INDETSHOCK TS - Austin Detonator sro

INDETSHOCK TSTunnel-Series Delay Non-Electric DetonatorNon-ElectricDESCRIPTIONINDETSHOCK Tunnel Series detonator products areavailable in a sequence of 40 whole number periodsfrom 25 ms to 9000 ms.Austin’s TS delay sequence is appropriate for applicationssuch as tunneling and shaft or raise miningwhere long delays are required between holes toallow for movement of broken rock.They are designed to be used as down-hole detonatorsfor the initiation of cast boosters, high explosivesor pneumatically loaded ANFO. In-hole delaysmay be equipped with a T-connector for compatibilitywith detonating cord initiation.BENEFITS• 720 mg base charge of PETN / RDX to ensure strong initiation energy under even the most extreme conditions.• Delay composition encased in a steel jacket to prevent performance loss due to transient pressure from nearbydetonating holes.• Delay time quality controls to ensure greater than 99% probability of in-sequence initiation.• Equipped with a delay tag that lists delay time, delay period and length of the detonator shock tube.• Resistant to foreign sources of energy.• Protected primary explosive charge.PROPERTIESDelay sequenceDelay #011 1/222 1/233 1/244 1/25Nominal Delay (ms)25100150200250300350400450500Delay #5 1/266 1/277 1/288 1/299 1/210Nominal Delay (ms)5506006507007508008509009501000Delay #11121416182025303540Nominal Delay (ms)1100120014001600180020002500300035004000Delay #45505560657075808590Nominal Delay (ms)4500500055006000650070007500800085009000T R A D I T I O N O F S A F E T Y , S T R E N G T H A N D S E R V I C E

I N D E T S H O C K T SSTANDARD TECHNICAL DESCRIPTIONNameINDETSHOCK TSDetonator shell materialAluminumDelay interval (ms) 25 / 50 / 100 / 200 / 500Number of delays 40Base charge720 mg PETN or RDXPrimary chargedextrinated lead azideProducer’s mark (shell bottom)VCrimpingtriple crimpPlugconductive rubberShock tube materialSurlyn/PEColorYellowLengths of shock tubevarious at customer’s requestDelay tag markingElectrostatic resistivitydetonator type (short title), nominal delay20 kV, 500 pF1 kV AC/50 Hz/60 secWater pressure resistivity0,3 MPa/7 daysMechanical strenght of det. assembly > 40 NTemperature range for application -30 O C < T < +60 O CShelf live (storage conditions)2 years (-30 O C to +40 O C) in original sealed packageTransport Classification 1.1B 1.4B 1.4S (at special request)UN No. 0360 0361 0500 (at special request)Official authority & alt. names CE mark NameCE 0589 EXP. 1651/00 Indetshock TSDisclaimer of Warranties and Limitations of LiabilitiesProduct described in this bulletin are sold by Austin Detonator s.r.o. without warranty; express implied or statutory or as to MERCHANTABILITY, except as expressly stated in Austin Detonatorstraight bill of lading. Under no circumstances shall seller be liable for loss of anticipated profits, consequential or incidental damages.The product described may be subject to change.For more information and service locations in your area, please contact:Austin DetonatorPhone: +420 571 404 001Jasenice 712Fax: +420 571-404 002755 01 VsetínWeb: www.austin.czCzech Republice-mail: marketing.info@austin.cz© Austin Detonator | v. 100114