12.07.2015 Views

WSM User Guide - WatchGuard Technologies

WSM User Guide - WatchGuard Technologies

WSM User Guide - WatchGuard Technologies

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Getting Started with WebBlocker4 In the Add Firebox License Key dialog box, type or paste your license key. You can click Import tofind it on your computer or network. Click OK.The license key appears on the Firebox License Keys dialog box.Getting Started with WebBlockerYou can install the WebBlocker Server on your <strong>WatchGuard</strong>® management station when you first do thesetup for <strong>WatchGuard</strong> System Manager. You can also install the WebBlocker Server software on a differentcomputer. To do this, use the same method as you used to install the <strong>WatchGuard</strong> System Managersoftware, but select only the WebBlocker Server component.Operating systems that are supported for the WebBlocker Server are Windows 2000 and Windows 2003.NoteIf you install one of the <strong>WSM</strong> servers on a computer with a personal firewall other than the MicrosoftWindows firewall, you must open the ports for the servers to connect through the firewall. To allowconnections to the WebBlocker Server, open UDP port 5003. It is not necessary to change yourconfiguration if you use the Microsoft Windows firewall. See the “Getting Started” chapter for moreinformation.Before you configure WebBlocker, you must download the WebBlocker database.1 Right-click the WebBlocker Server icon in the toolbar at the bottom of the screen.2 Select Get Full Database.The Download WebBlocker Database dialog box appears.3 Select Download to download the new database.NoteThe WebBlocker database has more than 95 MB of data. Your connection speed sets the downloadspeed, and the download can be more than 30 minutes. Make sure the hard disk drive has a minimum of200 MB of free space.You can use the WebBlocker utility at any time to:• Download a new version of the database• See the database status• Start or stop the serverTo get an incremental update of the WebBlocker database, you must first stop the WebBlocker Serverservice. To stop the service, right click the WebBlocker Server icon on the <strong>WatchGuard</strong> toolbar and selectStop Service.290 <strong>WatchGuard</strong> System Manager

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!