WSM User Guide - WatchGuard Technologies

Adding Devices to the Management Server10 In the Hostname/IP address text box, type the static IP address or host name of the Firebox. Fordevices that use a dynamic IP address, type the Dynamic DNS service client name.If the device has a dynamic IP address but does not use the Dynamic DNS service, type a unique name for the device.The name you type here must match the name you enter in Policy Manager for that device (if the device is a FireboxIII, Firebox X Core or X Peak). If the device is a Firebox X Edge or SOHO, this name must match the name you givethe device when you enable the device as a managed client with the web configuration manager.11 Type the status passphrase. This is the status (read-only) passphrase for the Firebox you are addingto the Management Server.12 Type the configuration passphrase. This is the configuration (read-write) passphrase for the Fireboxyou are adding to the Management Server.13 If the Firebox uses a dynamic IP address, type the shared secret. The shared secret you type heremust match the shared secret you type in the device’s configuration when you enable it as amanaged client.14 Click Next.The Configure WINS and DNS screen appears.15 Type primary and secondary addresses for the WINS and DNS servers this device uses, if any.16 Type the domain name for this device, if any. Click Next.The Provide Contact Information screen appears.User Guide 215