Knowledge Advisor - catia

1.2.3.In the "Formulas" dialog box, right-click the value field in 'Edit name, value orformula'.Select the Tolerance function from the contextual menu. Then select Edit. A dialogbox is displayed. The default values are those specified in theTools->Options->Tolerance tab for the Length and Angle parameters.Enter the maximum and minimum tolerance values.Modifying the Increment/Decrement AmountIn the parameter value field of 'Edit name, value or formula', the arrow buttons can be used toincrement or decrement values by a certain amount. You can modify the amount beingincremented or decremented.1.2.3.4.In the "Formulas" dialog box, right-click the value field in 'Edit name, value orformula'.Select the 'Change step' function from the contextual menu.Select one of the amount displayed.If the new amount you want to apply to the value field is not displayed, select 'newone' and enter the new amount in the box which is displayed.5.Click Enter to apply the new amount to the value field.Note that, in addition to the initial increment/decrement amount (1 in the figure above) andto the 'new one' option, the 'Change step' option displays the list of increment/decrementamounts which have already been declared.Specifying Lower and Upper BoundsSpecifying lower and upper bounds provides you with a means to be warned whenever aparameter value is out of range.