STARLINE CATALOGUE SplitSTAR

®DIMENSIONSFLANGED PN 16 - 25 - 40Face to face according to EN 558-1 Basic Series 14on request according to EN 558-1 Basic Seried 1FLANGED ASME 150Face to face according to ASME B16.10Flanged according to ASME B16.5FLANGED ASME 300Face to face according to ASME B16.10Flanged according to ASME B16.5PN 16-25-40 SERIE 14 FULL BOREAVALVEDIMENSIONS mmISO WEIGHTVALVEDNA B C D E F G5211 KGDN* Face to Face according to EN-558-1 SERIE 15 15 115 49 27 15 70 152 95 F03 1,415 13020 120 50 33,5 20 80 193 105 F04 3,220 15025 125 53 38 25 92 193 115 F04 4,525 16032 130 56,5 43,5 32 100 225 140 F05 6,232 18040 140 58,5 47,5 40 113 225 150 F05 7,540 20050 150 63 58,5 50 118 225 165 F05 10,550 23065 170 72,5 70 65 135 360 185 F07 1565 29080 180 77 87,5 80 150 420 200 F07 2080 310100 300* 90 110 100 190 420 235 F07 45100 350150** 350* 170 170 150 263 700 300 F10 65150** 480VALVEDN150200**VALVESIZEDNinchDNinchDNinchDNinchDNinchDNinchDNinchDNinchDNinchDNinch151/2”203/4”251”321.1/4”401.1/2”502”652.1/2”803”1004”1506”A350400A1084.1/4”117,54.5/8”1275”1405.1/2”1656.1/2”1787”190,57.1/2”2038”228,59”39415.1/2”PN 16-25-40 SERIE 15 REDUCED BOREB C D E F G105115ASME/ANSI 150 FULL BOREB C D E F G45,51.3/4”502”532.1/8”56,52.1/4”58,52.3/8”632.1/2”72,52.7/8”773”903.9/6”1706,11/16”110170**Available only for class PN 16-25271.1/8”33,51.1/4”381.1/2”43,51.3/4”47,51.7/8”58,52.1/4”702.3/4”87,53.1/2”1104.5/16”1515.15/16”DIMENSIONS mm100150DIMENSIONS mm/inch150.6”200.8”251”321.25”401.6”501.96”652.55”803.15”1003.94”1505.90”190263702.3/4”803.1/8”923.5/8”1004”1134.1/2”1184.5/8”1355.3/8”1505.7/8”1907.1/2”26310.3/8”4207001526”1937.1/2”1937.1/2”2258.7/8”2258.7/8”2258.7/8”36014.1/8”42016.9/16”42016.9/16”70027.9/16”30037589,53.1/2”98,53.7/8”1084.1/4”117,54.5/8”1275”152,56”1787”190,57.1/2”228,59”279,511”ISO5211F07F10ISO5211F03F04F04F05F05F05F07F07F07F10WEIGHTKGWEIGHTKG LBS1,334,567,5 16,710,5 23,315205057762,96,71013,333,344,411180 177,6VALVEDN150200**VALVESIZEDNinchDNinch1506”2008”VALVESIZEDN 100inch 4”VALVESIZEDN 150inch 6”A480600A39415.1/2”45718”A3059”A40315.1/2”PN 16-25-40 SERIE 1 FULL BOREB C D E F G49505356,558,56372,577901702733,53843,547,558,57087,5110170DIMENSIONS mm152025324050658010015070809210011311813518019026315219319322522522536042042070095105115140150165185200235300PN 16-25-40 SERIE 1 REDUCED BOREB C D E F G240300ASME/ANSI 150 REDUCED BOREB C D E F G1977.3/4”228,59”DIMENSIONS mm/inch1104.5/16”1515.15/16”1003,94”1505.90”1907.1/2”26310.3/8”42016.9/16”70027.9/16”ASME/ANSI 300 FULL BORE279,511”342,913.1/2”B C D E F G903.9/16”1104.5/16”DIMENSIONS mm/inch1003.94”1907.1/2”42016.9/16”25410”ASME/ANSI 300 REDUCED BOREB C D E F G2027.15/16”1101701104.5/16”DIMENSIONS mm100150DIMENSIONS mm/inch1003.94”1902631907.1/2”42070042016.9/16”300375317,512.1/2”ISO5211F03F04F04F05F05F05F07F07F07F10ISO5211F07F10ISO5211F07F10ISO5211WEIGHTKG1,53,44,96,88,51218,5265476WEIGHTKG LBS60 133,295 210,9WEIGHTKG LBSF07 65 144,3ISO5211WEIGHTKG6883WEIGHTKG LBSF07 83 184,3

