Assembly - 80.00450 Old Style End Cap * US3,US4,SP4 OHPART.10501 10.50450 Old Style End Cap * US10,SP10 OHPART.10502 10.50450 Old Style End Cap * US10B,SP313 OHPART.10503 10.50450 Old Style End Cap * US32 OHPART.10504 24.00450 Old Style End Cap * US32D,652,SP28 OHPART.10505 10.50450 Old Style End Cap * SPBLK OHPART.10506 10.50450 Old Style End Cap & Spring Assy * US3,US4,SP4 OHPART.10507 18.00450 Old Style End Cap & Spring Assy * US10,SP10 OHPART.10508 18.00450 Old Style End Cap & Spring Assy * US10B,SP313 OHPART.10509 18.00450 Old Style End Cap & Spring Assy * US32 OHPART.10510 28.00450 Old Style End Cap & Spring Assy * US32D,652,SP28 OHPART.10511 18.00450 Old Style End Cap & Spring Assy * SPBLK OHPART.10512 18.00450 Old Style End Cap Key (Pkg of 20) * - OHPART.10513 8.50410 Old Style End Cap * - OHPART.10514 8.50410 Old Style End Cap & Spring Assy * - OHPART.10515 11.00410/450 New Style End Cap * - OHPART.10516 8.50410/450 New Style End Cap Assy * - OHPART.10517 11.00450 Mounting Pkg, 1 3/4" Door US3,US4,SP4 OHPART.10518 8.50450 Mounting Pkg, 1 3/4" Door US10,SP10 OHPART.10519 8.50450 Mounting Pkg, 1 3/4" Door US10B,SP313 OHPART.10520 8.50450 Mounting Pkg, 1 3/4" Door US32,US32D,652,SP28 OHPART.10521 8.50450 Mounting Pkg, 1 3/4" Door SPBLK OHPART.10522 8.50450 Security Mounting Pkg, 1 3/4" Door - OHPART.10523 21.00450 Mounting Pkg, Up to 2 1/4" Door US3,US4,SP4 OHPART.10524 17.00450 Mounting Pkg, Up to 2 1/4" Door US10,SP10 OHPART.10525 17.00450 Mounting Pkg, Up to 2 1/4" Door US10B,SP313 OHPART.10526 17.00450 Mounting Pkg, Up to 2 1/4" Door US32,US32D,652,SP28 OHPART.10527 17.00450 Mounting Pkg, Up to 2 1/4" Door SPBLK OHPART.10528 17.00450 Mounting Pkg, Up to 1 3/8" Door US3,US4,SP4 OHPART.10529 33.50450 Mounting Pkg, Up to 1 3/8" Door US10,SP10 OHPART.10530 33.50450 Mounting Pkg, Up to 1 3/8" Door US10B,SP313 OHPART.10531 33.50450 Mounting Pkg, Up to 1 3/8" Door US32,US32D,652,SP28 OHPART.10532 33.50450 Mounting Pkg, Up to 1 3/8" Door SPBLK OHPART.10533 33.50continued on next page* Note: Old style units were built before December 2002, End Cap has Mounting Hole in the End Cap.New style units were built starting December 2002, the End Cap goes into the channel and the mounting hole goes through both the channel & end cap.<strong>Price</strong>s subject to change without notice<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 29
410/450 & 280 Series410/450 Series (continued)Description Finish Part No. List <strong>Price</strong> Each410 Old Style Mounting Pkg * US3,US4,SP4 OHPART.10534 $12.50410 Old Style Mounting Pkg * US10,SP10 OHPART.10535 12.50410 Old Style Mounting Pkg * US10B,SP313 OHPART.10536 12.50410 Old Style Mounting Pkg * US32,US32D,652,SP28 OHPART.10537 12.50410 Old Style Mounting Pkg * SPBLK OHPART.10538 12.50410 New Style Mounting Pkg * US3,US4,SP4 