WSM User Guide - WatchGuard Technologies
WSM User Guide - WatchGuard Technologies WSM User Guide - WatchGuard Technologies
Adding Devices to the Management Server4 Select the Management Server from the list at the left of the window.The Management Server page appears.5 Expand the Devices folder.All devices managed by this Management Server are shown here.6 Select Edit > Insert Device, or right-click in the left frame of this window and select Insert Device.The Add Device wizard starts.7 Click Next to see the first configuration screen.8 In the Display Name text box, type a name for the device.This name cannot include any spaces or the period (dot) character.9 From the Device Type drop-down list, select the model of the Firebox you want to add to theManagement Server configuration.214 WatchGuard System Manager
Adding Devices to the Management Server10 In the Hostname/IP address text box, type the static IP address or host name of the Firebox. Fordevices that use a dynamic IP address, type the Dynamic DNS service client name.If the device has a dynamic IP address but does not use the Dynamic DNS service, type a unique name for the device.The name you type here must match the name you enter in Policy Manager for that device (if the device is a FireboxIII, Firebox X Core or X Peak). If the device is a Firebox X Edge or SOHO, this name must match the name you givethe device when you enable the device as a managed client with the web configuration manager.11 Type the status passphrase. This is the status (read-only) passphrase for the Firebox you are addingto the Management Server.12 Type the configuration passphrase. This is the configuration (read-write) passphrase for the Fireboxyou are adding to the Management Server.13 If the Firebox uses a dynamic IP address, type the shared secret. The shared secret you type heremust match the shared secret you type in the device’s configuration when you enable it as amanaged client.14 Click Next.The Configure WINS and DNS screen appears.15 Type primary and secondary addresses for the WINS and DNS servers this device uses, if any.16 Type the domain name for this device, if any. Click Next.The Provide Contact Information screen appears.User Guide 215
- Page 182 and 183: Customizing Logging and Notificatio
- Page 184 and 185: Configuring the SMTP ProxyConfiguri
- Page 186 and 187: Configuring the SMTP Proxyand 8-bit
- Page 188 and 189: Configuring the SMTP ProxyDefining
- Page 190 and 191: Configuring the FTP Proxy2 For info
- Page 192 and 193: Configuring the HTTP ProxyConfiguri
- Page 194 and 195: Configuring the HTTP ProxyBrowsers
- Page 196 and 197: Configuring the HTTP ProxyThis rule
- Page 198 and 199: Configuring the DNS ProxyConfigurin
- Page 200 and 201: Configuring the DNS ProxyAdding a n
- Page 202 and 203: Configuring the TCP Proxy184 WatchG
- Page 204 and 205: Creating and Editing ReportsStartin
- Page 206 and 207: Setting Report Properties“yesterd
- Page 208 and 209: Exporting ReportsSetting report pro
- Page 210 and 211: Using Report FiltersExcludeTo make
- Page 212 and 213: Report Sections and Consolidated Se
- Page 214 and 215: Report Sections and Consolidated Se
- Page 216 and 217: WatchGuard Management Server Passph
- Page 218 and 219: Changing the Management Server Conf
- Page 220 and 221: Configuring the Certificate Authori
- Page 222 and 223: Backing up or Restoring the Managem
- Page 224 and 225: Moving the WatchGuard Management Se
- Page 226 and 227: Managing Devices with the Managemen
- Page 228 and 229: Managing Devices with the Managemen
- Page 230 and 231: Managing Devices with the Managemen
- Page 234 and 235: Using the Device Management Page17
- Page 236 and 237: Using the Device Management PageCon
- Page 238 and 239: Monitoring VPNsAdding a Firebox VPN
- Page 240 and 241: PKI in a WatchGuard VPNPKI in a Wat
- Page 242 and 243: Managing the Certificate Authority2
- Page 244 and 245: Tunneling ProtocolsVirtual private
- Page 246 and 247: IP Addressingsecurity of the networ
- Page 248 and 249: Network TopologyThis topology is th
- Page 250 and 251: WatchGuard VPN SolutionsSplit tunne
- Page 252 and 253: VPN Scenarios• You make tunnels b
- Page 254 and 255: VPN ScenariosSmall Company Using Ex
- Page 256 and 257: Adding VPN Resourcesapplies a VPN r
- Page 258 and 259: Making Tunnels Between Devices3 To
- Page 260 and 261: Removing Tunnels and Devices2 Expan
- Page 262 and 263: Configuring a GatewayTo configure t
- Page 264 and 265: Making a Manual Tunnel18 When you c
- Page 266 and 267: Making a Manual Tunnel7 From the Ty
- Page 268 and 269: Making a Tunnel Policy2 Make the ch
- Page 270 and 271: Setting up Outgoing Dynamic NAT thr
- Page 272 and 273: Working with Devices on a Managemen
- Page 274 and 275: Working with Devices on a Managemen
- Page 276 and 277: Working with Devices on a Managemen
- Page 278 and 279: Scheduling Firebox X Edge Firmware
- Page 280 and 281: Using the Firebox X Edge Management
Adding Devices to the Management Server4 Select the Management Server from the list at the left of the window.The Management Server page appears.5 Expand the Devices folder.All devices managed by this Management Server are shown here.6 Select Edit > Insert Device, or right-click in the left frame of this window and select Insert Device.The Add Device wizard starts.7 Click Next to see the first configuration screen.8 In the Display Name text box, type a name for the device.This name cannot include any spaces or the period (dot) character.9 From the Device Type drop-down list, select the model of the Firebox you want to add to theManagement Server configuration.214 <strong>WatchGuard</strong> System Manager