PulsaJet® Automatic Spray Nozzle - Spraying Systems Co.

PulsaJet ® AutomaticSpray NozzleFeaturesElectrically-actuated hydraulic atomizing valveCycle duration from 6 ms (.006 seconds) to continuous sprayAccepts UniJet ® tip sizes up to -03 capacity. Request ourIndustrial Spray Products Catalog for standard UniJet spray tipspecifications.Built-in mounting bracket accepts #8-32 UNC orM4 threaded screwsWetted parts are constructed of stainless steel, PEEK and PPSfor maximum chemical resistance; seals are FFKM(perfluoroelastomer)Complies with appropriate EC (ATEX and CE) and U.S. Zonesafety directives for flameproof enclosure and encapsulationMaximum cycles per minute: 10,000 with AutoJet ®Spray ControllerPower: 27 VDC max. actuation, 0.3 AMP fuseInlet connection: 1/8” NPT or BSPTDual ports allow flow through operation or fluid recirculationMaximum operating pressure: 100 psi (7 bar)Maximum flow rates: .47 gpm at 100 psi (1.8 l/min at 7 bar)Ambient temperature range: -4°F to 104°F (-20°C to 40°C)Weight: 30 oz. (.85 kg)for Zone 1 Hazardous LocationsProvides accurate spray placement andspray pattern integrity in high-speed orlow-capacity applicationsBenefits• High-speed capability, up to 10,000 cycles per minute, enablesfaster line speeds and increased productivity• Ability to safely spray alcohol- and solvent-based fluids inzone 1 rated hazardous areas• Using Pulse Width Modulated (PWM) flow control, flow ratecan be controlled very precisely by cycling the PulsaJetspray nozzle on and off very quickly at a controlled frequency.With PWM flow control:• Flow rate can be changed almost instantaneously• Extremely high flow turndown ratios can be achieved at asingle pressure• Relatively low flow rates can be generated with larger,clog-resistant spray tips• Minimizes overspray and saves costly fluid consumption• Wide range of flow rates available from a single tip• Provides flexibility in the design of high-speed, low-capacityspray applications• Certified by FM ApprovalsTypical ApplicationsLubricatingDispensingCoatingMarking1.800.95.SPRAY | Intl. 1.630.665.5000 | www.spray.com

AA10000AUH-03-Z1 PulsaJet ® Automatic Spray NozzlePulsaJet Spray Nozzlesand AutoJet ® Spray ControllersWhen paired with AutoJet Spray Controllers, the AA10000AUH-03-Z1 PulsaJet automaticnozzle is capable of fast on/off operation at extremely high speeds – up to 10,000 cyclesper minute. These fast cycle times are critical for very precise conveyor belt spraying.1/2” NPT(M)CONDUIT PORTM12x1.5CABLE GLANDEX d RATINGINLET PORT1/8” BSPT(2 PLACES)INLET PORT1/8” NPT(2 PLACES)4-1/8”[104.5 mm]3-3/4”[95.4 mm]AA10000AUH-03-Z1AAB10000AUH-03-Z1Order Numbers and Ratings(NPT)AA10000AUH-03-Z1(BSPT)AAB10000AUH-03-Z1Class I, Zone 1AEx d mb IIB T4 GbII 2 GEx d mb IIB T4 GbFM10ATEX0040XNorth Avenue and Schmale Road, P.O. Box 7900, Wheaton, IL 60187-7901 USATel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842www.spray.comSprayNozzlesSprayControlSprayAnalysisSprayFabricationBulletin No. 692 Printed in the U.S.A. ©Spraying Systems Co. 2011