ARM DS-5 Using the Debug Hardware Configuration Utilities

Creating debug hardware target configurations5.2.1 See alsoTasks• Starting the debug hardware configuration utilities on page 2-3• Connecting to a debug hardware unit on page 2-8• Configuring a JTAG scan chain on page 5-7• Changing the properties of a device on page 5-23• Setting up a CoreSight trace association file on page 6-11• Configuring the debug hardware Advanced settings on page 5-47• Defining CoreSight trace associations on page 6-7.Concepts• About configuring a device list on page 5-9• CoreSight autodetection on page 6-4• About adaptive clocking on page 5-25• About CoreSight system configuration on page 6-2• CoreSight autodetection on page 6-4• About platform detection and selection on page 5-40• CoreSight topology and associations for the CoreSight DK11 on page 6-15• CoreSight topology and associations for the Cortex-R4 FPGA on page 6-17• CoreSight topology and associations for the Cortex-M3 FPGA on page 6-19• CoreSight topology and associations for multiple trace sources on page 6-21.Reference• Select Platform dialog box on page 5-18• Device Properties dialog box on page 5-21• Trace Association Editor dialog box on page 6-9• Debug hardware device configuration settings on page 5-26• Debug hardware Advanced configuration settings on page 5-33• Debug hardware Trace configuration settings on page 5-36• Trace Association Editor dialog box on page 6-9• About trace associations on page 6-6• Format of trace associations on page 6-8• Chapter 10 Troubleshooting your debug hardware unit.ARM DUI 0498F Copyright © 2010-2012 ARM. All rights reserved. 5-5ID021112Non-Confidential