ARM DS-5 Using the Debug Hardware Configuration Utilities

Troubleshooting your debug hardware unit10.7 Remove button is disabled in the Debug Hardware Config utilityThe Remove button is disabled in the Debug Hardware Config utility when you have a platformassigned to your debug hardware configuration.If you want to remove a device from the scan chain:1. Click Clear Platform.2. Either:• autoconfigure the scan chain again• manually add only those devices you want to keep.10.7.1 See alsoTasks• Autoconfiguring a scan chain on page 5-11• Clearing a platform assignment from a debug hardware configuration on page 5-44.• Adding devices to the scan chain on page 5-12.ARM DUI 0498F Copyright © 2010-2012 ARM. All rights reserved. 10-8ID021112Non-Confidential