®AUTOMATIONHOW TO TRANSFORM A MANUAL OPERATED VALVE IN AUTOMATED VALVES1 - Take out the handle nut (part. no 2A)2 - Take out the lever (part no.1)3 - Fit again the handle nut (part no. 2A)THE BELOW TABLE REFERS TO AIR TORQUE ACTUATORSVALVE SIZEFULL BORE RED. BOREInch1/2”3/4”1”1.1/4”1.1/2”2”2.1/2”3”4”6”DN1520253240506580100150Inch--------6”8”DN--------200A158.5158.5210.5210.5210.5247.5268.5268.5408.5B677373828697115132221DIMENSIONS (mm)C8585102102102115127127150 408.5 162,5 177177DOUBLE ACTING ACTUATORD20202020202020203030E363642.542.542.549.556568080F474752525256.8676791,591,5ACTUATORTYPEAT 101 DAISO F05-CH14AT 101 DAISO F05-CH14AT 201 DAISO F05/F07-CH14AT 201 DAISO F05/F07-CH14AT 201 DAISO F05/F07-CH14AT 251 DAISO F05/F07-CH17AT 301 DAISO F05/F07-CH17AT 301 DAISO F05/F07-CH17AT 451 DAISO F10/F12-CH27AT 451 DAISO F10/F12-CH27BRACKETTYPEST1ST2ST2ST3ST3ST3ST4ST4BT3BT4ADAPTORTYPEA1/BA2/BA2/BA3/EA3/EA3/BA4/GA5/EA5/FA6/A1/2”3/4”1”1.1/4”1.1/2”2”2.1/2”3”*4”*6”DIMENSIONS AND TORQUE TO SELECT ACTUATORSUITABLE FOR STARLINE BALL VALVESVALVE SIZEA B C D Ø E Ø F G ISOFULL BORE5211Inch. DN mm mm mm mm mm mm mm1520253240506580100150M10x1M12x1.25M12x1.25M15x1.5M15x1.5M15x1.5M22x1.5M24x2M24x1,5Ø 345.57.57.58.98.98.91618.218.226612.512.514141113.52317395.577131312.517141621*THE MISURES OF 4” FULL BORE ARE THE SAME OF 6” REDUCED BORETHE MISURES OF 6” FULL BORE ARE THE SAME OF 8” REDUCED BORE25303035353555555570364242505050707070102M5x8M5x8M5x8M6x10M6x10M6x10M8x12M8x12M8x12M10x15F03F04F04F05F05F05F07F07F07F10VALVE SIZEFULL BORE RED. BOREInch1/2”3/4”1”1.1/4”1.1/2”2”2.1/2”3”4”6”DN1520253240506580100150InchGeneral Remarks:1 - The above actuators have been selected considering an air supply of 80 psi or 5,6 bar.2 - On spring return actuators the N. of springs per side is 5.3 - For different air supply please see Airtorque Catalogue.4 - Bracket and adaptor are dimensioned to fit Airtorque actuators.5 - When air supply for actuator is lower than 5,6 bar bigger actuator must be selected and bracket plusadaptor become special.