MOLY BENTONE GREASE.pdf

PRODUCT SAFETY DATA SHEET1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANYName of Manufacturer/Supplier: Chemodex LimitedCanal Road, Worksop, Notts, S80 2EH.Tel: (01909) 473301 Fax: (01909) 500961Product Name: MOLY BENTONE MP 1, 2 & 3 GREASE2. COMPOSITION/INFORMATION ON INGREDIENTSHazardous Ingredient Risk Phrases Concentration ClassificationNone3. HAZARDS IDENTIFICATIONMain HazardsNot classified as hazardous.Health Effects Eyes May cause slight transient irritation.Health Effects Skin Repeated or prolonged contact may lead to dermatitis.4. FIRST AID MEASURESEye ContactSkin ContactIngestionWash out eye with plenty of water. Obtain medical attention if sorenessor redness persistsWash skin with soap and water. If grease has been injected under theskin, seek medical advice immediately.Do not induce vomiting. Obtain medical attention.5. FIRE FIGHTING MEASURESExtinguishing Media Use foam, dry chemical or carbon dioxide. Do not use water jet,Special Hazards of Product This product may give rise to hazardous fumes in a fire.Protective Equipment for Wear self-contained breathing apparatus.Fire-Fighting.6. ACCIDENTAL RELEASE MEASURESPersonal Precautions Material can create slippery conditions underfoot.SpillagesTransfer into suitable containers for recover or disposal.7. HANDLING AND STORAGEHandlingWhen applying by grease gun, care must be taken not to inject thisproduct under the skin.StorageStorage temperature should be controlled between 1-40°C.8. EXPOSURE CONTROL/PERSONAL PROTECTIONEngineering Controls No specific measures necessary.Eye ProtectionNo specific measures necessary.Hand ProtectionPVC Gloves.Body ProtectionNormal workwear.9. PHYSICAL AND CHEMICAL PROPERTIESPhysical State Grease Colour Grey/BlackOdour Odourless Melting Point Melts above 250°CFlash Point (PMCC) Exceed 150°C Solubility in Water Insoluble.Density (kg/m3) >0.96 (measured kg/ltr) Auto-Flammability Above 200°C

Product Name: MOLY BENTONE 1, 2 & 3 MP GREASE10. STABILITY AND REACTIVITYStabilityStable under normal conditions.Conditions to Avoid No specific measures necessary.Materials to Avoid Strong oxidising agents.Hazardous Decomposition Combustion will generate: smoke, possible thick and choking, resultingProductsin zero visibility.11. TOXICOLOGICAL INFORMATIONAcute ToxicityLow order of acute toxicity.12. ECOLOGICAL INFORMATIONMobilityThe product is insoluble in water. If released to water the product willfloat. The product is poorly absorbed onto soils or sediments.Persistence/Degradability The product is expected to be resistant to biodegradation,Bio-Accumulation Product is not expected to bio-accumulate.13. DISPOSAL RECOMMENDATIONSProduct DisposalIncineration or landfill. Dispose of in accordance with all applicablelocal and national regulations.Container Disposal No specific measures necessary.14. TRANSPORT INFORMATIONUN ClassNot classifiedADR/RID ClassNot classifiedIMDG ClassNot classifiedIATA ClassNot classified15. REGULATORY INFORMATIONLabelling Information No statutory label required.Risk PhrasesNoneSafety PhrasesNone16. OTHER INFORMATIONProduct UseFor industrial use only. LubricantEC LegislationEC Directive 91/155/eec defining the laying down and detailedarrangements for the system of specific information relating to DangerousPreparations Directive - 2001/58/EC. EC Directive 1999/45/EECrelating to the classification, packaging and labelling of dangerouspreparations.To the best of our knowledge, the information contained herein is accurate. Although certain hazardsmay be described we cannot predict that these are the only hazards, or combination of hazards, that mayexist in a workplace. This MSDS, therefore, forms a component only of a risk assessment carried outby, or on behalf of the user.Last Revision Date: 02/04/03