ARM DS-5 Using the Debug Hardware Configuration Utilities

Creating debug hardware target configurations5.31 Disconnecting from a debug hardware unitYou might want to disconnect from a debug hardware unit if you want to connect to anotherdebug hardware unit.To disconnect from a debug hardware unit:1. Select the debug hardware node in the tree diagram to display the Debug Hardware Configutility. The following figure shows an example:Figure 5-18 Displaying the connection controls2. Click Disconnect.If you have unsaved configuration changes, a warning dialog box appears. The followingfigure shows an example:Figure 5-19 Warning when disconnecting with unsaved configuration changes3. In this warning dialog box:• Click Yes to disconnect, losing any unsaved configuration data.• Click No to remain connected. Save your changes, then disconnect.5.31.1 See alsoTasks• Connecting to a debug hardware unit on page 2-8• Creating a debug hardware configuration file on page 5-4• Saving your changes on page 5-49.ARM DUI 0498F Copyright © 2010-2012 ARM. All rights reserved. 5-50ID021112Non-Confidential