WSM User Guide - WatchGuard Technologies

More documents

Recommendations

Info

Using RIP2 In the New Policy Properties dialog box, configure the policy to allow traffic from the IP or networkaddress of the router that uses RIP to the Firebox® interface it connects to. You must also add thenetwork broadcast IP address.3 Click OK.RIP Version 2RIP v2 uses multicast to send routing table updates. To create or modify a routing configuration file,refer to the table of supported RIP routing commands in the section RIP Version 1. Any command thatuses a network IP address must include the subnet mask or RIP v2 will not operate. The sections mustappear in the configuration file in the same order they appear in this table.330 WatchGuard System Manager
Using RIPConfiguring Fireware to use RIP v21 In Policy Manager, select Network > Dynamic Routing.The Dynamic Routing Setup dialog box appears.2 Click Enable Dynamic Routing and Enable RIP.3 Click Import to import a routing daemon configuration file, or type your configuration parametersin the text box.If you click Import, you can browse to the location of the RIP daemon configuration file. It is located inC:\Documents and Settings\My Documents\My WatchGuard.4 Click OK.Allowing RIP v2 traffic through the FireboxYou must add and configure a policy to allow RIP v2 multicasts from the routers that have RIP v2enabled to the reserved multicast IP address for RIP v2.1 From Policy Manager, select Edit > Add Policies. From the list of packet filters, select RIP. Click Add.The New Policy Properties window appears for RIP.User Guide 331
Page 1:
WatchGuard ® System ManagerUser Gu
Page 4 and 5:
Installation Topics ...............
Page 6 and 7:
Restoring a Firebox backup image ..
Page 8 and 9:
Setting Blocked Sites .............
Page 10 and 11:
Exporting Reports .................
Page 12 and 13:
Configuring a Gateway .............
Page 14 and 15:
Configuring GAV engine settings ...
Page 16 and 17:
MSSQL-Monitor .....................
Page 18 and 19:
xviiiWatchGuard System Manager
Page 20 and 21:
Fireware Features and ToolsYour org
Page 22 and 23:
WatchGuard System Manager (WSM) Use
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Installing WatchGuard System Manage
Page 30 and 31:
Installing WatchGuard System Manage
Page 32 and 33:
Quick Setup Wizardtion, you must ha
Page 34 and 35:
Putting the Firebox into Operation
Page 36 and 37:
Starting WatchGuard System ManagerT
Page 38 and 39:
Upgrading to a New Version of Firew
Page 40 and 41:
Installation Topics• High Availab
Page 42 and 43:
LiveSecurity Service Broadcastslear
Page 44 and 45:
WatchGuard Users ForumAdvanced FAQs
Page 46 and 47:
Product Documentation• Netscape N
Page 48 and 49:
Training and Certification30 WatchG
Page 50 and 51:
Firebox System Manager Menus and To
Page 52 and 53:
Seeing Basic Firebox and Network St
Page 54 and 55:
Seeing Basic Firebox and Network St
Page 56 and 57:
Monitoring Firebox TrafficMonitorin
Page 58 and 59:
Clearing the ARP CacheLearning more
Page 60 and 61:
Using the Performance Console2 From
Page 62 and 63:
Using the Performance ConsoleWorkin
Page 64 and 65:
Viewing Number of Connections by Po
Page 66 and 67:
Viewing Information About Firebox S
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Using HostWatchWhile the top part o
Page 74 and 75:
Using HostWatchPausing the HostWatc
Page 76 and 77:
Working with Licenses3 Below Option
Page 78 and 79:
Working with Licenses2 Expand Licen
Page 80 and 81:
Setting a Friendly Name and Time Zo
Page 82 and 83:
Changing the Firebox Passphrases10
Page 84 and 85:
Recovering a FireboxTo manually res
Page 86 and 87:
Recovering a Firebox68 WatchGuard S
Page 88 and 89:
Opening a Configuration Fileto a se
Page 90 and 91:
About Firebox Backup ImagesSaving a
Page 92 and 93:
Working with AliasesAlias names are
Page 94 and 95:
Using Global SettingsEnable TOS for
Page 96 and 97:
Managing a Firebox from a Remote Lo
Page 98 and 99:
Managing a Firebox from a Remote Lo
Page 100 and 101:
Setting Up the Log ServerSetting Up
Page 102 and 103:
Setting up the Firebox for a Design
Page 104 and 105:
Setting Global Logging and Notifica
Page 106 and 107:
Setting Global Logging and Notifica
Page 108 and 109:
