WSM User Guide - WatchGuard Technologies

Scheduling Firebox X Edge Firmware Updates14 You can select an existing contact record for this device, or click Add to add a new contact record forthis device. To delete an existing contact record, select it and click Delete.15 Click Next. The Configure the Device screen appears. Click Next on this screen to configure thedevice with the new management settings and add it to the Management Server. If the device isalready managed by another server, or configured for management by this server, a warning dialogbox appears. Click Yes to continue.You cannot configure Firebox SOHO devices with the Management Server.16 Click Close to close the Add New Device wizard.Scheduling Firebox X Edge Firmware UpdatesFirebox® X Edge devices must have a firmware update to operate with the advanced features of theManagement Server. In the future, more firmware updates could be required. These firmware updatesare installed on the Management Server, and the Management Server loads them on the Edge devices.WatchGuard® System Manager can install firmware updates to a group of Edge devices easily. You canupdate firmware on groups of devices with one operation, either immediately or on a schedule.You get firmware updates from LiveSecurity.1 In the Device Management tab in WatchGuard System Manager, select the Management Server.The Management Server settings page appears.User Guide 259