Chapter 10: Management and quality assurance - Antares - IN2P3

More documents

Recommendations

Info

PBS Product Breakdown StructurePE Polyethylenepe photoelectronPIC Microcontroller from MICROCHIP companyPIFC Polarisation-Insensitive Fibre optic CirculatorPLL Phase Lock LoopPMT PhotoMultiplier TubePSD Pulse Shape DiscriminatorPSL Prototype Sector LinePU PolyurethaneRMS Root Mean Square (also rms)RoR Read out RequestROV Remote Operated VehicleRTS Reset Time StampRTOS Real Time Operating SystemSC Slow ControlSCC Serial Communication ControllerSCM String Control ModuleSDRAM Synchronous Dynamic Random Access MemorySPE Single Photo ElectronSPI Serial Peripheral InterfaceSPM String Power ModuleTDR Technical Design ReportTCP/IP Transmission Control Protocol/Internet ProtocolTT Time TransitTTS Time Transit SpreadTVC Time to Voltage ConverterUV Ultra-VioletWDM Wavelength Division MultiplexingWF Waveform
List of units used in the TDRThroughout the TDR, we have used standard SI units. Please refer to the WEB for the precisedefinitions. One example is http://www.ex.ac.uk/cimt/dictunit/dictunit.htm#SI.Some commonly used non standard units have been accepted. Here are the definitions:●●●●●bar: unit of static pressure inside a fluid (absolute or differential) =10 5 Pabarg: "bar-gauge", gauge pressure scale derived from "bar" unit: P[barg]=Pabsolute[bar] -1. (Subtract atmospheric pressure)inch: (or ") the use is restricted to the 8" or 10" photomultipliers.PSU: Practical Salinity Unit" = S/1000, where S is the "Practical Salinity" of sea water. Forthe (revised 1978) definition of S, see: http://www.start.or.th/got/data/techsupp/pss78.htm(Sea water) Buoyancy: vertical force acting on a solid, which results from the balancebetween gravity and the buoyant force in sea water; the specific mass =1 033. kg/m 3 byconvention. The buoyancy is positive if upwards, negative if downwards: B = g (ρ water .V -M) for a rigid body of mass M and volume V, where g is the acceleration due to gravity andρ water is the water density.Note 1: 1.033 10 3 kg/m 3 is the "typical" sea water density seen during an ANTARESdeployment/recovery at a depth of 1000 m, with a temperature of 13 ° C and a salinity of 38 PSU.Note 2: for the (effective) acceleration of gravity in the Provence coast area, take g=9.805 m/s 2(sea-level value at Marseille).
Page 3 and 4: Resource ManagerP. de Witt-HubertsD
Page 5 and 6: Operational ReliabilityThis chapter
Page 7 and 8: constraints.Design ReviewEvaluation
Page 9 and 10: ● ground operations, comprising i
Page 11 and 12: ●liaise with the database manager
Page 13 and 14: ORACLE8i has been chosen for the da
Page 15 and 16: PBS1.2.6SPM/SCM ContainerHosts the
Page 17 and 18: PBS2.1.17LCM_DAQ/SCData and Slow Co
Page 19 and 20: PBS 4.- OM Optical ModulePBS4.1 Pho
Page 21 and 22: PBS5.3.6 BEACON_PMT Low voltage PMT
Page 23 and 24: PBS8.1.10 LF_TRANSD_LF _CABLEElectr
Page 25 and 26: Annexes●●●List of acronyms us
Page 27: FPGA Field Programmable Gate ArrayF
Page 31: INFN - Sezione di Bari (Bari)R. Bel

Chapter 10: Management and quality assurance - Antares - IN2P3

Create successful ePaper yourself

Delete template?

Save as template?