WSM User Guide - WatchGuard Technologies

Viewing Information About Firebox StatusViewing Information About Firebox StatusThere are four tabs that tell about Firebox® status and configuration: Status Report, AuthenticationList, Blocked Sites, and Security Services.Status ReportThe Status Report tab gives you statistics about Firebox traffic and performance.The Firebox Status Report contains this information:Uptime and version informationThe Firebox uptime, the WatchGuard® Firebox System software version, the Firebox model, andappliance software version. There is also a list of the status and version of the productcomponents on the Firebox.Log ServersThe IP addresses of all configured Log Servers.Logging optionsLog message options that are configured with the Quick Setup Wizard or Policy Manager.Memory and load averageStatistics on the memory use (shown in bytes of memory) and load average of the Firebox.The load average has three values that typically show an average over the last minute, 5minutes, and 15 minutes. Values over 1.00 (100%) indicate some threads are queued untilresources are available. (A system load that exceeds 1.00 does not mean the system isoverloaded.)48 WatchGuard System Manager