OHPART.10539 18.00410 New Style Mounting Pkg * US10,SP10 OHPART.10540 18.00410 New Style Mounting Pkg * US10B,SP313 OHPART.10541 18.00410 New Style Mounting Pkg * US32,US32D,652,SP28 OHPART.10542 18.00410 New Style Mounting Pkg * SPBLK OHPART.10543 18.00410 New Security Mounting Pkg - OHPART.10554 15.50450 Angle Screw Pkg US3,US4,SP4 OHPART.10556 8.50450 Angle Screw Pkg US10,SP10 OHPART.10557 8.50450 Angle Screw Pkg US10B,SP313 OHPART.10558 8.50450 Angle Screw Pkg US32,US32D,SP28 OHPART.10559 8.50450 Angle Screw Pkg SPBLK OHPART.10560 8.50410 Old Security Mounting Pkg, 1 3/4" Door - OHPART.10555 15.50410/450 Hold Open Conversion Kit - OHPART.10544 31.00410/450 Friction Hold Open Conversion Kit - OHPART.10545 23.00450 SE Old Style Conversion Kit * US3,US4,SP4 OHPART.10546 31.00450 SE Old Style Conversion Kit * US10,SP10 OHPART.10547 31.00450 SE Old Style Conversion Kit * US10B,SP313 OHPART.10548 31.00450 SE Old Style Conversion Kit * US32 OHPART.10549 31.00450 SE Old Style Conversion Kit * US32D,652,SP28 OHPART.10550 31.00450 SE Old Style Conversion Kit * SPBLK OHPART.10551 31.00410 SE Old Style Conversion Kit * - OHPART.10552 28.00410/450 SE New Style Conversion Kit * - OHPART.10553 28.00* Note: Old style units were built before December 2002, End Cap has Mounting Hole in the End Cap.New style units were built starting December 2002, the End Cap goes into the channel and the mounting hole goes through both the channel & end cap.280 SeriesDescription Finish Part No. List <strong>Price</strong> Each280 Arm Assembly US28 OHPART.10601 $126.00280 Arm Assembly 313AN OHPART.10602 126.00280 Mounting Package US28 OHPART.10603 28.00280 Mounting Package 313AN OHPART.10604 28.00280 Security Mounting Package - OHPART.10605 20.00<strong>Price</strong>s subject to change without notice30<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
Push / Pull LatchesHow to Order Handle AssemblyModel -Material -Options -Style -Finish -HL6HL6M - HL6 Mortise Lock VersionPL7 - Push Side ThumbturnPL8 - Pull Side ThumbturnB - Brass Material for US26DEngraving - Up, Down, Towards, AwayEO (Exit Only), EN (Entrance Only)PUSHPULLUS3, US4, US10, US10B, US26, US26D, US32, US32DHANDLE – HL6 – PUSH – US3Engraved UpEngraved DownEngrave TowardsEngrave AwayDescription Finish List <strong>Price</strong> EachHL6 Push or Pull Handle Assy with No Options US3 $128.00HL6 Push or Pull Handle Assy with No Options US4 118.00HL6 Push or Pull Handle Assy with No Options US10 118.00HL6 Push or Pull Handle Assy with No Options US10B 128.00HL6 Push or Pull Handle Assy with No Options US26 126.00HL6 Push or Pull Handle Assy with No Options US26D 104.00HL6 Push or Pull Handle Assy with No Options US26D (Brass) 115.50HL6 Push or Pull Handle Assy with No Options US32 122.00HL6 Push or Pull Handle Assy with No Options US32D 118.00HL6EO Push