WSM User Guide - WatchGuard Technologies
WSM User Guide - WatchGuard Technologies WSM User Guide - WatchGuard Technologies
Viewing Number of Connections by PolicyAdding and removing lines in the bandwidth display• To add a line to the Bandwidth Meter tab, select the interface from the Hide list in the ColorSettings section. Use the Text Color control to select a color for the line. Click Add. The interfacename appears in the Show list with the color you selected.• To remove a line from the Bandwidth Meter tab, select the interface from the Show list in theColor Settings section. Click Remove. The interface name appears in the Hide list.Changing colors in the bandwidth displayYou can also change the colors of the display of the Bandwidth Meter tab. Use the Background andGrid Line color control boxes to select a new color.Changing how interfaces appear in the bandwidth displayOne option is to change how the interface names appear on the left side of the Bandwidth Meter tab.The names can appear as a list. The display can also show an interface name adjacent to the line it identifies.Use the Show the interface text as a drop-down list to select List or Tags.Viewing Number of Connections by PolicySelect the Service Watch tab of Firebox® System Manager to see a graph of the policies that are configuredin Policy Manager for a Firebox. The Y axis (vertical) shows the number of connections. The X axis(horizontal) shows the time. If you click any location on the chart, you can get more detailed informationin a pop-up window about policy use at this point in time.1 To change how the policies appear, select File > Settings. Click the Service Watch tab.46 WatchGuard System Manager
Viewing Number of Connections by Policy2 Do one or more of the steps in the sections below.Changing the scale of the policies displayYou can change the scale of the Service Watch tab. Use the Graph Scale drop-down list to select thevalue that is the best match for the volume of traffic on your network. You can also set a custom scale.Type the number of connections in the Custom Scale text box.Adding and removing lines in the policies display• To add a line to the Service Watch tab, select the policy from the Hide list in the Color Settingssection. Use the Text Color control to select a color for the line. Click Add. The interface nameappears in the Show list with the color you selected.• To remove a line from the Service Watch tab, select the policy from the Show list in the ColorSettings section. Click Remove. The interface name appears in the Hide list.Changing colors in the policies displayYou can change the colors of the display of the Service Watch tab. Use the Background and Grid Linecolor control boxes to select a new color.Changing how policy names appear in the policies displayYou can change how the policy names appear on the left side of the Service Watch tab. The names canshow as a list. The tab can also show an interface name adjacent to the line it identifies. Use the Showthe policy labels as drop-down list to select List or Tags.Showing connections by policy or ruleThe Service Watch tab can show the number of connections by policy or rule. If you show by policy,then you can see more than one rule on one line. Use the Show connections by drop-down list toselect a display setting.User Guide 47
- Page 14 and 15: Configuring GAV engine settings ...
- Page 16 and 17: MSSQL-Monitor .....................
- Page 18 and 19: xviiiWatchGuard System Manager
- Page 20 and 21: Fireware Features and ToolsYour org
- Page 22 and 23: WatchGuard System Manager (WSM) Use
- Page 24 and 25: WatchGuard System Manager (WSM) Use
- Page 26 and 27: WatchGuard System Manager (WSM) Use
- Page 28 and 29: Installing WatchGuard System Manage
- Page 30 and 31: Installing WatchGuard System Manage
- Page 32 and 33: Quick Setup Wizardtion, you must ha
- Page 34 and 35: Putting the Firebox into Operation
- Page 36 and 37: Starting WatchGuard System ManagerT
- Page 38 and 39: Upgrading to a New Version of Firew
- Page 40 and 41: Installation Topics• High Availab
- Page 42 and 43: LiveSecurity Service Broadcastslear
- Page 44 and 45: WatchGuard Users ForumAdvanced FAQs
- Page 46 and 47: Product Documentation• Netscape N
- Page 48 and 49: Training and Certification30 WatchG
- Page 50 and 51: Firebox System Manager Menus and To
- Page 52 and 53: Seeing Basic Firebox and Network St
- Page 54 and 55: Seeing Basic Firebox and Network St
- Page 56 and 57: Monitoring Firebox TrafficMonitorin
- Page 58 and 59: Clearing the ARP CacheLearning more
- Page 60 and 61: Using the Performance Console2 From
- Page 62 and 63: Using the Performance ConsoleWorkin
- Page 66 and 67: Viewing Information About Firebox S
- Page 68 and 69: Viewing Information About Firebox S
- Page 70 and 71: Viewing Information About Firebox S
- Page 72 and 73: Using HostWatchWhile the top part o
- Page 74 and 75: Using HostWatchPausing the HostWatc
- Page 76 and 77: Working with Licenses3 Below Option
- Page 78 and 79: Working with Licenses2 Expand Licen
- Page 80 and 81: Setting a Friendly Name and Time Zo
- Page 82 and 83: Changing the Firebox Passphrases10
- Page 84 and 85: Recovering a FireboxTo manually res
- Page 86 and 87: Recovering a Firebox68 WatchGuard S
- Page 88 and 89: Opening a Configuration Fileto a se
- Page 90 and 91: About Firebox Backup ImagesSaving a
- Page 92 and 93: Working with AliasesAlias names are
- Page 94 and 95: Using Global SettingsEnable TOS for
- Page 96 and 97: Managing a Firebox from a Remote Lo
- Page 98 and 99: Managing a Firebox from a Remote Lo
- Page 100 and 101: Setting Up the Log ServerSetting Up
- Page 102 and 103: Setting up the Firebox for a Design
- Page 104 and 105: Setting Global Logging and Notifica
- Page 106 and 107: Setting Global Logging and Notifica
- Page 108 and 109: Types of Log MessagesTypes of Log M
- Page 110 and 111: LogViewer SettingsLogViewer Setting
- Page 112 and 113: Using LogViewerSearching in LogView
Viewing Number of Connections by Policy2 Do one or more of the steps in the sections below.Changing the scale of the policies displayYou can change the scale of the Service Watch tab. Use the Graph Scale drop-down list to select thevalue that is the best match for the volume of traffic on your network. You can also set a custom scale.Type the number of connections in the Custom Scale text box.Adding and removing lines in the policies display• To add a line to the Service Watch tab, select the policy from the Hide list in the Color Settingssection. Use the Text Color control to select a color for the line. Click Add. The interface nameappears in the Show list with the color you selected.• To remove a line from the Service Watch tab, select the policy from the Show list in the ColorSettings section. Click Remove. The interface name appears in the Hide list.Changing colors in the policies displayYou can change the colors of the display of the Service Watch tab. Use the Background and Grid Linecolor control boxes to select a new color.Changing how policy names appear in the policies displayYou can change how the policy names appear on the left side of the Service Watch tab. The names canshow as a list. The tab can also show an interface name adjacent to the line it identifies. Use the Showthe policy labels as drop-down list to select List or Tags.Showing connections by policy or ruleThe Service Watch tab can show the number of connections by policy or rule. If you show by policy,then you can see more than one rule on one line. Use the Show connections by drop-down list toselect a display setting.<strong>User</strong> <strong>Guide</strong> 47