Types of Log MessagesTypes of Log M
Page 110 and 111:
LogViewer SettingsLogViewer Setting
Page 112 and 113:
Using LogViewerSearching in LogView
Page 114 and 115:
Using LogViewerTo convert a log fil
Page 116 and 117:
Changing Firebox Interface IP Addre
Page 118 and 119:
Changing Firebox Interface IP Addre
Page 120 and 121:
About Multiple WAN Support3 Under H
Page 122 and 123:
About Multiple WAN SupportConfiguri
Page 124 and 125:
Adding Secondary NetworksIf your Fi
Page 126 and 127:
Configuring Dynamic DNSMake sure th
Page 128 and 129:
Configuring RoutesFor more informat
Page 130 and 131:
Configuring Related Hostsfor that I
Page 132 and 133:
Using Dynamic NATUsing Dynamic NATD
Page 134 and 135:
Using 1-to-1 NAT4 Click OK. Save th
Page 136 and 137:
Using 1-to-1 NATa VPN tunnel is con
Page 138 and 139:
Configuring Static NAT for a Policy
Page 140 and 141:
How User Authentication Worksvent a
Page 142 and 143:
Configuring the Firebox as an Authe
Page 144 and 145:
Configuring the Firebox as an Authe
Page 146 and 147:
Configuring SecurID Authentication6
Page 148 and 149:
Configuring LDAP Authentication3 In
Page 150 and 151:
Configuring a Policy with User Auth
Page 152 and 153:
Configuring a Policy with User Auth
Page 154 and 155:
Using Default Packet Handling Optio
Page 156 and 157:
Setting Blocked Sitesconfigure the
Page 158 and 159:
Setting Blocked SitesUsing an exter
Page 160 and 161:
Blocking PortsBlocking PortsYou can
Page 162 and 163:
Blocking Ports144 WatchGuard System
Page 164 and 165:
Adding Policies• Attacks that use
Page 166 and 167:
Adding Policies4 Click Add.The New
Page 168 and 169:
Configuring Policy Properties- ESP-
Page 170 and 171:
Configuring Policy Properties2 To a
Page 172 and 173:
Configuring Policy PropertiesRepeat
Page 174 and 175:
Configuring Policy PropertiesSettin
Page 176 and 177:
Setting Policy Precedence2 Traffic
Page 178 and 179:
Setting Policy Precedence160 WatchG
Page 180 and 181:
Defining RulesThe fields you use fo
Page 182 and 183:
Customizing Logging and Notificatio
Page 184 and 185:
Configuring the SMTP ProxyConfiguri
Page 186 and 187:
Configuring the SMTP Proxyand 8-bit
Page 188 and 189:
Configuring the SMTP ProxyDefining
Page 190 and 191:
Configuring the FTP Proxy2 For info
Page 192 and 193:
Configuring the HTTP ProxyConfiguri
Page 194 and 195:
Configuring the HTTP ProxyBrowsers
Page 196 and 197:
Configuring the HTTP ProxyThis rule
Page 198 and 199:
Configuring the DNS ProxyConfigurin
Page 200 and 201:
Configuring the DNS ProxyAdding a n
Page 202 and 203:
Configuring the TCP Proxy184 WatchG
Page 204 and 205:
Creating and Editing ReportsStartin
Page 206 and 207:
Setting Report Properties“yesterd
Page 208 and 209:
Exporting ReportsSetting report pro
Page 210 and 211:
Using Report FiltersExcludeTo make
Page 212 and 213:
Report Sections and Consolidated Se
Page 214 and 215:
Report Sections and Consolidated Se
Page 216 and 217:
WatchGuard Management Server Passph
Page 218 and 219:
Changing the Management Server Conf
Page 220 and 221:
Configuring the Certificate Authori
Page 222 and 223:
Backing up or Restoring the Managem
Page 224 and 225:
Moving the WatchGuard Management Se
Page 226 and 227:
Managing Devices with the Managemen
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Adding Devices to the Management Se
Page 234 and 235:
Using the Device Management Page17
Page 236 and 237:
Using the Device Management PageCon
Page 238 and 239:
Monitoring VPNsAdding a Firebox VPN
Page 240 and 241:
PKI in a WatchGuard VPNPKI in a Wat
Page 242 and 243:
Managing the Certificate Authority2
Page 244 and 245:
Tunneling ProtocolsVirtual private
Page 246 and 247:
IP Addressingsecurity of the networ
Page 248 and 249:
Network TopologyThis topology is th
Page 250 and 251:
WatchGuard VPN SolutionsSplit tunne
Page 252 and 253:
VPN Scenarios• You make tunnels b
Page 254 and 255:
VPN ScenariosSmall Company Using Ex
Page 256 and 257:
Adding VPN Resourcesapplies a VPN r
Page 258 and 259:
Making Tunnels Between Devices3 To
Page 260 and 261:
Removing Tunnels and Devices2 Expan
Page 262 and 263:
Configuring a GatewayTo configure t
Page 264 and 265:
Making a Manual Tunnel18 When you c
Page 266 and 267:
Making a Manual Tunnel7 From the Ty
Page 268 and 269:
