DX-9100 Digital Controller, Version 2 - Tech-System
DX-9100 Digital Controller, Version 2 - Tech-System DX-9100 Digital Controller, Version 2 - Tech-System
Metasys European Sales Resource ManualApplication Specific Controllers SectionProduct BulletinIssue Date 0905DX-9100 Digital Controller, Version 2The DX-9100 digital controller is the ideal digitalcontrol solution for multiple chiller or boiler plantcontrol applications, for air handling units or fordistributed lighting and related electricalequipment control applications.As a standalone controller, the DX has both thehardware and software flexibility to adapt to thecontrol requirements in its targeted applications.Along with its outstanding control flexibility, thecontroller can extend its input and output pointcapability by communicating with input/output (I/O)extension modules on an extension bus. Thecontroller provides monitoring and control of allconnected points at an integral LED display andkeyboard or from a separate DT-9100 display unit.The DT-9100 display unit, with a text and graphicLCD screen and keypad, provides a standard andcustomized presentation of data according to theapplication and customer requirements.Both the DX-9100 controller and the DT-9100display unit can be mounted within an electricalenclosure or in a cabinet door, and the DT-9100display unit can also be mounted directly onto thecontroller within a panel, on a wall or can be usedas a portable device.When the DX controller is integrated into aMetasys ® system, point and control information isavailable throughout the network and at allMetasys operator workstations.Figure 1: DX-9100-8454Figure 2: DT-9100-8204Features and Benefits Full set of control algorithms in software modules Graphic configuration tool Standalone control Real-time clock and time programs Trend data storage Extension bus for additional I/O points Extension modules for a variety of analog anddigital I/O combinationsEasy to configure for a wide range of standardand special applicationsDistributed control for system reliabilityModular hardware set for low-cost installationin the various applicationsContinued on the next page…© 2005 Johnson Controls, Inc. 1Order No. MET-SRM-C4-16
Features and Benefits (Cont.) Model with integral display and control panel Text and graphic display unit (DT-9100) – for one orup to eight DX controllers on N2 Bus network Extension modules with manual override switches N2 Bus communications Dynamic data access capabilities with Metasyssystem networkMultiple display and override possibilities areavailable for the controller, close to or remotefrom the controlled equipmentFacility-wide control efficiency andcost-effective information availabilityIP NETWORKNAEADS / ADXWorkstationNAEN2BusDX-9100Black BoxXTXPDT/DX-9100XTXPN2BusDT-9100LCD displayDX-9100 withLED displayXTMXPx XPxX T - BusFigure 3: DX-9100 Digital Controller, Version 2, on the Metasys System Network2 Application Specific Controllers—DX-9100 Digital Controller, Version 2
- Page 4 and 5: Flexible Installation and Display O
- Page 6 and 7: Extension ModulesThe extension (XT-
- Page 8 and 9: Table 1: Point ConfigurationPoint T
- Page 10 and 11: Table 3: Flow Chart Module Configur
- Page 13 and 14: Agency ListingsCE Directive 89/336/
Metasys European Sales Resource ManualApplication Specific <strong>Controller</strong>s SectionProduct BulletinIssue Date 0905<strong>DX</strong>-<strong>9100</strong> <strong>Digital</strong> <strong>Controller</strong>, <strong>Version</strong> 2The <strong>DX</strong>-<strong>9100</strong> digital controller is the ideal digitalcontrol solution for multiple chiller or boiler plantcontrol applications, for air handling units or fordistributed lighting and related electricalequipment control applications.As a standalone controller, the <strong>DX</strong> has both thehardware and software flexibility to adapt to thecontrol requirements in its targeted applications.Along with its outstanding control flexibility, thecontroller can extend its input and output pointcapability by communicating with input/output (I/O)extension modules on an extension bus. Thecontroller provides monitoring and control of allconnected points at an integral LED display andkeyboard or from a separate DT-<strong>9100</strong> display unit.The DT-<strong>9100</strong> display unit, with a text and graphicLCD screen and keypad, provides a standard andcustomized presentation of data according to theapplication and customer requirements.Both the <strong>DX</strong>-<strong>9100</strong> controller and the DT-<strong>9100</strong>display unit can be mounted within an electricalenclosure or in a cabinet door, and the DT-<strong>9100</strong>display unit can also be mounted directly onto thecontroller within a panel, on a wall or can be usedas a portable device.When the <strong>DX</strong> controller is integrated into aMetasys ® system, point and control information isavailable throughout the network and at allMetasys operator workstations.Figure 1: <strong>DX</strong>-<strong>9100</strong>-8454Figure 2: DT-<strong>9100</strong>-8204Features and Benefits Full set of control algorithms in software modules Graphic configuration tool Standalone control Real-time clock and time programs Trend data storage Extension bus for additional I/O points Extension modules for a variety of analog anddigital I/O combinationsEasy to configure for a wide range of standardand special applicationsDistributed control for system reliabilityModular hardware set for low-cost installationin the various applicationsContinued on the next page…© 2005 Johnson Controls, Inc. 1Order No. MET-SRM-C4-16
Change language