12.07.2015 Views

Product Info

Product Info

Product Info

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Product</strong> <strong>Info</strong>Stand-alone multi switch | Cascadable multi switch | One to four positions | Line amplifier | AccessoriesCascadable multi switchTMM cascadable 4x Seriesfor one to foursatellite positionsModular and versatile- expand your system as the need arisesThe TMM 5x Series provides you with an excellent multiswitch solution when you have a need for access toone to four satellite positions. Due to the modular andcompact concept the system allows you to expand it asthe need arises without loosing flexibility and with full useof initial investment. Start with one position and a fewusers. Add more cable, users and even positions later,with no waste and a total re-use of initial installation.Easy adjustments.All TMM multi switches feature an attenuator for eachpolarity, which enables you to secure a uniform level nomatter where the multi switch is placed. Near or far awayfrom the dish and LNB or line amplifier, the same switchcan be used.Easy and simple installation.The compact TMM units can be easily mounted on thewall using 4- og 6-unit mounting plates (allows preassembly),or simply on the wall using brackets on everyunit. Multi position installations are typically done using4- and 8-output units and DiSEqC bridger units.One system, many polarities and many subscribers.The TMM cascadable switches enables you to build largecascadable systems using the same few units as simplebuilding blocks. If more satellite positions are needed, upto 4 TMM units can be placed side-by-side and bridgedvia a 2-, 3- or 4-way DiSEqC bridger unit.Any mix between 1 and up to 4 satellite positions can beused for every subscriber.Save the environment.TMM Multi switches are powered by the individual settop boxes. External power supply is only needed for lineamplifiers and LNB, and it can be placed anywhere inthe system, where you have mains available and is NOTrestricted to an inaccessible position.TMM Series• 4 satellite polarities• Versions for 8, 12 and 16 subscriber outputs• Adjustable attenuator per polarity (0-12 dB)• Low Power consumption• Compact design, fits into tight spaces• 2-, 3- and 4-way DiSEqC Bridger units withTER loop-through• Wide range of Launch and Line Amplifiers availableTRIAX - your ultimate connection


TMM-series of cascadable multi switchTechnical dataTypePart No.TMM 4x4 * )305324TMM 4x8 * )305328TMM 4x12305322TMM 4x16305326Frequency range MHz 950-2150 950-2150 950-2150 950-2150Number of inputsSAT 4 4 4 4Number of trunk outputsSAT 4 4 4 4Subscriber outputs 4 8 12 16Connectors F-type F-type F-type F-typeTrunk lossSAT 950-2150 MHz dB 1.5 2.5 2.5 2.5Tap lossSAT 950-2150 MHz dB 10 10 12 12Input polarity gain control4x SAT 950-2150 MHz dB 12 12 12 12IsolationCross polarisation H/VOut/out - SATInput return lossSAT input 950-2150 MHzSAT output 950-2150 MHzTAP output 950-2150 MHzdBdBdBdBdB3030121210Max. input levelSAT (IMA3 / -35 dB) dBµV 117 117 119 119Max. output levelSAT (IMA3 / -35 dB) dBµV 95 95 95 95Switching commandsVDC/kHz3030121210283012121013V / 18V13V - 22 kHz / 18 - 22 kHzSwitching voltage V 15 /±1VExternal power supply2830121210NO (DC on all 4 trunk lines via power inserter or amplifier)Max. current of each outpur(supplied by satellite receiver) mA < 150 < 150 < 150 < 150DimensionsWidthHeightDepthmmmmmm*) Suitable for multi position setup and DiSEqC bridger unitsAlso available in the TMM Series:TMM 5x4/8/12/16: Single position multi switch with TER inputTMM 2B: 2x1 DiSEqC Bridger unitTMM 3B: 3x1 DiSEqC Bridger unitTMM 4B: 4x1 DiSEqC Bridger unitOther accessories:TMM 4/5 IN: Push-On Earth Bond BarsTMM 4/6/8 OUT: Push-On Earth Bond BarsTMM SM PSU: Switch Mode Power SupplyTMM PSI: Power Inserter for use with TMM SM PSUTMM 55 AMP: 4 x SAT Line Amplifier plus 1 x TER AmplifierTMM 44 AMP: 4 x SAT Launch AmplifierTMM TER AMP: FM-Band II / DAB / 2 x UHF Multi Band Launch AmplifierTMM TDA AMP: Terrestrial Distribution AmplifierIFM 120/130/135: Multi Band Terrestrial Launch AmplifierTMM 5x10 SPLIT: 2-way 5-line Splitter to supply more trunksTMM 4+1x10 SPLIT: 2-way 5-line Splitter to supply more trunksTMM4-way mounting plateTMM6-way mounting plateTMMFixed Link, 5-packTMMMounting Frame coupler, 2-packTMM75-ohm terminatorTMMF-F Male Quick ConnectorTMMRemote Power LeadTMMDCL-DC Link LeadTMMCL Long connection LeadTRIAX A/SBjørnkærvej 3 • DK-8783 Hornsyld+45 76 82 22 00 • +45 75 68 79 66mail: triax@triax.dk • www.triax.comTRIAX - your ultimate connection

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!