WSM User Guide - WatchGuard Technologies

Using BGPRegion Registry Name Web SiteNorth America ARIN www.arin.netEurope RIPE NCC www.ripe.netAsia Pacific APNIC www.apnic.netLatin America LACNIC www.lacnic.netAfrica AfriNIC www.afrinic.netBGP daemon configurationTo create or modify a routing configuration file, here is a catalog of supported routing commands. Thesections must appear in the configuration file in the same order they appear in this table. You can alsouse the sample BGP configuration file found in this FAQ:https://www.watchguard.com/support/advancedfaqs/fw_dynroute-ex.aspDo not use BGP configuration parameters that you do not get from your ISP.Section Command DescriptionConfigure BGP Routing Daemonrouter bgp [ASN]Enable BGP daemon and setautonomous system number(ASN); this is supplied by your ISPnetwork [A.B.C.D/M]Announce BGP on networkA.B.C.D/Mno network [A.B.C.D/M]Disable BGP announcements onnetwork A.B.C.D/MSet Neighbor PropertiesCommunity Listsneighbor [A.B.C.D] remote-as [ASN]neighbor [A.B.C.D] ebgp-multihopneighbor [A.B.C.D] version 4+neighbor [A.B.C.D] update-source [WORD]neighbor [A.B.C.D] default-originateneighbor [A.B.C.D] port 189neighbor [A.B.C.D] send-communityneighbor [A.B.C.D] weight 1000neighbor [A.B.C.D] maximum-prefix [NUMBER]Set neighbor as member of remoteASNSet neighbor on another networkusing EBGP multi-hopSet BGP version (4, 4+, 4-) forcommunication with neighbor;default is 4Set the BGP session to use aspecific interface for TCPconnectionsAnnounce default route to BGPneighbor [A.B.C.D]Set custom TCP port tocommunicate with BGP neighbor[A.B.C.D]Set peer send-communitySet a default weight for neighbor’s[A.B.C.D] routesSet maximum number of prefixesallowed from this neighbor338 WatchGuard System Manager