or EN Pull Handle Assy US3 128.00HL6EO Push or EN Pull Handle Assy US4 118.00HL6EO Push or EN Pull Handle Assy US10 118.00HL6EO Push or EN Pull Handle Assy US10B 128.00HL6EO Push or EN Pull Handle Assy US26 126.00HL6EO Push or EN Pull Handle Assy US26D 104.00HL6EO Push or EN Pull Handle Assy US26D(Brass) 115.50HL6EO Push or EN Pull Handle Assy US32 122.00HL6EO Push or EN Pull Handle Assy US32D 116.00continued on next page<strong>Price</strong>s subject to change without notice<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 31
Push / Pull LatchesDescription Finish Part No. List <strong>Price</strong> EachHL6 Engraved Push or Pull Handle Assy US3 $141.50HL6 Engraved Push or Pull Handle Assy US4 131.50HL6 Engraved Push or Pull Handle Assy US10 131.50HL6 Engraved Push or Pull Handle Assy US10B 141.50HL6 Engraved Push or Pull Handle Assy US26 139.50HL6 Engraved Push or Pull Handle Assy US26D 117.50HL6 Engraved Push or Pull Handle Assy US26D(Brass) 129.00HL6 Engraved Push or Pull Handle Assy US32 135.50HL6 Engraved Push or Pull Handle Assy US32D 131.50HL6M Push or Pull Handle Assy US3 128.00HL6M Push or Pull Handle Assy US4 118.00HL6M Push or Pull Handle Assy US10 118.00HL6M Push or Pull Handle Assy US10B 128.00HL6M Push or Pull Handle Assy US26 126.00HL6M Push or Pull Handle Assy US26D 104.00HL6M Push or Pull Handle Assy US26D(Brass) 115.50HL6M Push or Pull Handle Assy US32 122.00HL6M Push or Pull Handle Assy US32D 118.00HL6M Engraved Push or Pull Handle Assy US3 141.50HL6M Engraved Push or Pull Handle Assy US4 131.50HL6M Engraved Push or Pull Handle Assy US10 131.50HL6M Engraved Push or Pull Handle Assy US10B 141.50HL6M Engraved Push or Pull Handle Assy US26 139.50HL6M Engraved Push or Pull Handle Assy US26D 117.50HL6M Engraved Push or Pull Handle Assy US26D(Brass) 129.00HL6M Engraved Push or Pull Handle Assy US32 135.50HL6M Engraved Push or Pull Handle Assy US32D 131.50PL7/PL8 Push or Pull Handle Assy US3 161.00PL7/PL8 Push or Pull Handle Assy US4 153.00PL7/PL8 Push or Pull Handle Assy US10 153.00PL7/PL8 Push or Pull Handle Assy US10B 161.00PL7/PL8 Push or Pull Handle Assy US26 157.00PL7/PL8 Push or Pull Handle Assy US26D 134.00PL7/PL8 Push or Pull Handle Assy US26D(Brass) 145.50PL7/PL8 Push or Pull Handle Assy US32 161.00PL7/PL8 Push or Pull Handle Assy US32D 153.00PL7/PL8 Engraved Push or Pull Handle Assy US3 174.50PL7/PL8 Engraved Push or Pull Handle Assy US4 166.50PL7/PL8 Engraved Push or Pull Handle Assy US10 166.50PL7/PL8 Engraved Push or Pull Handle Assy US10B 174.50PL7/PL8 Engraved Push or Pull Handle Assy US26 170.50PL7/PL8 Engraved Push or Pull Handle Assy US26D 147.50PL7/PL8 Engraved Push or Pull Handle Assy US26D(Brass) 159.00PL7/PL8 Engraved Push or Pull Handle Assy US32 174.50PL7/PL8 Engraved Push or Pull Handle Assy US32D 166.50HL6/HL6M Cover Pkg US3 HLPART.10001 74.00HL6/HL6M Cover Pkg US4 HLPART.10002 66.00HL6/HL6M Cover Pkg US10 HLPART.10003 66.00HL6/HL6M Cover Pkg US10B HLPART.10004 74.00HL6/HL6M Cover Pkg US26 HLPART.10005 74.00HL6/HL6M Cover Pkg US26D HLPART.10006 58.00continued on next page<strong>Price</strong>s subject to change without notice32<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
