12.07.2015 Views

1 - Al Kossow's Bitsavers

1 - Al Kossow's Bitsavers

1 - Al Kossow's Bitsavers

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

TMS2532, SMJ253232,768-BIT ERASABLE PROGRAMMABLE READ-ONLY MEMORIESoperationSince these EPROMs operate from a single + 5 V supply (in the read model. they are ideal for use in microprocessorsystems. One other ( + 25 V) supply is needed for programming but all programming signals are TTL level, requiringa single lams pulse. For programming outside of the system, existing EPROM programmers can be used. Locationsmay be programmed singly, in blocks, or at random. Total programming time for all bits is 41 seconds.FUNCTION(PINS)ReadMODEOutputStartInhibitPower DownDisable Programming ProgrammingPD/~ VIL VIH VIH Pulsed V,H VIH(20) to V,LVpp +5V +5 V +5V +25 V +25V(21)Vec +5V +5V +5V +5V +5V(24)Q Q HI·Z HI·Z D HI-Z(9 to 11,13 to 17)read/out disableWhen the outputs of two or more '2532s are connected on the same bus, the output of any particular device in thecircuit can be read with no interference from the competing outputs of the other devices. The device whose outputis to be read should have a low-level TTL signal applied to the PD/PGM pin. <strong>Al</strong>l other devices in the circuit shouldhave their outputs disabled by applying a high-level signal to this pin. Output data is accessed at pins Ql through Q8.power downm"'U::Do~c

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!