ARM DS-5 Using the Debug Hardware Configuration Utilities

Creating debug hardware target configurations5.10 Select Platform dialog boxThe Select Platform dialog box enables you to select a platform configuration that is suitable foryour development platform. The following figure shows an example:Figure 5-8 Select Platform dialog boxClick the OK button to select the chosen platform, in doing so the entire configuration for thatplatform is loaded.Click the Cancel button to cancel any selected action.Select to put the debug hardware unit into a known state if you have incorrectly loadeda platform. This resets all settings to the default values.5.10.1 See alsoTasks• Autodetecting a platform on page 5-41• Manually selecting a platform on page 5-43• Adding new platforms on page 5-45• Adding autoconfigure support for new platforms on page 5-46.Concepts• About platform detection and selection on page 5-40.ARM DUI 0498F Copyright © 2010-2012 ARM. All rights reserved. 5-18ID021112Non-Confidential