NGC-30 - Pentair Thermal Management

NGC-30Typical Configurations for the DigiTrace NGC-30Individual Controls with Ground-fault Trip/Current/Temperature Monitoring• Monitors ground-fault current andalarms/trip control contactor uponfault• Monitors heater current and alarmsupon low or high current conditions• Monitors pipe temperature (via RTDinputs wired back to the DigiTraceNGC-30) and alarms upon low orhigh currentconditionNGC-UIT2NGC-30-CRM/CRMS1 7 2 8 3 9 4 10 5 11 6 12CNGC-30-CTMPanelboardRTDPipeHeatingcableIndividual Controls with RMM2 for Ground-fault Trip/Current/Temperature Monitoring with Networked RTDs• Monitors ground-fault current andalarms/trip control contactor uponfault• Monitors heater current and alarmsupon low or high current conditions• Monitors pipe temperature (via RTDinputs wired back to the DigiTraceNGC-30) and alarms upon low orhigh current conditions• Using optional RMM2 (remotemonitoring modules) mounted in thefield, up to 128 RTD inputs can beadded to the NGC-30 system.• The RMMs allow the RTD cables tobe terminated locally and only a singleRS-485 twisted wire pair broughtback to the panel. This results in asignificant reduction in field wiring.NGC-UIT2NGC-30-CRM/CRMS1 7 2 8 3 9 4 10 5 11 6 12CRTDNGC-30-CTMPanelboardIndividual Ambient or PASC Control with Ground-fault Trip/Current/Temperature Monitoring• Monitors ground-fault current andalarms/trip control contactor uponfault• Monitors heater current and alarmsupon low or high current conditionsNGC-30-CRM/CRMSAmbientRTDRS-485PipeHeatingcablePipeHeatingcableRMM2RemotemonitoringmoduleNGC-UIT21 7 C2 83 9 4 10 5 11 6 12NGC-30-CTMPanelboard8 / 12EN-DigiTraceNGC30-DS-H58670 09/13THERMAL MANAGEMENT SOLUTIONS