WSM User Guide - WatchGuard Technologies

Creating and Applying Edge Configuration TemplatesAdding a Firebox SOHO 6 VPN TunnelThe Firebox SOHO 6 management page shows all tunnels that include the device in the Tunnels section.You can also add a VPN tunnel in this section.1 On the Firebox SOHO 6 management page, find the VPN Tunnels section.This section shows all tunnels that include this device.2 Click Add to add a new VPN tunnel.The Add VPN Wizard starts. Configure the VPN to match your VPN requirements.Creating and Applying Edge Configuration TemplatesWhen you use Firebox® X Edge devices with the WatchGuard® Management Server, you can create EdgeConfiguration Templates on the Management Server. You can then apply those Edge ConfigurationTemplates to Edge devices. With Edge Configuration Templates, you can easily configure standard firewallfilters, change the blocked sites list, change your WebBlocker configuration, or change other policysettings for all or some of your managed Edge devices.NoteEdge Configuration Templates can be used with the Firebox X Edge only. Each Edge can have only oneEdge Configuration Template. An Edge must have firmware version 7.5 or later to use EdgeConfiguration Templates.You can make changes to an Edge Configuration Template or the list of devices to which the policy hasbeen applied at any time. The Management Server automatically makes the changes.1 Start WatchGuard System Manager and connect to the Management Server.2 Click the Device Management tab.You can expand the list of Edge Configuration Templates to see any Edge Configuration Templates that have beencreated. If you have not created any Edge Configuration Templates, this list is empty.268 WatchGuard System Manager