Knowledge Advisor - catia

More documents

Recommendations

Info

4.5.Click OK in the "Formula Editor" once your relation is typed. The Formula.1 relation is added to the specification tree.In the parameter list of the dialog box:a formula is now associated with the pad radiusthe new Relations\Formula.1\Activity parameter is added.In the parameter list, select the PadLength item, click 'Add Formula' to create the formula below:PadLength = PartBody\Pad.1\FirstLimit\Length + PartBody\Pad.1\SecondLimit\LengthIn the parameter list, the Formula.2 relation is now associated with the PadLength user parameter. In the specificationtree, PadLength is also displayed with the value resulting from Formula.2. This is now what you should see in thespecification tree under "Relations":6.Click OK in the "Formulas" dialog box to terminate this task. Keep your document open and proceed to the nexttask.RulesUnlike the parameter and formula capabilities which are available to all CATIA users, the rule and check capabilities require theKnowledge Advisor product. This task is a way to introduce the Knowledge Advisor rules without getting bogged down in details.For more information on rule-related tasks, refer to Rules.1.Select the KwrStartDocument item in the specification tree, then access the Knowledge Advisor workbench (selectKnowledge Advisor workbench from the Start->Infrastructure menu).2.Click therule icon. The following dialog box is displayed:3. Replace the Rule.1 string with Cylinder_Rule and click OK. The "Rule Editor" is displayed.
4. Type the code below into the edition box or copy/paste it from your browser to the edition box.5.6.PartBody\Hole.1\Activity = trueif PadLength 20mm{PartBody\Hole.1\Diameter = 20mmMessage("PadLength is: # | Internal Diameter is: #",PadLength,PartBody\Hole.1\Diameter)}else if PadLength > 50mm and PadLength < 100mm{PartBody\Hole.1\Diameter = 50mmMessage("PadLength is: # | Internal Diameter is: #",PadLength,PartBody\Hole.1\Diameter)}else if PadLength >= 100mm{PartBody\Hole.1\Diameter = 80mmMessage("PadLength is: # | Internal Diameter is: #",PadLength,PartBody\Hole.1\Diameter)}else{PartBody\Hole.1\Activity = falseMessage("PadLength is: # | Internal Diameter is: #",PadLength,PartBody\Hole.1\Diameter)}Click Apply. An information window displays the PadLength and Pad internal diameter values. Click OK in theInformation window. The Cylinder_Rule relation is added to the specification tree.Click OK to terminate this part of the dialog. Keep your document open and proceed to the next task.ChecksThe Knowledge Advisor product is required. Refer to Checks for more information on checks and check-related tasks.1.2.Click the icon. The first "Check Editor" dialog box is displayed.Replace the Check.1 string with Cylinder_Check,then click OK. The "Check Editor" box is displayed. It is similar to the Rule Editor.3. Select the Information item in the 'Type of Check' list.4. Enter a string in the message field (for example: Pad too short). This message is to be displayed whenever thestatement specified by the check is not fulfilled.5. Enter the following statement into the edition box:PadLength > 20mm6. Click Apply. The Cylinder_Check relation is added to the specification tree. A green icon in the specification treemeans that the check is fulfilled. No message is displayed.7. Click OK to confirm the check creation.8. Change the Pad limits so that PadLength
Page 1 and 2: Knowledge AdvisorPrefaceWhat's New?
Page 3 and 4: HighlightsThe CATIA knowledgeware c
Page 5: The CATIA Knowledge AdvisorDocument
Page 8 and 9: Getting Started: CATIA Knowledgewar
Page 12 and 13: is no longer valid.The resulting do
Page 14 and 15: The functions related to parameters
Page 16 and 17: The user parameter values are displ
Page 18: About FormulasFormulas are features
Page 21 and 22: Using the Knowledge InspectorThe Kn
Page 23: Whatever the edition box, right-cli
Page 26 and 27: or, in the "Formulas" dialog box, s
Page 28 and 29: 1.2.3.In the "Formulas" dialog box,
Page 30 and 31: Specifying the Material Parameter V
Page 32 and 33: Updating the Mechanical_PropertyPar
Page 34 and 35: Deleting a ParameterThe only parame
Page 36 and 37: ororIn the specification tree, righ
Page 38 and 39: At this stage of the dialog:the For
Page 40 and 41: 1. Click OK to exit the "Formulas"
Page 42 and 43: Deleting a FormulaYou can delete a
Page 44 and 45: Enter the check name and comments.
Page 46 and 47: Programming RulesThe Knowledge Advi
Page 48 and 49: The Rule editor provides you with t
Page 50 and 51: The formula editor provides you wit
Page 52 and 53: Search FunctionDescriptionSyntaxSea
Page 54 and 55: Length FunctionDescriptionSyntaxRet
Page 56 and 57: ReplaceSubText FunctionDescriptionR
Page 58 and 59: ToLower FunctionDescriptionChanges
Page 60 and 61:
CellAsBoolean FunctionCode sampleIn
Page 62 and 63:
LocateInColumn FunctionCode sampleI
Page 64 and 65:
MinInColumn FunctionCode sampleInpu
Page 66 and 67:
CloserValueInfInColumn FunctionCode
Page 68 and 69:
5.6.Select a type of check. Enter t
Page 70 and 71:
Advanced TasksAmong the knowledgewa
Page 72:
The Tabulated Text File FormatHere
Page 75 and 76:
CellAsRealReturns the contents of a
Page 77 and 78:
5.6.Click OK. A file selection box
Page 79 and 80:
Creating a Design Table from a Pre-
Page 81 and 82:
Selecting a parameter or an associa
Page 83 and 84:
CloserSupConfig FunctionDescription
Page 85 and 86:
Using a Design TableA design table
Page 87 and 88:
Creating a BehaviorA behavior is a
Page 89 and 90:
Manipulating Feature AttributesNot
Page 91 and 92:
The Knowledge Advisor Menu BarWorkb
Page 93 and 94:
CutCopyPasteCutting and Pasting Obj
Page 95 and 96:
Search Order...Creating a Document
Page 97 and 98:
In the "Formulas" dialog box, right
Page 99 and 100:
In the parameter list of the "Formu
Page 101 and 102:
Edit/modify a checkIn the specifica
Page 103 and 104:
LocateInColumnReturns the index of
Page 105 and 106:
Here are some details about the par
Page 107 and 108:
1.2.3.4.Click the icon.Create a new
Page 109 and 110:
GlossaryMany of the definitions inc
Page 111 and 112:
KknowledgewareThe set of software c
show all

Knowledge Advisor - catia

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?