Push / Pull LatchesDescription Finish Part No. List <strong>Price</strong> EachHL6/HL6M Cover Pkg US26D(Brass) HLPART.10007 $66.50HL6/HL6M Cover Pkg US32 HLPART.10008 70.00HL6/HL6M Cover Pkg US32D HLPART.10009 66.00PL7/PL8 Coin Release Cover Pkg US3 HLPART.10010 104.00PL7/PL8 Coin Release Cover Pkg US4 HLPART.10011 94.00PL7/PL8 Coin Release Cover Pkg US10 HLPART.10012 94.00PL7/PL8 Coin Release Cover Pkg US10B HLPART.10013 104.00PL7/PL8 Coin Release Cover Pkg US26 HLPART.10014 104.00PL7/PL8 Coin Release Cover Pkg US26D HLPART.10015 87.00PL7/PL8 Coin Release Cover Pkg US26D(Brass) HLPART.10016 95.50PL7/PL8 Coin Release Cover Pkg US32 HLPART.10017 99.00PL7/PL8 Coin Release Cover Pkg US32D HLPART.10018 99.00PL7/PL8 Thumbturn Cover Pkg US3 HLPART.10019 167.00PL7/PL8 Thumbturn Cover Pkg US4 HLPART.10020 162.00PL7/PL8 Thumbturn Cover Pkg US10 HLPART.10021 162.00PL7/PL8 Thumbturn Cover Pkg US10B HLPART.10022 167.00PL7/PL8 Thumbturn Cover Pkg US26 HLPART.10023 167.00PL7/PL8 Thumbturn Cover Pkg US26D HLPART.10024 153.00PL7/PL8 Thumbturn Cover Pkg US26D(Brass) HLPART.10025 161.50PL7/PL8 Thumbturn Cover Pkg US32 HLPART.10026 165.00PL7/PL8 Thumbturn Cover Pkg US32D HLPART.10027 162.00PL7/PL8 Coin Release Pkg US3 HLPART.10028 26.00PL7/PL8 Coin Release Pkg US4 HLPART.10029 26.00PL7/PL8 Coin Release Pkg US10 HLPART.10030 26.00PL7/PL8 Coin Release Pkg US10B HLPART.10031 26.00PL7/PL8 Coin Release Pkg US26,US32 HLPART.10032 26.00PL7/PL8 Coin Release Pkg US26D,US32D HLPART.10033 26.00PL7/PL8 Thumbturn Pkg US3 HLPART.10034 89.00PL7/PL8 Thumbturn Pkg US4 HLPART.10035 89.00PL7/PL8 Thumbturn Pkg US10 HLPART.10036 89.00PL7/PL8 Thumbturn Pkg US10B HLPART.10037 89.00PL7/PL8 Thumbturn Pkg US26,US32 HLPART.10038 89.00PL7/PL8 Thumbturn Pkg US26D,US32D HLPART.10039 89.00HL6/PL7/PL8 Standard Strike Pkg US3 HLPART.10040 25.00HL6/PL7/PL8 Standard Strike Pkg US4 HLPART.10041 25.00HL6/PL7/PL8 Standard Strike Pkg US10 HLPART.10042 25.00HL6/PL7/PL8 Standard Strike Pkg US10B HLPART.10043 25.00HL6/PL7/PL8 Standard Strike Pkg US26,US26D,US32,US32D HLPART.10044 25.00HL6/PL7/PL8 ASA Strike Pkg US3 HLPART.10045 25.00HL6/PL7/PL8 ASA Strike Pkg US4 HLPART.10046 25.00HL6/PL7/PL8 ASA Strike Pkg US10 HLPART.10047 25.00HL6/PL7/PL8 ASA Strike Pkg US10B HLPART.10048 25.00HL6/PL7/PL8 ASA Strike Pkg US26,US26D,US32,US32D HLPART.10049 25.00HL6M ASA Strike Pkg US3 HLPART.10050 18.00HL6M ASA Strike Pkg US4 HLPART.10051 18.00HL6M ASA Strike Pkg US10 HLPART.10052 18.00HL6M ASA Strike