WSM User Guide - WatchGuard Technologies

Configuring Dynamic DNSSetting up the Firebox for Dynamic DNS1 From Policy Manager, select Network > Configuration. Click the Dynamic DNS tab.The information on the Dynamic DNS tab appears.2 Select the external interface you want to configure Dynamic DNS for and click Configure.The Per Interface Dynamic DNS dialog box appears.3 To enable Dynamic DNS, select the Enable Dynamic DNS check box.4 Type the user name, password, and domain name you used to set up your Dynamic DNS account.5 In the Service Type drop-down list, select the system to use for this update:- dyndns sends updates for a Dynamic DNS host name.- statdns sends updates for a Static DNS host name.- custom sends updates for a Custom DNS host name.For more information on each option, see http://www.dyndns.com/services/.6 In the Options field, you can type any of the options shown below. You must type an “&” characterbefore and after each option you add. If you add more than one option, you must separate theoptions with the “&” character. For example: &backmx=NO&wildcard=ON&mx=mailexchangerbackmx=YES|NOwildcard=ON|OFF|NOCHGoffline=YES|NOUser Guide 109