30-190 lb. Milnor Dryers Brochure - Steiner-Atlantic

More documents

Recommendations

Info

M30V-M190SMART DESIGNRoller drive for reliability.Some dryers use thesame type of driveand support as 400lb. dryers. There’s nomaintenance-pronegear box either.(Feature availableon M96, M122,M175, and M190.)High Performance Dryerswith the features you need.Roller drive givesbetter cylinder support,contributes to long life.M82M96M78M758VM50VM122M130M170MORE VALUESpeed boosts productivity.The M96 can dry approximately 165 lbsan hour, accommodating loads from Milnorwasher-extractors.* Diameter is 42 inches—forbetter lift and drop, more exposure to hot air.The M96 boosts productivity by drying quickly.Heat input is an impressive 350,000 btu/hour,with 2,700 cfm airflow (and a 3HP blowermotor) for the highest heat exchange in its field.The M122 has a heat input of 415,000 btu/hour with 2,800 cfm airflow.*Depending on fabric typeand load size.350,000 btu/hour2,700 cfmServicing is done from thefront; saves time and space,reduces risk.M175M30V & M115 not picturedM190Fits through 36” door.The M30V, M50V, M78 and the M96 can move througha 36” steel door frame. The top console is removable.It’s front-serviceable!The entire front panel can be removed from somemachines so maintenance can be performed from thefront. It’s a time-saving convenience for service - and asafety benefit. Lint is removed from the front through alarge capacity lint drawer. (Feature available on M96,M115, M122, M175, and M190.)Saves space.Surprisingly,these dryers aremore compactthan other dryers.They installclose to the wallbecause there’slittle to servicefrom the rear ofthe machine.17’ - 0”Folding andstacking table14’ - 0”60 lb.washerextractor95 lbdryer40 lb.washerextractor75 lbdryerPLUS...Get these benefits, also.Phase 7 microprocessor: This innovativecontrol has many user-friendly and safetyorientedfeatures.Reversing basket: To help prevent tangling,the basket reverses rotation on most models.Built tough: The cabinet is electrostaticallypainted inside and out, and all componentsare painted before assembly for thoroughprotection.Fully enclosed cabinet: This design,combined with insulation, improves efficiencyby capturing radiant heat and using it to dry.Also improves working conditions.Other standard features: Included arehot surface ignition (fast and reliable),rotation sensor, and 24-volt controls.
THE FEATURES YOU NEED.NEW CONTROLPROMOTES SIMPLICITY,EFFICIENCY, SAFETY.Phase 7 MicroprocessorThis innovative control has:Efficient Automatic or Manual ModeAutomatic drying helps prevent over-drying and helpseliminate guesswork.Smart Lint MonitorFor models with lint drawers, the control automaticallyprompts the operator to clean the lint. If signals areignored, the dryer will not operate after a maximumnumber of cycles.Ignition RetriesIf the dryer doesn’t ignite, it will wait and try again—up totwo retries.Anti-wrinkle CooldownWhen drying time has ended, this mode tumbles the goodswithout heat to reduce wrinkling and significantly reduce therisk of spontaneous combustion.Informative DisplayDisplay allows you to view drum temperature anddrum RPM. You can also preview all operations of preprogrammedcycles and see troubleshooting information.Safety FeaturesPhase 7 technology provides a Fire Suppression System(cold weather FSS optional) to protect against fire damagecaused by spontaneous combustion. The system senses anabnormal rise in temperature and quickly activates a waterjet system and turns the basket to extinguish the fire. If forsome reason the fire re-ignites, FSS will reactivate to ensurethe fire is completely out.Additional safeties include multi-point high temperaturemonitoring that will shut off the burner if the temperatureexceeds the set point parameters.M30VM50VM758VM78M82M96M115M122M130M17030-190 LBS.A good match for Milnor 25 lb. washer-extractors. This dryer has a heatinput of 100,000 btu/hr (gas) and a 3 phase reversing basket. The M30is available in gas, electric, or steam.This 50 lb. model has a heat input of 150,000 btu/hour and fits througha 36” door. Phase 7 microprocessor is standard or dual timer. Thismodel is available in gas, electric or steam.A popular size, especially when replacing existing 75 lb. dryers.Airflow is 1,000 cfm (gas) with 175,000 btu/hour heat input. Phase 7microprocessor or dual timer. Available in gas, electric or steam models.This 75 lb. model fits through a 36” door (its 35” deep with dryerdoor removed). It has a huge, 44.5” basket diameter (compared tocompetitor’s 37”)—for better lift and drop, more exposure to hot air, andmore even heat distribution. Available in electric and gas (gas—1,200cfm airflow, and 204,000 btu/hour heat input).Fast drying results from 1,700 cfm (steam) and 270,000 btu/hour (gas).Belt-driven fan is quiet and smooth. A good match for smaller Milnorwasher-extractors. Available in gas or steam.This 95 lb. model fits through a 36” door (its 34” deep with dryer doorremoved). Gas and Phase 7 microprocessor only—2,700 cfm airflowand 350,000 btu/hour.An excellent replacement dryer (doesn’t require compressed air), thismodel fits through a 48” door and is a perfect match for an 80 lb.washer-extractor.Is an excellent match for a 80- or 100- lb. capacity washer-extractor.Features roller drive for cylinder support.This 120 lb. model has a heat input of 375,000 btu/hour. A 12” exhaustis available on M130DR gas model (ideal for a replacement dryer).With a 51.2 cu. ft. basket, the M170 is ideal for Milnor 140 and 160 lb.washer-extractors. Fast drying results from 3,700 cfm airflow (gas) and550,000 btu/hour heat input. Phase 7 microprocessor or dual timeravailable with gas model, Phase 7 with steam model. Top and transitionduct are removable for installation.M175This dryer delivers high volume with a small footprint. It only needs 19.7sq. ft. of space to dry 350 lbs. of poly-cotton sheets per hour. Fast dryingresults from 3,700 cfm airflow (gas) and 550,000 btu/hour heat input.M190Milnor’s 190 lb. dryer dries fast through 590,000 btu/hour and 4,200cfm (gas). Top section and transition duct can be removed for ease ininstallation. The dryer is only 51.12” deep, yet has a 61.2 cu. ft. basket.
Page 1: 30-190 LB. DRYERSMORE RELIABILITY

30-190 lb. Milnor Dryers Brochure - Steiner-Atlantic

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?