Knowledge Advisor - catia

or, in the "Formulas" dialog box, select the Machining_Time parameter,then modify its value in 'Edit name, value or formula'.The resulting document is KwrParam0.CATPart.The parameter list displayed in the "Formulas" dialog box depends:on the current feature. For example, if you select Pad.1 in theKwrStartDocument.CATPart specification tree, the list will contain only thePad.1 parameters. If you select the document global feature by clickingKwrStartDocument, all the document parameters will be displayed in the list.on the option selected for the Filter field of the "Formulas" dialog box. Settingthe All option displays all the parameters of the current feature. Setting the Useroption displays only the parameters you have added to your document with the'New Parameter of type' button.When editing a parameter, a number of functions can be accessed from the contextualmenu of the value field(s). These functions allow you to add attributes to the parameterand to manipulate the formula which constrains the parameter (when this formulaexists). In addition, when a parameter value is constrained by a formula, the "EditParameter" dialog box displays a formula icon that allows you to edit the formula.When a parameter value is driven from a design table , the "Edit Parameter" dialogbox displays a design table icon that allows you to edit the design table.To display parameter values in the geometry area, you must have the "Formulas"dialog box open and select a feature in the specification tree. Selecting a parameter inthe parameter list will highlight this parameter in the geometry area.