WSM User Guide - WatchGuard Technologies

Setting NTP ServersSeeing the properties of a licenseTo see the properties of a license, select the license key and click Properties. The License Propertiesdialog box shows the serial number of the Firebox to which this license applies, along with its ID andname, the Firebox model and version number, and the available Firebox features.Downloading a license keyIf your license file is not current, you can download a copy of any license file from the Firebox to yourmanagement station. To download license keys from a Firebox, select the license key and click Download.A dialog box appears for you to type the status passphrase of the Firebox.Setting NTP ServersNetwork Time Protocol (NTP) synchronizes computer clock times across a network. The Firebox® cansynchronize its clock to an Internet NTP server.1 From Policy Manager, select Setup > NTP.The NTP Setting dialog box appears.2 Select the Enable NTP check box.3 In the box below the NTP Server Names/IPs list, type the IP addresses of the NTP servers you wantto use. Click Add.The Firebox can use up to three NTP servers.User Guide 61