12.07.2015 Views

WSM User Guide - WatchGuard Technologies

WSM User Guide - WatchGuard Technologies

WSM User Guide - WatchGuard Technologies

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>WatchGuard</strong> System Manager (<strong>WSM</strong>) <strong>User</strong> Interface• IP address and netmask of the default gateway (for external interface only).• Media Access Control (MAC) address of the interface.• Number of packets sent and received on each interface since the last Firebox restart.Branch Office VPN TunnelsBelow the Firebox Status is a section on branch office virtual private network (BOVPN) tunnels. There aretwo types of IPSec BOVPN tunnels: VPN tunnels built manually using Policy Manager and VPN tunnelsbuilt using the Management Server.An expanded entry for a BOVPN tunnel shows this information:• The tunnel name, the IP address of the destination IPSec device, and the tunnel type. If the tunnelis managed by the Management Server, the IP address refers to the full remote network address.• The volume of data sent and received on the tunnel in bytes and packets.• The time before the key expires and when the tunnel is created again. This appears as a time limitor as the number of bytes. If you use the Management Server to configure a tunnel to expireusing time and volume limits, the two expiration values appear.• Authentication and encryption layers set for the tunnel.• Routing policies for the tunnel.Mobile <strong>User</strong> VPN tunnelsAfter the branch office VPN tunnels entry is an entry for Mobile <strong>User</strong> VPN tunnels. This entry shows thesame information as for Branch Office VPN tunnels. It includes the tunnel name, the destination IPaddress, and the tunnel type. Packet information, the key expiration date, authentication, and encryptiondata also appear.PPTP VPN tunnelsFor PPTP RUVPN tunnels, <strong>WatchGuard</strong> System Manager shows only the quantity of sent and receivedpackets. The volume of bytes and total volume of bytes are not applicable to PPTP tunnels.Connection statusThe tree view for each device shows one of four possible states. The status descriptions are as follows:No exclamation point and gray iconThe device is being contacted for the first time or has not been contacted yet.Normal iconUsual operation. The device is successfully sending data to <strong>WatchGuard</strong> System Manager.6 <strong>WatchGuard</strong> System Manager

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!