WSM User Guide - WatchGuard Technologies

Setting Blocked Sites3 Use the Choose Type drop-down list to select a member type. The selections are Host IP, NetworkIP, or Host Range.4 Type the member value.The member type shows if this is an IP address or a range of IP addresses. When you type an IP address, type all thenumbers and the period. Do not use the tab or the arrow key.5 Select OK.The new site appears in the Blocked Sites list.Blocking spyware sitesYou can block spyware by configuring categories of spyware sites to block.1 From the Blocked Sites dialog box, select the Enable Antispyware Blocklist blocking check box.2 By default, the Firebox blocks all categories of spyware when you select the check box in theprevious step. To choose which categories of spyware you want to block, click Configure.The Antispyware Blocklist Categories dialog box appears.3 Select or clear the following check boxes to enable or disable antispyware blocking for thesecategories. To enable or disable all categories, select or clear the All Spyware Categories checkbox:AdwareA software application in which advertising banners are shown while the program is inoperation. It sometimes includes code that records a user's personal information and sends it tothird parties, without the user's authorization or knowledge.DialerA software application that can hijack a user’s modem and dial toll numbers that get access toinappropriate web sites.DownloaderA program that gets and installs other files. Most are configured to get files from a designatedweb or FTP site.HijackerA type of malware program that changes your computer's browser settings and redirects you toweb sites that you did not plan to browse to.TrackwareAny software that uses a computer’s Internet connection to send personal information withoutthe user’s permission.User Guide 139