Knowledge Advisor - catia

Creating a Design Table from a Pre-existing FileA design table can be created from a pre-existing file:either by associating automatically the document parameters with the table columns. All the parameters commonto your document and the input file columns are added to the design tableor by associating one by one the document parameters with the input file columns.Associating Automatically Table Columns with Parameters1.2.3.4.Open the KwrStartDocument.CATPart document.Click the Design Table icon in the standard toolbar.The "Creation of a Design Table" dialog box is displayed. Enter a name (DesignTable1 for example) and acomment.Check the 'Create a design table from a pre-existing file' option. Click OK.Select the KwrBallBearing.xls file. Click Open. The following dialog box is displayed.5.Click Yes. The Material parameter is the only one which is common to the document parameters and tothe external design table. The following design table is created. The '' symbols denote the currentconfiguration.6.7.Select the configuration you want to apply to the document (line 5 for example). Click Apply.The Iron parameter value is displayed in the specification tree.Click OK to end the design table creation. KwrDesignTable1.CATPart is the resulting document.