NXAMP4x1 & NXAMP4x4 User Manual - Nexo

MENU DESCRIPTIONAdjusting Array EQThe Array EQ of each channel can be adjusted from the Array EQ menu. Bellow is a pictureof this menu.The Array EQ value can be read on the top of the LCD screen for each channel (unit is dB).To change the Array EQ for a given channel, select the channel first by pressing thecorresponding “select” button. The channel name on screen will then be put betweenbracket (see on the picture above, channel 2 is selected). Then turn the wheel to changethe Array EQ setting (from – 6 dB to + 6 dB).You can select multiple channels by pressing several “select” buttons at the same time.When a selected channel reaches the maximum value, it will cease to increase bycontinuing to turn the wheel, but other selected channels may still increase the setting: becareful not to change a gap between two channel settings when selecting multiple channelsat the same time.In some special circumstances (cardioids setups for example) it is mandatory to have sameArray EQ settings on two or more channels. Then, changing the Array EQ on one of thesechannels will automatically adjust the Array EQ on the other channels.Adjusting HeadroomThe headroom of each channel can be adjusted from the headroom menu. Bellow is apicture of this menu.The headroom value can be read on the top of the LCD screen for each channel (unit isdB). To change the headroom for a given channel, select the channel first by pressing thecorresponding “select” button. The channel name on screen will then be put betweenbracket (see on the picture above, channel 2 is selected). Then turn the wheel to changePAGE 42 OF 103