Pkg US10B HLPART.10053 18.00HL6M ASA Strike Pkg US26,US26D,US32,US32D HLPART.10054 18.00HL6M-BT Strike Pkg US3, US4, US10, US10B, US26, US26D 860092-XX 54.00HL6/PL7/PL8 RL Strike Pkg US3 HLPART.10055 18.00HL6/PL7/PL8 RL Strike Pkg US4 HLPART.10056 18.00HL6/PL7/PL8 RL Strike Pkg US10 HLPART.10057 18.00HL6/PL7/PL8 RL Strike Pkg US10B HLPART.10058 18.00HL6/PL7/PL8 RL Strike Pkg US26,US26D,US32,US32D HLPART.10059 18.00continued on next page<strong>Price</strong>s subject to change without notice<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 33
Push / Pull LatchesDescription Finish Part No. List <strong>Price</strong> EachHL6/PL7/PL8 2 3/4" Latchbolt Pkg US3 HLPART.10060 $45.00HL6/PL7/PL8 2 3/4" Latchbolt Pkg US4 HLPART.10061 45.00HL6/PL7/PL8 2 3/4" Latchbolt Pkg US10 HLPART.10062 45.00HL6/PL7/PL8 2 3/4" Latchbolt Pkg US10B HLPART.10063 45.00HL6/PL7/PL8 2 3/4" Latchbolt Pkg US26,US32 HLPART.10064 45.00HL6/PL7/PL8 2 3/4" Latchbolt Pkg US26D,US32D HLPART.10065 45.00HL6/PL7/PL8 3 3/4" Latchbolt Pkg US3 HLPART.10066 47.00HL6/PL7/PL8 3 3/4" Latchbolt Pkg US4 HLPART.10067 47.00HL6/PL7/PL8 3 3/4" Latchbolt Pkg US10 HLPART.10068 47.00HL6/PL7/PL8 3 3/4" Latchbolt Pkg US10B HLPART.10069 47.00HL6/PL7/PL8 3 3/4" Latchbolt Pkg US26,US32 HLPART.10070 47.00HL6/PL7/PL8 3 3/4" Latchbolt Pkg US26D,US32D HLPART.10071 47.00HL6/PL7/PL8 5" Latchbolt Pkg US3 HLPART.10072 48.00HL6/PL7/PL8 5" Latchbolt Pkg US4 HLPART.10073 48.00HL6/PL7/PL8 5" Latchbolt Pkg US10 HLPART.10074 48.00HL6/PL7/PL8 5" Latchbolt Pkg US10B HLPART.10075 48.00HL6/PL7/PL8 5" Latchbolt Pkg US26,US32 HLPART.10076 48.00HL6/PL7/PL8 5" Latchbolt Pkg US26D,US32D HLPART.10077 48.00HL6/PL7/PL8 7" Latchbolt Pkg US3 HLPART.10078 93.00HL6/PL7/PL8 7" Latchbolt Pkg US4 HLPART.10079 93.00HL6/PL7/PL8 7" Latchbolt Pkg US10 HLPART.10080 93.00HL6/PL7/PL8 7" Latchbolt Pkg US10B HLPART.10081 93.00HL6/PL7/PL8 7" Latchbolt Pkg US26,US32 HLPART.10082 93.00HL6/PL7/PL8 7" Latchbolt Pkg US26D,US32D HLPART.10083 93.00HL6/PL7/PL8RL Faceplate Adapter Pkg US3 HLPART.10084 26.00HL6/PL7/PL8RL Faceplate Adapter Pkg US4 HLPART.10085 26.00HL6/PL7/PL8RL Faceplate Adapter Pkg US10 HLPART.10086 26.00HL6/PL7/PL8RL Faceplate Adapter Pkg US10B HLPART.10087 26.00HL6/PL7/PL8RL Faceplate Adapter Pkg US26,US32 HLPART.10088 26.00HL6/PL7/PL8RL Faceplate Adapter Pkg US26D,US32D HLPART.10089 26.00HL6/PL7/PL8RL Conversion Kit US3 HLPART.10090 40.00HL6/PL7/PL8RL Conversion Kit US4 HLPART.10091 40.00HL6/PL7/PL8RL Conversion Kit US10 HLPART.10092 40.00HL6/PL7/PL8RL Conversion Kit US10B HLPART.10093 40.00HL6/PL7/PL8RL Conversion Kit US26,US32 HLPART.10094 40.00HL6/PL7/PL8RL Conversion Kit US26D,US32D HLPART.10095 40.00HL6M Armor Front - 9010,9040 US3 HLPART.10096 25.00HL6M Armor Front - 9010,9040 US4 HLPART.10097 25.00HL6M Armor Front - 9010,9040 US10 HLPART.10098 25.00HL6M Armor