ARM DS-5 Using the Debug Hardware Configuration Utilities

Creating debug hardware target configurations5.5.3 CoreSight development platformsIf your development platform contains CoreSight devices, then autoconfiguration involves:1. Adding the ARM CoreSight Debug Port (ARMCS-DP) device.2. Reading the CoreSight ROM Table. This table contains a list of the CoreSight devicesincluded in your development platform.5.5.4 See alsoTasks• Adding devices to the scan chain on page 5-12• Removing devices from the scan chain on page 5-16• Changing the order of devices on the scan chain on page 5-17• Setting the clock speed on page 5-24• Configuring a JTAG scan chain on page 5-7• CoreSight autodetection on page 6-4.Setting up the ARM DSTREAM Hardware:• Connecting the DSTREAM unit on page 3-3.Setting up the ARM RVI and RVT Hardware:• Connecting the RVI hardware on page 3-5.Reference• Device Properties dialog box on page 5-21.ARM DUI 0498F Copyright © 2010-2012 ARM. All rights reserved. 5-10ID021112Non-Confidential