ARM DS-5 Using the Debug Hardware Configuration Utilities
ARM DS-5 Using the Debug Hardware Configuration Utilities
ARM DS-5 Using the Debug Hardware Configuration Utilities
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Troubleshooting your debug hardware unit10.10 Log Client UtilityThe Log Client utility receives logging messages from a <strong>DS</strong>TREAM or RVI unit. The unit canbe connected over a network or USB.Output from all logging processes is displayed.10.10.1 Syntaxrvi_log_client rvi_unit_identifierrvi_log_client -helpwhere rvi_unit_identifier is <strong>the</strong> identifier for <strong>the</strong> RVI unit can be in any of <strong>the</strong> followingformats:IP Address Specify ei<strong>the</strong>r:xxx.xxx.xxx.xxxTCP:xxx.xxx.xxx.xxxFor example, TCP:100.16.89.12HostnameUSBSpecify ei<strong>the</strong>r:rvi_unit_nameTCP:rvi_unit_nameFor example, my-rvi-unit.Specify ei<strong>the</strong>rUSBUSB:usb_port_numberusb_port_number is <strong>the</strong> number shown in <strong>the</strong> tree control or <strong>the</strong> scan chainschematic diagram of <strong>the</strong> <strong>Debug</strong> <strong>Hardware</strong> Config utility, for example:Figure 10-11 USB port number in <strong>the</strong> <strong>Debug</strong> <strong>Hardware</strong> Config utilityIn this example, <strong>the</strong> port number is 111410315.10.10.2 UsageSpecify -h or -help to display <strong>the</strong> help message and usage information.Press Ctrl+C to close <strong>the</strong> Log Client utility.<strong>ARM</strong> DUI 0498F Copyright © 2010-2012 <strong>ARM</strong>. All rights reserved. 10-13ID021112Non-Confidential
Change language