--------6”8”DN--------200A210.5210.5247.5268.5268.5268.5345345487B677373828697115132221SPRING RETURN ACTUATOR (S10)DIMENSIONS (mm)C102102115127127127157157150 437,5 162,5 196220,5D20202020202030303050E42.542.549.556565669.569.58899F525256.8676767828299105ACTUATORTYPEAT 201 S10ISO F05/F07-CH14AT 201 S10ISO F05/F07-CH14AT 251 S10ISO F05/F07-CH17AT 301 S10ISO F05/F07-CH17AT 301 S10ISO F05/F07-CH17AT 301 S10ISO F05/F07-CH17AT 401 S10ISO F07/F10-CH22AT 401 S10ISO F07/F10-CH22AT 501 S10ISO F10-CH27AT 551 S10ISO F12-CH36BRACKETTYPEST1ST2ST2ST3ST3ST3ST4ST4BT3BT4ADAPTORTYPEA1/BA2/BA2/EA3/AA3/AA3/BA4/AA5/AA5/FA6/B

®TECHNICAL DATADESCRIPTIONDESIGN: TWO PIECES BOLTED CONSTRUCTION - SOLID BALL - ANTI BLOW OUT PROOF STEM DESIGN - ENCAPSULATED SOFTSEATS - ANTISTATIC DEVICE - ISO 5211 ON THE TOP FOR EASY AUTOMATION - FIRE TEST APPROVED.SIZE : DN 15÷150 FULL BORE DN 150-200 REDUCED BORE1/2”÷6” FULL BORE 6”-8” REDUCED BORECLASS : ASME 150 - 300 LBS or PN 16 - 25 - 40MATERIALS : ASTM A105 - LF2 - 316 AND SPECIAL MATERIALSCONSTRUCTION : ASME B16.34 - BS5351 - API6DMARKING: MSS SP25CE 0038: ACCORDING TO DIRECTIVE 97/23/CE - MODULE H CATEGORY III - NOTIFIED BODY LLOYD’S REGISTEREDCERTIFICATE NR. RPS 01060304/01Ex IM2/II 2GD : ACCORDING TO ATEX 94/9 CE - TECHNICAL FILE NR. ST01 ATEXTEST CERTIFICATE : UNI EN 10204 TYPE 3.1B UNLESS OTHERWISE REQUIREDFIRE TEST APPROVED : BS6755 PART 2 - API607 - API6FASERVICE: FOR PETROLEUM, CHEMICALS, PETROLCHEMICALS AND ALLIED INDUSTRIESMAX. WORKING PRESSURE AND PRESSURE TEST OF VALVES VALUES FROM API 6D - API 6AMAXIMUMOPERATINGPRESSUREPRESSURECLASSOF VALVE-29 to 38°C-20 to 100°CANSI ANSI PN PN PN150 300 16 25 40Bar 19 49.6 16 25 40Psig 275 720 232 363 580Kpa 1900 4960 1600 2500 4000For temperatures below-20°F or -29°Cthe rating shall be nogreater than the ratingshown for-20°F or -29°C.PRESSURE TEST1HYDROSTATICSHELL TESTHYDROSTATICSEATS TESTAIRSEATS TESTBar 29 76 25 40 60Psig 425 1100 363 580 870Bar 21 55 18 28 44Psig 300 800 261 406 638Bar±1 6 6 6 6 6Psig±10 80 80 80 80 801 Non visible leakage under all test pressures sequence.1 bar=100Psig 1 Psig=0,06894757 bar 1 bar=14.5 Psig The test pressure listed above are not valve operating pressure.DURATION TEST2 minutes2 minutes2 minutesFLOW DATAThe following flow rates were determined for ball valves in fully open positionand a water temperature of 60°F (15°C).Kv value is the full capacity flow rate through the ball valve in cubic metres per hour(m 3 /h) with a pressure drop of 1 bar.Cv value is the full capacity flow rate through the ball valve in gallons/min of water at60°F with a pressure drop of 1psi.VALVESIZE1/2”153/4”201”251.1/4”321.1/2”402”502.1/2”653”804”1006”150Cv 12 30 45 78 115 265 445 680 1989 4797Kv 10 26 38 67 99 227 381 583 1700 4100DIFFERENT CONFIGURATIONSLOCKING DEVICE FUGITIVE EMISSION EXTENTION STEM