WSM User Guide - WatchGuard Technologies

Setting Global Logging and Notification Preferences2 Click Advanced Diagnostics.The Advanced Diagnostics dialog box appears.3 Select a category from the category list.A description of the category appears in the Description box.4 Use the slider below Settings to set the level of information that a log of each category includes inits log message. When the lowest level is set, diagnostic messages for that category are turned off.When the highest level is set, you can set the detail level for the diagnostic log messages.5 To show diagnostic messages in Traffic Manager, select the Display diagnostic messages in TrafficMonitor check box. This can be useful to quickly diagnose a problem.6 To have the Firebox collect a packet trace for IKE packets, select the Enable IKE packet tracing toFirebox internal storage check box. To see the packet trace information the Firebox collects, startFirebox System Manager and click the Status tab. Click Support to have Firebox System Managerget the packet trace information from the Firebox.7 Remember to turn off diagnostic logs when done.Setting Global Logging and Notification PreferencesTo see the Log Server status and configuration, click the Log Server icon on the WatchGuard® toolbarand select Status/Configuration. The status and configuration information appears. There are threecontrol areas:Log Files tabTo set the options for rolling your log file.Reports tabTo schedule regular reports of log entries.86 WatchGuard System Manager