NXAMP4x1 & NXAMP4x4 User Manual - Nexo

MENU DESCRIPTIONMENU DESCRIPTIONThe diagram bellow shows the internal structure of the menus accessible by the user fromthe front panel. Follow the arrow corresponding to the “A” or “B” button for each menu toenter the next one.NXAMP StartupNothing pressed A+B pressedOptions1.Systm ConfigChoose Cabinet Setup2.Input Patch3.Save/RecallBBA A A A AB B BDefault Display Volume Delays GainsArray EQABHeadroomA4.Security5.GPIO ModeB6.Load Monitor7.MiscellaneousDefault display is the display of the current setup number (each setup has a uniquenumber inside for each LOAD revision) and setup name (see picture bellow). After twominutes of inactivity, the display will go back to the default display.0. FLAT - NO PROTN.[4 ch amplifier] ~~Changing Cabinet FamilyIn order to prevent end-user changing between different NEXO systems set-ups duringuse, the following procedure is recommended. This procedure has been purposely designedto avoid any mistakes. It is nevertheless very easy to change set-up among the samefamily or between families (see further, “System config”).42. GeoD PA WBBack1-3 Front2-4~~OKPAGE 38 OF 103