NXAMP4x1 & NXAMP4x4 User Manual - Nexo

MENU DESCRIPTIONAfter a few seconds, the display will show the output speakon letter automatically.Then a little bit later the display will change to the Speakon pinout.Then a blank display is inserted, and the first display (routing to “PS10R2”) is displayedagain.Now another example using the setup PS10R2 (2-4) and LS600 (1-3). In that case, themain and the sub are supposed to share the same speakon cable. The ‘Input Patch’ submenu in the “Options” of the NXAMP will then display the following:Note that the position of the text shows that output speakon A (1rst column) and outputspeakon C (3 rd column) should be used for connecting the LS600. This is confirmed in thenext display.PAGE 51 OF 103