ARM DS-5 Using the Debug Hardware Configuration Utilities
ARM DS-5 Using the Debug Hardware Configuration Utilities
ARM DS-5 Using the Debug Hardware Configuration Utilities
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Configuring CoreSight systems6.2 Reading <strong>the</strong> CoreSight ROM tableIf <strong>the</strong> target system contains a valid CoreSight ROM table, you can use this to configure <strong>the</strong>AHB-AP and APB-AP devices behind <strong>the</strong> <strong>Debug</strong> Access Port (DAP).To configure CoreSight devices using a CoreSight ROM table:• If you are manually adding devices to <strong>the</strong> scan chain:1. Add <strong>the</strong> <strong>ARM</strong>CS-DP device.2. Right-click on <strong>the</strong> <strong>ARM</strong>CS-DP device, <strong>the</strong>n select <strong>the</strong> Read CoreSight ROMTable option.• If you are autoconfiguring scan chain, ensure that <strong>the</strong> Read CoreSight ROM Tablescheckbox is selected before you auto configure. The checkbox is selected by default.6.2.1 See alsoTasks• Setting up a CoreSight trace association file on page 6-11• Loading a trace association file on page 6-13Concepts• About CoreSight system configuration on page 6-2• CoreSight autodetection on page 6-4• How <strong>the</strong> debug hardware unit autodetects Serial Wire <strong>Debug</strong> on page 6-5.<strong>ARM</strong> DUI 0498F Copyright © 2010-2012 <strong>ARM</strong>. All rights reserved. 6-3ID021112Non-Confidential
Change language