Making a Tunnel Policy2 Make the ch
Page 270 and 271:
Setting up Outgoing Dynamic NAT thr
Page 272 and 273:
Working with Devices on a Managemen
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Scheduling Firebox X Edge Firmware
Page 280 and 281:
Using the Firebox X Edge Management
Page 282 and 283:
Using the Firebox X Edge Management
Page 284 and 285:
Using the Firebox SOHO 6 Management
Page 286 and 287:
Creating and Applying Edge Configur
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Managing Firebox X Edge Network Set
Page 294 and 295:
Using AliasesNaming aliases on the
Page 296 and 297:
Using Aliases3 Click Aliases.The al
Page 298 and 299: Configuring WINS and DNS Servers•
Page 300 and 301: Adding New Users to the PPTP_Users
Page 302 and 303: Preparing the Client Computers- To:
Page 304 and 305: Creating and Connecting a PPTP RUVP
Page 306 and 307: Creating and Connecting a PPTP RUVP
Page 308 and 309: Getting Started with WebBlocker4 In
Page 310 and 311: Activating WebBlocker4 Click Next.5
Page 312 and 313: Configuring WebBlocker2 Select the
Page 314 and 315: Configuring WebBlocker3 Click the A
Page 316 and 317: Scheduling a WebBlocker Action298 W
Page 318 and 319: Installing the Software Licensespam
Page 320 and 321: Activating spamBlocker3 From Policy
Page 322 and 323: Creating Rules for Bulk and Suspect
Page 324 and 325: Customizing spamBlocker Using Multi
Page 326 and 327: Installing the Software LicensesIns
Page 328 and 329: Configuring Gateway AntiVirusConfig
Page 330 and 331: Configuring Gateway AntiVirus2 To s
Page 332 and 333: Activating Intrusion Prevention (IP
Page 334 and 335: Configuring Intrusion PreventionCon
Page 336 and 337: Configuring Intrusion Prevention2 S
Page 338 and 339: Configuring Intrusion PreventionCon
Page 340 and 341: Getting Intrusion Prevention Servic
Page 342 and 343: Creating QoS Actionsmanagement syst
Page 344 and 345: Dynamic RoutingDynamic RoutingA rou
Page 346 and 347: Using RIPSection Command Descriptio
Page 350 and 351: Using OSPF2 In the New Policy Prope
Page 352 and 353: Using OSPFSection Command Descripti
Page 354 and 355: Using OSPF4 Click Import to import
Page 356 and 357: Using BGPRegion Registry Name Web S
Page 358 and 359: Using BGPConfiguring Fireware Pro t
Page 360 and 361: Using BGP342 WatchGuard System Mana
Page 362 and 363: Selecting a Primary High Availabili
Page 364 and 365: Configuring HA for Firebox X (non e
Page 366 and 367: Upgrading Software in an HA Configu
Page 368 and 369: (B) To use the SOFTWARE PRODUCT on
Page 370 and 371: RENEWAL/UPGRADE REQUEST WILL NOT BE
Page 372 and 373: conditions of use by WatchGuard of
Page 374 and 375: LicensesDATA, OR PROFITS; OR BUSINE
Page 376 and 377: Licenses"Derivative Works" shall me
Page 378 and 379: LicensesANY DIRECT, INDIRECT, INCID
Page 380 and 381: Licenses2. You may modify your copy
Page 382 and 383: Licenses8. You may not copy, modify
Page 384 and 385: LicensesYou may charge a fee for th
Page 386 and 387: LicensesINCLUDING, BUT NOT LIMITED
Page 388 and 389: Licenses1.2. "Compilation" means a
Page 390 and 391: LicensesTHE VRT CERTIFIED RULES AND
Page 392 and 393: LicensesNoteAll other trademarks or
Page 394 and 395: Default File LocationsFile TypeHelp
Page 396 and 397: Default File Locations378 WatchGuar
Page 398 and 399:
Packet Filter PoliciesAOLThe Americ
Page 400 and 401:
Packet Filter PoliciesCharacteristi
Page 402 and 403:
Page 404 and 405:
Packet Filter PoliciesIRCInternet R
Page 406 and 407:
Page 408 and 409:
Packet Filter PoliciesPPTPPPTP is a
Page 410 and 411:
Packet Filter PoliciesSecurIDRSA Se
Page 412 and 413:
Page 414 and 415:
Packet Filter Policies• Port Numb
Page 416 and 417:
Packet Filter PoliciesWG-SmallOffic
Page 418 and 419:
Proxied Policiesmessages to flow fr
Page 420 and 421:
about SYN flood setting 137address
Page 422 and 423:
Domain Name System. See DNSDon’t
Page 424 and 425:
selecting for tunnel 247Gateways di
Page 426 and 427:
icon on toolbar for 4installing on
Page 428 and 429:
Perfect Forward Secrecy 248Performa
Page 430 and 431:
Secondary Networks dialog box 107Se
Page 432:
Wand strong passwords 227and WatchG
show all

WSM User Guide - WatchGuard Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?