Front - 9010,9040 US10B HLPART.10099 25.00HL6M Armor Front - 9010,9040 US26,US32 HLPART.10100 25.00HL6M Armor Front - 9010,9040 US26D,US32D HLPART.10101 25.00HL6M Armor Front - 9050/60/70/80/82 US3 HLPART.10102 25.00HL6M Armor Front - 9050/60/70/80/82 US4 HLPART.10103 25.00HL6M Armor Front - 9050/60/70/80/82 US10 HLPART.10104 25.00HL6M Armor Front - 9050/60/70/80/82 US10B HLPART.10105 25.00HL6M Armor Front - 9050/60/70/80/82 US26,US32 HLPART.10106 25.00HL6M Armor Front - 9050/60/70/80/82 US26D,US32D HLPART.10107 25.00continued on next page<strong>Price</strong>s subject to change without notice34<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
Push / Pull LatchesDescription Finish Part No. List <strong>Price</strong> EachHL6M Armor Front - 9456/57/65/66/73 US3 HLPART.10108 $25.00HL6M Armor Front - 9456/57/65/66/73 US4 HLPART.10109 25.00HL6M Armor Front - 9456/57/65/66/73 US10 HLPART.10110 25.00HL6M Armor Front - 9456/57/65/66/73 US10B HLPART.10111 25.00HL6M Armor Front - 9456/57/65/66/73 US26,US32 HLPART.10112 25.00HL6M Armor Front - 9456/57/65/66/73 US26D,US32D HLPART.10113 25.00HL6M Armor Front - 9453/85/86 US3 HLPART.10114 25.00HL6M Armor Front - 9453/85/86 US4 HLPART.10115 25.00HL6M Armor Front - 9453/85/86 US10 HLPART.10116 25.00HL6M Armor Front - 9453/85/86 US10B HLPART.10117 25.00HL6M Armor Front - 9453/85/86 US26,US32 HLPART.10118 25.00HL6M Armor Front - 9453/85/86 US26D,US32D HLPART.10119 25.00HL6M Emergency Button - 9040 US3 HLPART.10120 10.50HL6M Emergency Button - 9040 US4 HLPART.10121 10.50HL6M Emergency Button - 9040 US10 HLPART.10122 10.50HL6M Emergency Button - 9040 US10B HLPART.10123 10.50HL6M Emergency Button - 9040 US26,US32 HLPART.10124 10.50HL6M Emergency Button - 9040 US26D,US32D HLPART.10125 10.50HL6M Thumbturn - 9040/50/9453/56/73/85/86 US3 HLPART.10126 47.00HL6M Thumbturn - 9040/50/9453/56/73/85/86 US4 HLPART.10127 47.00HL6M Thumbturn - 9040/50/9453/56/73/85/86 US10 HLPART.10128 47.00HL6M Thumbturn - 9040/50/9453/56/73/85/86 US10B HLPART.10129 47.00HL6M Thumbturn - 9040/50/9453/56/73/85/86 US26,US32 HLPART.10130 47.00HL6M Thumbturn - 9040/50/9453/56/73/85/86 US26D,US32D HLPART.10131 47.00HL6EO/EN Backplate Assembly US3 HLPART.10132 138.00HL6EO/EN Backplate Assembly US4 HLPART.10133 127.00HL6EO/EN Backplate Assembly US10 HLPART.10134 127.00HL6EO/EN Backplate Assembly US10B HLPART.10135 138.00HL6EO/EN Backplate Assembly US26,US32 HLPART.10136 135.00HL6EO/EN Backplate Assembly US26D,US32D HLPART.10137 115.00HL6M Lock Body - 9010 - HLPART.10138 183.00HL6M Lock Body - 9040 - HLPART.10139 214.00HL6M Lock Body - 9050/60/70 - HLPART.10140 239.00HL6M Lock Body - 9080 - HLPART.10141 239.00HL6M Lock Body - 9080EL - HLPART.10142 767.00HL6M Lock Body - 9080EU - HLPART.10143 767.00HL6M Lock Body - 9080EL/RX - HLPART.10144 996.00HL6M Lock Body - 9080EU/RX - HLPART.10145 996.00HL6M Lock Body - 9082 - HLPART.10146 239.00HL6M Lock Body - 9082EL - HLPART.10147 767.00HL6M Lock Body - 9082EU - HLPART.10148 767.00HL6M Lock Body - 9453 - HLPART.10149 264.00HL6M Lock Body - 9456 - HLPART.10150 264.00HL6M Lock Body - 9465/66/73 - HLPART.10151 264.00HL6M Lock Body - 9485/86 - HLPART.10152 327.00HL6/PL7/PL8 Lead Lining - 2 3/4" - HLPART.10153 85.00HL6/PL7/PL8 Lead Lining - 3 3/4" - HLPART.10154 85.00HL6/PL7/PL8 Lead Lining - 5" - HLPART.10155 85.00HL6/PL7/PL8 Lead Lining - 7" - HLPART.10156 85.00HL6M Lead Lining - HLPART.10157 245.00continued on next page<strong>Price</strong>s subject to change without notice<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 35
Push / Pull LatchesDescription Finish Part No. List <strong>Price</strong> EachHL6/HL6M/PL7/PL8 Spring & Rivet Pkg - HLPART.10158 11.50HL6 Old Style Spring(1 Coil) & Rivet Pkg - HLPART.10159 11.50HL6/HL6M/PL7/PL8 Rivet Pkg - HLPART.10160 10.50HL6M Mounting Plate - HLPART.10161 10.50HL6/PL7/PL8 Mounting Pkg US3,US4 HLPART.10162 20.00HL6/PL7/PL8 Mounting Pkg US10 HLPART.10163 20.00HL6/PL7/PL8 Mounting Pkg US10B HLPART.10164 20.00HL6/PL7/PL8 Mounting Pkg US26,US26D,US32,US32D HLPART.10165 20.00HL6EO/EN Mounting Pkg US3,US4 HLPART.10166 20.00HL6EO/EN Mounting Pkg US10 HLPART.10167 20.00HL6EO/EN Mounting Pkg US10B HLPART.10168 20.00HL6EO/EN Mounting Pkg US26,US26D,US32,US32D HLPART.10169 20.00HL6M Mounting Pkg US3,US4 HLPART.10170 20.00HL6M Mounting Pkg US10 HLPART.10171 20.00HL6M Mounting Pkg US10B HLPART.10172 20.00HL6M Mounting Pkg US26,US26D,US32,US32D HLPART.10173 20.00HL6/PL7/PL8 Security Mounting Pkg - HLPART.10174 25.00HL6EO/EN Security Mounting Pkg - HLPART.10175 25.00HL6M Security Mounting Pkg - HLPART.10176 25.00HL6/HL6M,/PL7/PL8 Cover Screws(Pkg of 25) US3,US4 HLPART.10177 25.00HL6/HL6M,/PL7/PL8 Cover Screws(Pkg of 25) US10 HLPART.10178 25.00HL6/HL6M,/PL7/PL8 Cover Screws(Pkg of 25) US10B HLPART.10179 25.00HL6/HL6M,/PL7/PL8 Cover Screws(Pkg of 25) US26,US26D,US32,US32D HLPART.10180 25.00HL6M Mounting Nut (Pkg of 25) - HLPART.10182 8.50HL6M Armor Front Screws(Pkg of 10) US3,US4 HLPART.10183 10.50HL6M Armor Front Screws (Pkg of 10) US10 HLPART.10184 10.50HL6M Armor Front Screws(Pkg of 10) US10B HLPART.10185 10.50HL6M Armor Front Screws (Pkg of 10) US26,US26D,US32,US32D HLPART.10186 10.50<strong>Price</strong>s subject to change without notice36<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013
GLYNN-JOHNSON WARRANTYGlynn-Johnson (the "Company") warrants only to Customerthat the products will be free from defects in material andworkmanship for a period of 12 monthsfrom the date of shipment of the products. The Customershall be obligated to promptly report any failure toconform to this warranty in writing to the Company withinthe warranty period provided above. Company’s soleobligation under this warranty is limited to repairing orreplacing, at its option, the defective products.NO OTHER WARRANTIES, EXPRESS OR IMPLIED,ARE MADE WITH RESPECT TO THE PRODUCTSINCLUDING, BUT NOT LIMITED TO, ANY IMPLIEDWARRANTY OF MERCHANTABILITY OR FITNESSFOR A PARTICULAR PURPOSE.The provisions of this limited warranty do not apply toproducts: (i) used for the purposes for which they are notdesigned or intended; (ii) which have been repaired oraltered without Company's prior written consent; (iii) whichhave been subjected to misuse, abuse, negligence, oraccident; (iv) which have been improperly stored, installed,maintained, or operated; (v) which have been used inviolation of written instructions provided by Company toCustomer; (vi) which have been subjectedto improper temperature, humidity, or other environmentalconditions; (vii) which have been affected by normalwear and tear; or (viii) which, based on Company'sexamination, do not disclose to Company's satisfaction nonconformanceto the warranty.The following costs and expenses are not covered by theprovisions of this limited warranty: (i) labor costs for theremoval and reinstallation of products; (ii) shipping andfreight expenses required to return products to Company;(iii) normal maintenance; and (iv) economic losses. In addition,the provisions of this warranty are not applicable toanything other than defects in Company’s material (productsonly) or workmanship.CONSUMER PRODUCTS. With respect to "consumerproducts" as defined under the Magnuson-Moss WarrantyAct ("MMWA"), the following statements are made.(a) Some states do not allow limitations on how long animplied warranty lasts, so the above limitation may notapply to you. IF ANY IMPLIED WARRANTY IS PROVIDEDUNDER THE MMWA, IT IS LIMITED TO THE DURATION OFTHE WARRANTY PROVIDED ABOVE. (b) Some states do notallow the exclusion or limitation of incidental or consequentialdamages, so the above limitation orexclusion may not apply to you. (c) This warranty gives youspecific legal rights and you may also have other rightswhich vary from state to state.<strong>Price</strong>s subject to change without notice<strong>Price</strong> <strong>Book</strong> 2013B • Effective July 1, 2013 37
Ingersoll Rand's Security Technologies Sector is a leading global provider of products and services that make environments safe, secureand productive. The sector's market-leading products include electronic and biometric access-control systems; time-and-attendanceand personnel scheduling systems; mechanical locks; portable security; door closers, exit devices, architectural hardware, and steeldoors and frames; and other technologies and services for global security markets.877-671-7011 www.glynnjohnson.ingersollrand.com© 2013 Ingersoll Rand GJ-3012 Rev. 6/13 Printed in U.S.A.
Change language